Moin zusammen, ich kann mit meinem P4 keine Packages mehr installieren. die eingabe echo "arch_compat: i?86: 686" >> /mnt/usr/lib/rpm/rpmrc führt zum Fehler: Verzeichnis vorhanden. wie muss es richtig lauten ps: bitte an mailto:fvt.vtcc@t-online.de antworten danke Frank
muss natürlich richtig heissen: führt zum Fehler: Verzeichnis nicht vorhanden. -----Ursprüngliche Nachricht----- Von: Frank von Thienen [mailto:fvt.vtcc@t-online.de] Gesendet: Freitag, 14. September 2001 15:28 An: suse-linux@suse.com Betreff: Version 7.0 mit P4 RPM geht nicht mehr Moin zusammen, ich kann mit meinem P4 keine Packages mehr installieren. die eingabe echo "arch_compat: i?86: 686" >> /mnt/usr/lib/rpm/rpmrc führt zum Fehler: Verzeichnis vorhanden. wie muss es richtig lauten ps: bitte an mailto:fvt.vtcc@t-online.de antworten danke Frank -- Um die Liste abzubestellen, schicken Sie eine Mail an: suse-linux-unsubscribe@suse.com Um eine Liste aller verfügbaren Kommandos zu bekommen, schicken Sie eine Mail an: suse-linux-help@suse.com
Frank von Thienen wrote:
ich kann mit meinem P4 keine Packages mehr installieren. die eingabe echo "arch_compat: i?86: 686" >> /mnt/usr/lib/rpm/rpmrc ^^^^ führt zum Fehler: Verzeichnis NICHT vorhanden. ^^^^^Ich habs mal eingefuegt.
Ich glaube kaum, dass obiger Befehl stimmen kann. Mal davon abgesehen, dass ich RPM nicht so gut kenne (daher auch nicht weiss, ob das, was Du da vorhast, so funktioniert), glaube ich kaum, dass die rpmrc unter /mnt liegt. /mnt dient zum Ein- mounten von Dateisystemen, wird aber als Default normalerweise nicht benutzt. Vermutlich sollte es /usr/lib/rpm/rpmrc heissen, und auch dann wird es nur als root gehen. CU, Thomson -- Thomas Hertweck, Geophysicist Geophysical Institute, Karlsruhe University (TH) Hertzstr. 16, D-76187 Karlsruhe, Germany
Hallo Thomas, das verzeichnis habe ich jetzt mal bis ../rpm angelegt. dann wir bei diesem aufruf die datei rmprc angelegt. das problem ist , das ich mit meinem P4 keine Pakete mehr installieren kann. wenn es da einen anderen Trick gibt, ist mir das auch recht die eingabe stammt von der suse support site gruss frank -----Ursprüngliche Nachricht----- Von: thertw [mailto:thertw]Im Auftrag von Thomas Hertweck Gesendet: Freitag, 14. September 2001 15:39 An: Frank von Thienen Cc: SuSE Linux ML Betreff: Re: Version 7.0 mit P4 RPM geht nicht mehr Frank von Thienen wrote:
ich kann mit meinem P4 keine Packages mehr installieren. die eingabe echo "arch_compat: i?86: 686" >> /mnt/usr/lib/rpm/rpmrc ^^^^ führt zum Fehler: Verzeichnis NICHT vorhanden. ^^^^^Ich habs mal eingefuegt.
Ich glaube kaum, dass obiger Befehl stimmen kann. Mal davon abgesehen, dass ich RPM nicht so gut kenne (daher auch nicht weiss, ob das, was Du da vorhast, so funktioniert), glaube ich kaum, dass die rpmrc unter /mnt liegt. /mnt dient zum Ein- mounten von Dateisystemen, wird aber als Default normalerweise nicht benutzt. Vermutlich sollte es /usr/lib/rpm/rpmrc heissen, und auch dann wird es nur als root gehen. CU, Thomson -- Thomas Hertweck, Geophysicist Geophysical Institute, Karlsruhe University (TH) Hertzstr. 16, D-76187 Karlsruhe, Germany
Hallo Frank, es waere schoen, wenn Du lernst, in Emailantworten ordentlich zu quoten, das erleichtert das Lesen sehr... [Probleme mit der Installation von SuSE auf Pentium 4] Jetzt verstehe ich eigentlich erst, wo Dein Problem liegt. Ich dachte bisher, Du hast ein lauffaehiges SuSE Linux und es klappt nicht, weitere RPM Pakete einzuspielen. So wie ich das nun verstehe, klappt es schon gar nicht, die SuSE Distribution zu installieren.... Oder liege ich da wieder falsch? Wo ist denn nun genau Dein Problem? Ab welchem Zeitpunkt funktioniert denn die Installation nicht mehr? Frank von Thienen wrote:
das verzeichnis habe ich jetzt mal bis ../rpm angelegt. dann wir bei diesem aufruf die datei rmprc angelegt.
Also, das Anlegen der Datei wird da nicht helfen, sondern Du musst irgendwie eine vorhandene Datei ergaenzen. Leider weiss ich nicht, wo waehrend einer Installation die Datei rpmrc zu finden ist. Stammt die Info, die Du aus der SDB hast, vielleicht von http://sdb.suse.de/en/sdb/html/pentium4_70.html? Du hast wie dort beschrieben mit der Bootdisk gebootet und spaeter versucht, die Datei rpmrc anzupassen? Du hast es genau wie dort beschrieben gemacht? Hmm, ich glaube, da kann ich dann leider nicht weiter helfen, aber vielleicht weiss ja jemand anderes darueber Bescheid.... Gruesse, Thomson -- Thomas Hertweck, Geophysicist Geophysical Institute, University of Karlsruhe Hertzstr. 16, D-76187 Karlsruhe, Germany
Moin Thomas, ok, ich habe mich vielelicht nicht ordentlich ausgedrückt: 1. ich habe ein lauffähiges System unter einem PIII 500Mhz gehabt. 2. Ich habe das Motherboard ausgetauscht. 3. Jetzt kann ich keine Pakete mehr installieren, weil gemeckert wird, das die Pakete für eine andere Architektur gebaut wurden. (P4 1.5GHZ) 4. Darauf hin habe ich bei der SuseDB nachgeschaut und die liefert diesen String. Allerdings bei der Neuinstallation. Ich dachte das könnte mir auch helfen 5. Nur der geht bei mir nicht, weil das besagte Verzeichnis garnicht exsistiert. 6. Dann habe ich es angelegt, und das "Script" einmal ausgeführt. 7. Nix... geht nicht. 8. wenn ich das neue ALSA installieren will, oder jedes andere Paket, kommt die Meldung wie unter 3. Vielleicht hilft das, oder ich hole mir einfach das 7.2, denn da müssten die P4 ja unterstützt werden PS: was meinst du mit Quotenlernen... ist da irgend etwas was ich wissen müsste? Ausser vielleicht die Pfeile vor den Pfeilen der Pfeile????? ;-}} danke frank -----Ursprüngliche Nachricht----- Von: thertw@rz.uni-karlsruhe.de [mailto:thertw@rz.uni-karlsruhe.de]Im Auftrag von Thomas Hertweck Gesendet: Freitag, 14. September 2001 20:11 An: Frank von Thienen Cc: SuSE Linux Betreff: Re: Version 7.0 mit P4 RPM geht nicht mehr Hallo Frank, es waere schoen, wenn Du lernst, in Emailantworten ordentlich zu quoten, das erleichtert das Lesen sehr... [Probleme mit der Installation von SuSE auf Pentium 4] Jetzt verstehe ich eigentlich erst, wo Dein Problem liegt. Ich dachte bisher, Du hast ein lauffaehiges SuSE Linux und es klappt nicht, weitere RPM Pakete einzuspielen. So wie ich das nun verstehe, klappt es schon gar nicht, die SuSE Distribution zu installieren.... Oder liege ich da wieder falsch? Wo ist denn nun genau Dein Problem? Ab welchem Zeitpunkt funktioniert denn die Installation nicht mehr? Frank von Thienen wrote:
das verzeichnis habe ich jetzt mal bis ../rpm angelegt. dann wir bei diesem aufruf die datei rmprc angelegt.
Also, das Anlegen der Datei wird da nicht helfen, sondern Du musst irgendwie eine vorhandene Datei ergaenzen. Leider weiss ich nicht, wo waehrend einer Installation die Datei rpmrc zu finden ist. Stammt die Info, die Du aus der SDB hast, vielleicht von http://sdb.suse.de/en/sdb/html/pentium4_70.html? Du hast wie dort beschrieben mit der Bootdisk gebootet und spaeter versucht, die Datei rpmrc anzupassen? Du hast es genau wie dort beschrieben gemacht? Hmm, ich glaube, da kann ich dann leider nicht weiter helfen, aber vielleicht weiss ja jemand anderes darueber Bescheid.... Gruesse, Thomson -- Thomas Hertweck, Geophysicist Geophysical Institute, University of Karlsruhe Hertzstr. 16, D-76187 Karlsruhe, Germany -- Um die Liste abzubestellen, schicken Sie eine Mail an: suse-linux-unsubscribe@suse.com Um eine Liste aller verfügbaren Kommandos zu bekommen, schicken Sie eine Mail an: suse-linux-help@suse.com
On Fre, 14 Sep 2001, Frank von Thienen wrote:
ok, ich habe mich vielelicht nicht ordentlich ausgedrückt: 1. ich habe ein lauffähiges System unter einem PIII 500Mhz gehabt. 2. Ich habe das Motherboard ausgetauscht. 3. Jetzt kann ich keine Pakete mehr installieren, weil gemeckert wird, das die Pakete für eine andere Architektur gebaut wurden. (P4 1.5GHZ)
Warum hast du die Fehlermeldung nicht gleich gesagt???
4. Darauf hin habe ich bei der SuseDB nachgeschaut und die liefert diesen String. Allerdings bei der Neuinstallation. Ich dachte das könnte mir auch helfen 5. Nur der geht bei mir nicht, weil das besagte Verzeichnis garnicht exsistiert. 6. Dann habe ich es angelegt, und das "Script" einmal ausgeführt. 7. Nix... geht nicht.
Aehm, moment, du willst auf deinem _laufenden_ System rpms _nachinstallieren_? Dann musst du nicht /mnt/irgendwas und auch nicht /usr/lib/rpm/rpmrc anpassen sondern die /etc/rpmrc (bzw. diese erst anlegen): Fuer meinen Athlon hab ich auch ne Architektur definiert (da ich den Athlon-pgcc verwende mit -march=athlon -mcpu=atlon). Folgende Eintraege sind also noetig: echo "arch_compat: `uname -m`: i386" >> /etc/rpmrc echo "arch_compat: `uname -m`: i686" >> /etc/rpmrc Evtl. funktioniert das wie oben nicht, da ich nicht weiss als was sich ein iP4 meldet, aber ein anschliessendes: echo "arch_compat: i?86: i386" >> /etc/rpmrc Sollte dann helfen. Besser aber du schreibst erstmal, als was sich der P4 meldet und dann kann man die /etc/rpmrc besser anpassen.
PS: was meinst du mit Quotenlernen... ist da irgend etwas was ich wissen müsste? Ausser vielleicht die Pfeile vor den Pfeilen der Pfeile????? ;-}}
danke frank
-----Ursprüngliche Nachricht-----
Insbesonder das, was du hier vorexerziert hast: Viel zu lange Einleirung (die Zeile mit dem Von: reicht) und dann zitierst du die komplette Mail. Lies die Etikette der Liste (http://home.t-online.de/~f.walle/etikette.html) und http://learn.to/quote. [TOFU inkl. SuSE-Footer nach /dev/null entsorgt] -dnh -- Beware of bugs in the above code; I have only proved it correct, not tried it. - Donald Knuth
Hallo David, danke.... die Datei rmprc gehörte nach /etc damit gings Mit dem Quoten habe ich jetzt auch verstanden Thema durch Frank
participants (3)
-
David Haller
-
fvt.vtcc@t-online.de
-
Thomas Hertweck