Multihead/ Multiseat Setup Problem
Ich habe da noch ein Problem: Für die Kinder von Bekannten würde ich gern einen Rechner mit einem Mutliseat-Setup versehen, damit die sich nicht mehr beide streiten müssen. Da ich noch eine Tastatur und Maus, sowie einen Monitor da habe, der sonst weg fliegt wäre so ein Multiseat-Setup nat. ideal. Hier die Config: PC mit einer GraKa Nvidia GeForce 8400 GS AGP mit 1x DVI 1x VGA 1x SVHS/ TV-out OS: openSUSE 12.1 (x86_64) Kernel: 3.4.2-2-desktop NVidia-Treiber: 295.53 Ich habe als erstes mit "nvidia-settings" eine Dualmonitor- xorg.conf und zwei X-screens erzeugt. Also kein TwinView! Die beiden X-Screens haben auch funktioniert. Nachdem also beide X-Screens da waren, habe ich die xorg.conf nach folgenden Anleitungen angepasst: http://forums.opensuse.org/english/get-technical-help-here/hardware/463718-o... https://wiki.archlinux.org/index.php/Xorg_multiseat Hier meine xorg.conf: ------------------------------------------------------------------------------------------------------------- Section "ServerFlags" Option "AllowMouseOpenFail" "on" Option "AutoAddDevices" "off" Option "ZapWarning" "on" Option "Xinerama" "0" EndSection Section "ServerLayout" Identifier "seat0" Screen "Screen0" 0 0 InputDevice "keyboard0" "CoreKeyboard" InputDevice "mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "ServerLayout" Identifier "seat1" Screen "Screen1" 0 0 InputDevice "keyboard1" "CoreKeyboard" InputDevice "mouse1" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" Identifier "mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mouse0" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "mouse1" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mouse1" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "keyboard0" Driver "evdev" Option "Protocol" "Standard" Option "XkbLayout" "de" Option "XkbRules" "xfree86" Option "Device" "/dev/input/by-id/usb-04f3_0103-event-kbd" EndSection Section "InputDevice" Identifier "keyboard1" Driver "evdev" Option "Protocol" "Standard" Option "XkbLayout" "de" Option "XkbRules" "xfree86" Option "Device" "/dev/input/by-id/usb-046a_0011-event-kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "IBM" HorizSync 31.5 - 93.8 VertRefresh 56.0 - 120.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Medion MD1772xe" HorizSync 30.0 - 70.0 VertRefresh 50.0 - 120.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8400 GS" BusID "PCI:1:0:0" Screen 0 Option "Enable" "true" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8400 GS" BusID "PCI:1:0:0" Screen 1 Option "Enable" "true" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: 1280x1024_85 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-1" Option "metamodes" "CRT-1: 1024x768 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection ------------------------------------------------------------------------------------------------------------- Nun wird der Screen0 erfolgreich geladen und in KDE eingeloggt. Nur der zweite X-Screen (Screen1) geht nicht (Auszug): ----------------------------- /var/log/Xorg.1.log ------------------------------------------------------- [ 26.272] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 26.273] (EE) Screen 0 deleted because of no matching config section. [ 26.273] (II) UnloadModule: "nvidia" [ 26.273] (II) Unloading nvidia [ 26.273] (II) UnloadModule: "wfb" [ 26.273] (II) Unloading wfb [ 26.273] (II) UnloadModule: "fb" [ 26.273] (II) Unloading fb [ 26.273] (EE) Device(s) detected, but none match those in the config file. [ 26.273] Fatal server error: [ 26.273] no screens found ----------------------------- /var/log/Xorg.1.log ------------------------------------------------------- Warum bricht das ab? Was mache ich falsch? -- Mit freundlichen Grüßen Sebastian Reinhardt -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
Hat keiner eine Idee, woran das liegen könnte? Hat irgend wer hier ggf. so was schon mal gemacht? Am 22.06.2012 23:39, schrieb Sebastian Reinhardt:
Ich habe da noch ein Problem: Für die Kinder von Bekannten würde ich gern einen Rechner mit einem Mutliseat-Setup versehen, damit die sich nicht mehr beide streiten müssen. Da ich noch eine Tastatur und Maus, sowie einen Monitor da habe, der sonst weg fliegt wäre so ein Multiseat-Setup nat. ideal. Hier die Config: PC mit einer GraKa Nvidia GeForce 8400 GS AGP mit 1x DVI 1x VGA 1x SVHS/ TV-out OS: openSUSE 12.1 (x86_64) Kernel: 3.4.2-2-desktop NVidia-Treiber: 295.53
Ich habe als erstes mit "nvidia-settings" eine Dualmonitor- xorg.conf und zwei X-screens erzeugt. Also kein TwinView! Die beiden X-Screens haben auch funktioniert. Nachdem also beide X-Screens da waren, habe ich die xorg.conf nach folgenden Anleitungen angepasst: http://forums.opensuse.org/english/get-technical-help-here/hardware/463718-o...
https://wiki.archlinux.org/index.php/Xorg_multiseat Hier meine xorg.conf: -------------------------------------------------------------------------------------------------------------
Section "ServerFlags" Option "AllowMouseOpenFail" "on" Option "AutoAddDevices" "off" Option "ZapWarning" "on" Option "Xinerama" "0" EndSection
Section "ServerLayout" Identifier "seat0" Screen "Screen0" 0 0 InputDevice "keyboard0" "CoreKeyboard" InputDevice "mouse0" "CorePointer" Option "Xinerama" "0" EndSection
Section "ServerLayout" Identifier "seat1" Screen "Screen1" 0 0 InputDevice "keyboard1" "CoreKeyboard" InputDevice "mouse1" "CorePointer" Option "Xinerama" "0" EndSection
Section "Files" EndSection
Section "InputDevice" Identifier "mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mouse0" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection
Section "InputDevice" Identifier "mouse1" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mouse1" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection
Section "InputDevice" Identifier "keyboard0" Driver "evdev" Option "Protocol" "Standard" Option "XkbLayout" "de" Option "XkbRules" "xfree86" Option "Device" "/dev/input/by-id/usb-04f3_0103-event-kbd" EndSection
Section "InputDevice" Identifier "keyboard1" Driver "evdev" Option "Protocol" "Standard" Option "XkbLayout" "de" Option "XkbRules" "xfree86" Option "Device" "/dev/input/by-id/usb-046a_0011-event-kbd" EndSection
Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "IBM" HorizSync 31.5 - 93.8 VertRefresh 56.0 - 120.0 Option "DPMS" EndSection
Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Medion MD1772xe" HorizSync 30.0 - 70.0 VertRefresh 50.0 - 120.0 Option "DPMS" EndSection
Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8400 GS" BusID "PCI:1:0:0" Screen 0 Option "Enable" "true" EndSection
Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8400 GS" BusID "PCI:1:0:0" Screen 1 Option "Enable" "true" EndSection
Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: 1280x1024_85 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection
Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-1" Option "metamodes" "CRT-1: 1024x768 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection -------------------------------------------------------------------------------------------------------------
Nun wird der Screen0 erfolgreich geladen und in KDE eingeloggt. Nur der zweite X-Screen (Screen1) geht nicht (Auszug): ----------------------------- /var/log/Xorg.1.log ------------------------------------------------------- [ 26.272] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 26.273] (EE) Screen 0 deleted because of no matching config section. [ 26.273] (II) UnloadModule: "nvidia" [ 26.273] (II) Unloading nvidia [ 26.273] (II) UnloadModule: "wfb" [ 26.273] (II) Unloading wfb [ 26.273] (II) UnloadModule: "fb" [ 26.273] (II) Unloading fb [ 26.273] (EE) Device(s) detected, but none match those in the config file. [ 26.273] Fatal server error: [ 26.273] no screens found ----------------------------- /var/log/Xorg.1.log -------------------------------------------------------
Warum bricht das ab? Was mache ich falsch?
-- Mit freundlichen Grüßen Sebastian Reinhardt -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
participants (1)
-
Sebastian Reinhardt