Hallo zusammen ... Versuche meine eingehenden Faxe per FAXRCVD/FAXDISPATCH per Mail an mich weiterzuleiten. Entweder bin ich zu doof oder ich hab irgendeine Einstellung nicht gemacht ... 8-) Folgendes zur Konfiguration: Benutze Hylafax 4.0pl2 MODEM ZYXEL U1496EG/V 6.21 M Prozesse: root@LINUX-SERVER:/ > ps ax | grep fax 1345 ? S 0:00 /usr/sbin/faxq 1348 ? S 0:00 /usr/lib/fax/hfaxd -i hylafax -o 4557 -s 444 1359 ? S 0:00 /usr/lib/fax/faxgetty /dev/ttyS0 Status: root@LINUX-SERVER:/ > faxstat -a HylaFAX scheduler on LINUX-SERVER.HWK-DO.DE: Running Modem ttyS0 (+49.231.5493195): Running and idle LOGDATEI ZU EMPFANGENEM FAX ********************************************************************************************** 08:58.37: [ 1359]: SESSION BEGIN 00000170 492315493195 Mar 02 11:08:58.37: [ 1359]: <-- [4:ATA\r] Mar 02 11:09:08.52: [ 1359]: --> [11:CONNECT FAX] Mar 02 11:09:08.53: [ 1359]: ANSWER: FAX CONNECTION Mar 02 11:09:08.53: [ 1359]: RECV FAX: begin Mar 02 11:09:08.53: [ 1359]: --> [4:+FCO] Mar 02 11:09:10.88: [ 1359]: --> [26:+FTI: 49 231 5493176 ] Mar 02 11:09:10.88: [ 1359]: REMOTE TSI "49 231 5493176" Mar 02 11:09:10.89: [ 1359]: --> [20:+FCS:0,3,0,2,0,0,0,5] Mar 02 11:09:10.89: [ 1359]: REMOTE wants 9600 bit/s Mar 02 11:09:10.89: [ 1359]: REMOTE wants page width 1728 pixels in 215 mm Mar 02 11:09:10.89: [ 1359]: REMOTE wants unlimited page length Mar 02 11:09:10.89: [ 1359]: REMOTE wants 3.85 line/mm Mar 02 11:09:10.89: [ 1359]: REMOTE wants 1-D MR Mar 02 11:09:10.89: [ 1359]: --> [2:OK] Mar 02 11:09:10.89: [ 1359]: <-- [7:AT+FDR\r] Mar 02 11:09:12.46: [ 1359]: --> [20:+FCS:0,3,0,2,0,0,0,5] Mar 02 11:09:12.46: [ 1359]: REMOTE wants 9600 bit/s Mar 02 11:09:12.47: [ 1359]: REMOTE wants page width 1728 pixels in 215 mm Mar 02 11:09:12.47: [ 1359]: REMOTE wants unlimited page length Mar 02 11:09:12.47: [ 1359]: REMOTE wants 3.85 line/mm Mar 02 11:09:12.47: [ 1359]: REMOTE wants 1-D MR Mar 02 11:09:13.16: [ 1359]: --> [7:CONNECT] Mar 02 11:09:13.16: [ 1359]: RECV: begin page Mar 02 11:09:13.17: [ 1359]: RECV: send trigger 022 Mar 02 11:09:13.17: [ 1359]: <-- data [1] Mar 02 11:09:47.95: [ 1359]: RECV: 32716 bytes of data, 999 total lines Mar 02 11:09:54.07: [ 1359]: RECV: 4824 bytes of data, 1207 total lines Mar 02 11:09:54.08: [ 1359]: --> [16:+FPS:1,4B2,0,0,0] Mar 02 11:09:55.41: [ 1359]: --> [6:+FET:2] Mar 02 11:09:55.41: [ 1359]: RECV recv EOP (no more pages or documents) Mar 02 11:09:55.42: [ 1359]: --> [2:OK] Mar 02 11:09:55.42: [ 1359]: RECV send MCF (message confirmation) Mar 02 11:09:55.42: [ 1359]: RECV FAX (00000170): from 49 231 5493176, page 1 in 0:45, INF, 3.85 line/mm, 1-D MR Mar 02 11:09:55.42: [ 1359]: RECV FAX (00000170): recvq/fax00039.tif from 49 231 5493176, route to <unspecified>, 1 pages in 0:47 Mar 02 11:09:55.43: [ 1359]: <-- [7:AT+FDR\r] Mar 02 11:09:58.21: [ 1359]: --> [7:+FHS:00] Mar 02 11:09:58.21: [ 1359]: REMOTE HANGUP: Normal and proper end of connection (code 0) Mar 02 11:09:58.22: [ 1359]: RECV FAX: bin/faxrcvd "recvq/fax00039.tif" "ttyS0" "00000170" "" Mar 02 11:09:59.59: [ 1359]: RECV FAX: end Mar 02 11:09:59.59: [ 1359]: SESSION END **************************************************************************************************************** Mein FaxDispatch in /var/spool/fax/etc: (Welche Attribute muss die Datei FaxDispatch eigentlich haben ??? --> bei mir 755) case "$SENDER" in *) SENDTO=Sebastian;; esac **************************************************************************************************************** Das Problem liegt offensichtlich in der LOGDATEI an jener Stelle(route to <unspecified>) Mar 02 11:09:55.42: [ 1359]: RECV FAX (00000170): recvq/fax00039.tif from 49 231 5493176, route to <unspecified>, 1 pages in 0:47 Wer kann helfen ??? Gruß Sebastian --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com