Hallo, bei der Installation SuSE 9.0 habe ich die / Partition auf ein LVM device gelegt und mit reiserfs formatiert. /boot ist /hdb1 mit ext2. Alles anderen Partitionen sind auch LVM mit reiserfs. Yast hat das jedenfalls zugelassen und das System bootet auch. Was mich etwas beunruhigt sind jedoch die Meldungen beim Booten. notice>run boot scripts (setserial boot.proc) Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A Configured serial ports done<notice>exit status of (setserial boot.proc) is (0 0) <notice>run boot scripts (boot.evms) <notice>exit status of (boot.evms) is (0) <notice>run boot scripts (boot.md boot.device-mapper) Run file system check on root for device mapper setup fsck 1.34 (25-Jul-2003) Reiserfs super block in block 16 on 0x3a01 of format 3.6 with standard journal Blocks (total/free): 65536/15680 by 4096 bytes Filesystem is clean Filesystem seems mounted read-only. Skipping journal replay. Checking internal tree..finished doneRemounting root file system (/) read/write... Activating device mapper... Creating /dev/mapper/control character device with major:10 minor:63. Remounting root file system (/) read-only again... done <notice>exit status of (boot.md boot.device-mapper) is (0 0) <notice>run boot scripts (boot.lvm) Run file system check on root for LVM activation fsck 1.34 (25-Jul-2003) Reiserfs super block in block 16 on 0x3a01 of format 3.6 with standard journal Blocks (total/free): 65536/15680 by 4096 bytes Filesystem is clean Filesystem seems mounted read-only. Skipping journal replay. Checking internal tree..finished doneRemounting root file system (/) read/write for vgscan... Scanning for LVM volume groups... vgscan -- reading all physical volumes (this may take a while...) vgscan -- found active volume group "daolin" vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group mount: / is busy <- Hier wird versucht / wieder ro zu setzen, was aber misslingt. Activating LVM volume groups... vgchange -- volume group "daolin" already active done <notice>exit status of (boot.lvm) is (0) <notice>run boot scripts (boot.localfs) *** ERROR! Cannot fsck because root is not read-only! diese Meldung ist dann nur konsequent. Mounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) ..... Hat jemand eine Idee, woran das liegt? Kann ich die Meldung einfach ignorieren? Mfg Jörg