Hallo, egal ob ich meine Drucker in 9.2 über Yast oder über "http://localhost:631" einrichte, ich bekomme keine funktionierende Konstellation. Testausdruck an Paralleldrucker geht, Ausdruck z.B aus Konqueror bleibt nach Alert "Drucksystem wird initialisiert" stehen und bringt K. zum Absturz. Den J.Meixner-Artikel in der SDB habe ich gelesen und (hoffentlich richtig - bei 9.1 ging es) befolgt. Weiß da jemand was zu? Ansonsten muß ich downgraden. Bei Knoppix geht es tadellos. Ich vermute den Fehler in der named Konfiguration, die sich ja geändert hat. Gefühlsmäßig ist auch die Auflösung schlechter und langsamer geworden. Gruß P. Baumgartner
* Samstag, 13. November 2004 um 14:52 (+0100) schrieb Peter Baumgartner:
egal ob ich meine Drucker in 9.2 über Yast oder über "http://localhost:631" einrichte, ich bekomme keine funktionierende Konstellation. Testausdruck an Paralleldrucker geht, Ausdruck z.B aus Konqueror bleibt nach Alert "Drucksystem wird initialisiert" stehen und bringt K. zum Absturz. Den J.Meixner-Artikel in der SDB habe ich gelesen und (hoffentlich richtig - bei 9.1 ging es) befolgt. Weiß da jemand was zu?
Geht denn ein 'lpr <Irgendwas>' auf der Konsole?
Was wird während eines nicht funktionierenden Druckversuches nach
"/var/log/cups/error_log" geschrieben?
Gruß
Andreas
--
Andreas Könecke "Andreas Koenecke
Am Samstag, 13. November 2004 19:28 schrieb Andreas Koenecke:
* Samstag, 13. November 2004 um 14:52 (+0100) schrieb Peter Baumgartner:
egal ob ich meine Drucker in 9.2 über Yast oder über "http://localhost:631" einrichte, ich bekomme keine funktionierende Konstellation. Testausdruck an Paralleldrucker geht, Ausdruck z.B aus Konqueror bleibt nach Alert "Drucksystem wird initialisiert" stehen und bringt K. zum Absturz. Den J.Meixner-Artikel in der SDB habe ich gelesen und (hoffentlich richtig - bei 9.1 ging es) befolgt. Weiß da jemand was zu?
Geht denn ein 'lpr <Irgendwas>' auf der Konsole?
cyan:/home/peter # lpr -h lpr: error - scheduler not responding! cyan:/home/peter # lpr --help lpr: error - unknown option '-'! cyan:/home/peter # lpr -v /home/peter/Documents/hda lpr: warning - 'v' format modifier not supported - output may not be correct! lpr: error - scheduler not responding!
Was wird während eines nicht funktionierenden Druckversuches nach "/var/log/cups/error_log" geschrieben?
Das waren die letzten Meldungen: ---------------snip-------------------------------- [13/Nov/2004:14:42:03 +0100] Full reload complete. I [13/Nov/2004:14:42:03 +0100] Setting y2test device-uri to "parallel:/dev/lp0" (was "file:/dev/null".) I [13/Nov/2004:14:42:03 +0100] Setting y2test printer-is-accepting-jobs to 1 (was 0.) I [13/Nov/2004:14:42:03 +0100] Setting y2test printer-state to 3 (was 5.) I [13/Nov/2004:14:42:03 +0100] Saving printers.conf... I [13/Nov/2004:14:42:03 +0100] New printer 'y2test' added by 'root'. I [13/Nov/2004:14:42:04 +0100] Adding start banner page "none" to job 2. I [13/Nov/2004:14:42:04 +0100] Adding end banner page "none" to job 2. I [13/Nov/2004:14:42:04 +0100] Job 2 queued on 'y2test' by 'root'. I [13/Nov/2004:14:42:04 +0100] Started filter /usr/lib/cups/filter/pstops (PID 3984) for job 2. I [13/Nov/2004:14:42:04 +0100] Started filter /usr/lib/cups/filter/foomatic-rip (PID 3985) for job 2. I [13/Nov/2004:14:42:04 +0100] Started backend /usr/lib/cups/backend/parallel (PID 3986) for job 2. E [13/Nov/2004:14:42:26 +0100] PID 3986 stopped with status 0! I [13/Nov/2004:14:42:26 +0100] Hint: Try setting the LogLevel to "debug" to find out more. E [13/Nov/2004:14:42:28 +0100] PID 3985 stopped with status 9! I [13/Nov/2004:14:42:28 +0100] Hint: Try setting the LogLevel to "debug" to find out more. I [13/Nov/2004:14:42:28 +0100] Saving printers.conf... I [13/Nov/2004:14:42:30 +0100] Printer 'y2test' deleted by 'root'. I [13/Nov/2004:14:42:30 +0100] Saving printers.conf... I [13/Nov/2004:14:43:53 +0100] Scheduler shutting down normally. ----------------snap---------------- Mit http://localhost:631 kann ich den cupsd ansprechen, er schickt auch eine (unvollständige) Testseite an lpr, aber aus KDE friert er ein. xerox auf 192.168.x.x:9100 kann er nicht finden. ich habe jetzt mal /etc/cupsd.conf "zu Fuß" durcheditiert, da Yast wohl die mehrfach ändert und überschreibt, unter anderem mit "cupsd.conf.O". Nach rccupsd restart hat er bei einem Druckversuch auf "epson" an #parallel nach einer Denkpause von fast 5 Minuten angefangen, unzählige Leerseiten auszuspucken, ich habe erstmal abgebrochen. error.log sagt jetzt (debug) ungefähr 20 Seiten lang Das kürze ich jetzt weg, weil der hermes das sonst als "zu groß" zurückweist und schicke den Rest kommentarlos nach kannst Du damit etwas anfangen? Peter
* Sonntag, 14. November 2004 um 13:51 (+0100) schrieb Peter Baumgartner:
Am Samstag, 13. November 2004 19:28 schrieb Andreas Koenecke:
Geht denn ein 'lpr <Irgendwas>' auf der Konsole?
cyan:/home/peter # lpr -h lpr: error - scheduler not responding!
Der 'cupsd' läuft hier anscheinend nicht.
Was wird während eines nicht funktionierenden Druckversuches nach "/var/log/cups/error_log" geschrieben?
Das waren die letzten Meldungen: ---------------snip-------------------------------- [ ...] I [13/Nov/2004:14:42:04 +0100] Started backend /usr/lib/cups/backend/parallel (PID 3986) for job 2. E [13/Nov/2004:14:42:26 +0100] PID 3986 stopped with status 0! I [13/Nov/2004:14:42:26 +0100] Hint: Try setting the LogLevel to "debug" to find out more. E [13/Nov/2004:14:42:28 +0100] PID 3985 stopped with status 9! I [13/Nov/2004:14:42:28 +0100] Hint: Try setting the LogLevel to "debug" to find out more. I [13/Nov/2004:14:42:28 +0100] Saving printers.conf... I [13/Nov/2004:14:42:30 +0100] Printer 'y2test' deleted by 'root'. I [13/Nov/2004:14:42:30 +0100] Saving printers.conf... I [13/Nov/2004:14:43:53 +0100] Scheduler shutting down normally.
Wer oder was fährt hier den 'cupsd' runter?
xerox auf 192.168.x.x:9100 kann er nicht finden.
Wird auf diesem Printserver ein Protokoll "gefahren" oder druckt er nur über TCP-Socket?
kannst Du damit etwas anfangen?
Leider nicht, schicke mir doch mal die debug-error_log-Ausgabe per PM.
Gruß
Andreas
--
Andreas Könecke "Andreas Koenecke
Am Sonntag, 14. November 2004 15:19 schrieb Andreas Koenecke:
* Sonntag, 14. November 2004 um 13:51 (+0100) schrieb Peter Baumgartner:
Am Samstag, 13. November 2004 19:28 schrieb Andreas Koenecke:
Geht denn ein 'lpr <Irgendwas>' auf der Konsole?
cyan:/home/peter # lpr -h lpr: error - scheduler not responding!
Der 'cupsd' läuft hier anscheinend nicht.
rccups status gibt aber "running"
Was wird während eines nicht funktionierenden Druckversuches nach "/var/log/cups/error_log" geschrieben?
Das waren die letzten Meldungen: ---------------snip-------------------------------- [ ...] I [13/Nov/2004:14:42:04 +0100] Started backend /usr/lib/cups/backend/parallel (PID 3986) for job 2. E [13/Nov/2004:14:42:26 +0100] PID 3986 stopped with status 0! I [13/Nov/2004:14:42:26 +0100] Hint: Try setting the LogLevel to "debug" to find out more. E [13/Nov/2004:14:42:28 +0100] PID 3985 stopped with status 9! I [13/Nov/2004:14:42:28 +0100] Hint: Try setting the LogLevel to "debug" to find out more. I [13/Nov/2004:14:42:28 +0100] Saving printers.conf... I [13/Nov/2004:14:42:30 +0100] Printer 'y2test' deleted by 'root'. I [13/Nov/2004:14:42:30 +0100] Saving printers.conf... I [13/Nov/2004:14:43:53 +0100] Scheduler shutting down normally.
Wer oder was fährt hier den 'cupsd' runter?
Gute Frage!
xerox auf 192.168.x.x:9100 kann er nicht finden.
Wird auf diesem Printserver ein Protokoll "gefahren" oder druckt er nur über TCP-Socket?
Das ist ein Tektronix Phaser 550, der kann Postscript und ging unter 9.1 tadellos auf http....:9100
kannst Du damit etwas anfangen?
Leider nicht, schicke mir doch mal die debug-error_log-Ausgabe per PM.
Gruß
Andreas
mach ich, der hermes läßt es wegen der Größe (> 30 000 B) nicht durch.
--
Peter
* Sonntag, 14. November 2004 um 16:18 (+0100) schrieb Peter Baumgartner:
Am Sonntag, 14. November 2004 15:19 schrieb Andreas Koenecke:
* Sonntag, 14. November 2004 um 13:51 (+0100) schrieb Peter Baumgartner:
cyan:/home/peter # lpr -h lpr: error - scheduler not responding!
Der 'cupsd' läuft hier anscheinend nicht.
rccups status gibt aber "running"
Hm, seltsam... Ich kann obige Fehlermeldung "erzeugen", in dem ich den 'cupsd' herunterfahre.
xerox auf 192.168.x.x:9100 kann er nicht finden.
Wird auf diesem Printserver ein Protokoll "gefahren" oder druckt er nur über TCP-Socket?
Das ist ein Tektronix Phaser 550, der kann Postscript und ging unter 9.1 tadellos auf http....:9100
Bist du sicher, dass zu Begin der URI "http" und nicht "socket" stand? IPP auf
Port 9100 ist IMHO ungewöhnlich.
Gruß
Andreas
--
Andreas Könecke "Andreas Koenecke
Am Sonntag, 14. November 2004 18:25 schrieb Andreas Koenecke:
* Sonntag, 14. November 2004 um 16:18 (+0100) schrieb Peter Baumgartner:
Am Sonntag, 14. November 2004 15:19 schrieb Andreas Koenecke:
* Sonntag, 14. November 2004 um 13:51 (+0100) schrieb Peter Baumgartner:
cyan:/home/peter # lpr -h lpr: error - scheduler not responding!
Der 'cupsd' läuft hier anscheinend nicht.
rccups status gibt aber "running"
Hm, seltsam... Ich kann obige Fehlermeldung "erzeugen", in dem ich den 'cupsd' herunterfahre.
Und auf localhost:631 gibt er ja Antwort, also sollte er laufen. Mir scheint,
daß das Yast von der 9.2 <ironie>
xerox auf 192.168.x.x:9100 kann er nicht finden.
Wird auf diesem Printserver ein Protokoll "gefahren" oder druckt er nur über TCP-Socket?
Das ist ein Tektronix Phaser 550, der kann Postscript und ging unter 9.1 tadellos auf http....:9100
Bist du sicher, dass zu Begin der URI "http" und nicht "socket" stand? IPP auf Port 9100 ist IMHO ungewöhnlich.
Ich hatte beides, also sowohl Socket, als auch TCP schon unter 9.0 und 9.1 am Laufen. IPP sollte natürlich auf 631 kommen.
Gruß
Andreas
-- Andreas Könecke "Andreas Koenecke
" PGP-ID/Fingerprint: BD7C2E59/3E 11 E5 29 0C A8 2F 49 40 6C 2D 5F 12 9D E1 E3 PGP-Key on request or on public keyservers --
Am Samstag, 13. November 2004 19:28 schrieb Andreas Koenecke:
* Samstag, 13. November 2004 um 14:52 (+0100) schrieb Peter Baumgartner:
error.log sagt jetzt (debug) ungefähr 20 Seiten lang --------------error.log------------------ I [14/Nov/2004:11:48:50 +0100] Listening to 0:443 I [14/Nov/2004:11:48:50 +0100] Listening to 0:631 D [14/Nov/2004:11:48:50 +0100] AddLocation: added location 'CUPS_INTERNAL_BROWSE_ACL' D [14/Nov/2004:11:48:50 +0100] AllowHost: CUPS_INTERNAL_BROWSE_ACL allow @LOCAL D [14/Nov/2004:11:48:50 +0100] DenyIP: CUPS_INTERNAL_BROWSE_ACL deny 00000000/00000000 E [14/Nov/2004:11:48:50 +0100] httpGetHostByName("address") failed - Unbekannter Rechner! E [14/Nov/2004:11:48:50 +0100] Bad poll address address:port at line 610. E [14/Nov/2004:11:48:50 +0100] Unknown directive @LOCAL on line 747. D [14/Nov/2004:11:48:50 +0100] AddLocation: added location '/' D [14/Nov/2004:11:48:50 +0100] DenyIP: / deny 00000000/00000000 D [14/Nov/2004:11:48:50 +0100] AllowIP: / allow 7f000001/ffffffff D [14/Nov/2004:11:48:50 +0100] AllowIP: / allow 7f000002/ffffffff D [14/Nov/2004:11:48:50 +0100] AllowHost: / allow @LOCAL E [14/Nov/2004:11:48:50 +0100] Unknown directive AuthType on line 818. D [14/Nov/2004:11:48:50 +0100] AddLocation: added location '/admin' E [14/Nov/2004:11:48:50 +0100] Unknown Location directive # on line 835. D [14/Nov/2004:11:48:50 +0100] DenyIP: /admin deny 00000000/00000000 D [14/Nov/2004:11:48:50 +0100] AllowIP: /admin allow 7f000001/ffffffff D [14/Nov/2004:11:48:50 +0100] AllowHost: /admin allow @LOCAL I [14/Nov/2004:11:48:50 +0100] Loaded configuration file "/etc/cups/cupsd.conf" I [14/Nov/2004:11:48:50 +0100] Configured for up to 100 clients. I [14/Nov/2004:11:48:50 +0100] Allowing up to 100 client connections per host. I [14/Nov/2004:11:48:50 +0100] Full reload is required. D [14/Nov/2004:11:48:50 +0100] LoadAllPrinters: Loading printer epson... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "smb"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "http"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "ipp"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "lpd"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "novell"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "parallel:/dev/lp0"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "pipe"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "scsi"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS0?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS1?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS2?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS3?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS4?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS5?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS6?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS7?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS8?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS9?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS10?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS11?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS12?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS13?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS14?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS15?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS16?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS17?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS18?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS19?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS20?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS21?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS22?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "serial:/dev/ttyS23?baud=115200"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "socket"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp0"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp1"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp2"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp3"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp4"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp5"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp6"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp7"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp8"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp9"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp10"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp11"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp12"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp13"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp14"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "usb:/dev/usblp15"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "canon:/dev/lp0"... D [14/Nov/2004:11:48:50 +0100] LoadDevices: Added device "epson:/dev/lp0"... I [14/Nov/2004:11:48:50 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 3763 PPDs... I [14/Nov/2004:11:48:51 +0100] LoadPPDs: No new or changed PPDs... D [14/Nov/2004:11:48:51 +0100] LoadAllJobs: Scanning /var/spool/cups... D [14/Nov/2004:11:48:51 +0100] LoadAllJobs: Loading attributes for job 1... I [14/Nov/2004:11:48:51 +0100] Full reload complete. D [14/Nov/2004:11:48:51 +0100] StartListening: NumListeners=2 D [14/Nov/2004:11:48:51 +0100] StartListening: address=00000000 port=443 D [14/Nov/2004:11:48:51 +0100] StartListening: address=00000000 port=631 D [14/Nov/2004:11:48:51 +0100] ResumeListening: setting input bits... D [14/Nov/2004:11:49:00 +0100] AcceptClient: 8 from localhost:631. D [14/Nov/2004:11:49:00 +0100] CloseClient: 8 D [14/Nov/2004:11:49:00 +0100] AcceptClient: 8 from localhost:631. D [14/Nov/2004:11:49:00 +0100] ReadClient: 8 POST /printers/ HTTP/1.1 D [14/Nov/2004:11:49:00 +0100] ProcessIPPRequest: 8 status_code=1 D [14/Nov/2004:11:49:00 +0100] CloseClient: 8 D [14/Nov/2004:11:49:00 +0100] AcceptClient: 8 from localhost:631. D [14/Nov/2004:11:49:00 +0100] ReadClient: 8 POST /printers/ HTTP/1.1 D [14/Nov/2004:11:49:00 +0100] ProcessIPPRequest: 8 status_code=1 D [14/Nov/2004:11:49:00 +0100] CloseClient: 8 D [14/Nov/2004:11:49:00 +0100] AcceptClient: 8 from localhost:631. D [14/Nov/2004:11:49:00 +0100] ReadClient: 8 POST /classes/ HTTP/1.1 D [14/Nov/2004:11:49:00 +0100] ProcessIPPRequest: 8 status_code=1 D [14/Nov/2004:11:49:00 +0100] CloseClient: 8 D [14/Nov/2004:11:49:00 +0100] AcceptClient: 8 from localhost:631. D [14/Nov/2004:11:49:00 +0100] ReadClient: 8 POST /printers/ HTTP/1.1 D [14/Nov/2004:11:49:00 +0100] ProcessIPPRequest: 8 status_code=1 D [14/Nov/2004:11:49:00 +0100] CloseClient: 8 D [14/Nov/2004:11:49:00 +0100] AcceptClient: 8 from localhost:631. D [14/Nov/2004:11:49:00 +0100] ReadClient: 8 POST /printers/ HTTP/1.1 D [14/Nov/2004:11:49:00 +0100] ProcessIPPRequest: 8 status_code=1 D [14/Nov/2004:11:49:00 +0100] CloseClient: 8 D [14/Nov/2004:11:49:02 +0100] AcceptClient: 8 from localhost:631. D [14/Nov/2004:11:49:02 +0100] ReadClient: 8 POST / HTTP/1.1 D [14/Nov/2004:11:49:02 +0100] ProcessIPPRequest: 8 status_code=0 D [14/Nov/2004:11:52:11 +0100] AcceptClient: 10 from cyan.bssmusic.org:631. D [14/Nov/2004:11:52:11 +0100] ReadClient: 10 GET /printers/epson.ppd HTTP/1.1 D [14/Nov/2004:11:52:11 +0100] SendFile: 10 file=11 D [14/Nov/2004:11:52:11 +0100] CloseClient: 10 D [14/Nov/2004:11:52:12 +0100] AcceptClient: 10 from localhost:631. D [14/Nov/2004:11:52:12 +0100] ReadClient: 10 POST /printers/epson HTTP/1.1 D [14/Nov/2004:11:52:12 +0100] print_job: auto-typing file... D [14/Nov/2004:11:52:12 +0100] print_job: request file type is application/postscript. D [14/Nov/2004:11:52:12 +0100] check_quotas: requesting-user-name = 'root' D [14/Nov/2004:11:52:12 +0100] print_job: requesting-user-name = 'root' D [14/Nov/2004:11:52:12 +0100] Adding default job-sheets values "none,none"... I [14/Nov/2004:11:52:12 +0100] Adding start banner page "none" to job 2. I [14/Nov/2004:11:52:12 +0100] Adding end banner page "none" to job 2. I [14/Nov/2004:11:52:12 +0100] Job 2 queued on 'epson' by 'root'. D [14/Nov/2004:11:52:12 +0100] Job 2 hold_until = 0 D [14/Nov/2004:11:52:12 +0100] StartJob(2, 0x809ae00) D [14/Nov/2004:11:52:12 +0100] StartJob() id = 2, file = 0/1 D [14/Nov/2004:11:52:12 +0100] job-sheets=none,none D [14/Nov/2004:11:52:12 +0100] banner_page = 0 D [14/Nov/2004:11:52:12 +0100] StartJob: argv = "epson","2","root","cupsd.conf","1","multiple-document-handling=separate-documents-collated-copies orientation-requested=3","/var/spool/cups/d00002-001" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[1]="SOFTWARE=CUPS/1.1" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[2]="USER=root" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[3]="CHARSET=utf-8" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[4]="LANG=de" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[5]="PPD=/etc/cups/ppd/epson.ppd" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[6]="CUPS_SERVERROOT=/etc/cups" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[7]="RIP_MAX_CACHE=8m" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[8]="TMPDIR=/var/spool/cups/tmp" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[9]="CONTENT_TYPE=application/postscript" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[10]="DEVICE_URI=parallel:/dev/lp0" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[11]="PRINTER=epson" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[12]="CUPS_DATADIR=/usr/share/cups" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[14]="CUPS_SERVER=localhost" D [14/Nov/2004:11:52:12 +0100] StartJob: envp[15]="IPP_PORT=443" D [14/Nov/2004:11:52:12 +0100] StartJob: statusfds = [ 11 12 ] D [14/Nov/2004:11:52:12 +0100] StartJob: filterfds[1] = [ 13 -1 ] D [14/Nov/2004:11:52:12 +0100] StartJob: filter = "/usr/lib/cups/filter/pstops" D [14/Nov/2004:11:52:12 +0100] StartJob: filterfds[0] = [ 14 15 ] D [14/Nov/2004:11:52:12 +0100] start_process("/usr/lib/cups/filter/pstops", 0xbffedd80, 0xbffed0f0, 13, 15, 12) I [14/Nov/2004:11:52:12 +0100] Started filter /usr/lib/cups/filter/pstops (PID 10923) for job 2. D [14/Nov/2004:11:52:12 +0100] StartJob: filter = "/usr/lib/cups/filter/foomatic-rip" D [14/Nov/2004:11:52:12 +0100] StartJob: filterfds[1] = [ 13 16 ] D [14/Nov/2004:11:52:12 +0100] start_process("/usr/lib/cups/filter/foomatic-rip", 0xbffedd80, 0xbffed0f0, 14, 16, 12) I [14/Nov/2004:11:52:12 +0100] Started filter /usr/lib/cups/filter/foomatic-rip (PID 10924) for job 2. D [14/Nov/2004:11:52:12 +0100] StartJob: backend = "/usr/lib/cups/backend/parallel" D [14/Nov/2004:11:52:12 +0100] StartJob: filterfds[0] = [ -1 14 ] D [14/Nov/2004:11:52:12 +0100] start_process("/usr/lib/cups/backend/parallel", 0xbffedd80, 0xbffed0f0, 13, 14, 12) I [14/Nov/2004:11:52:12 +0100] Started backend /usr/lib/cups/backend/parallel (PID 10925) for job 2. D [14/Nov/2004:11:52:12 +0100] ProcessIPPRequest: 10 status_code=0 D [14/Nov/2004:11:52:12 +0100] CloseClient: 10 D [14/Nov/2004:11:52:12 +0100] [Job 2] Page = 595x842; 9,40 to 586,833 D [14/Nov/2004:11:52:12 +0100] [Job 2] slowcollate=0, slowduplex=0, sloworder=0 D [14/Nov/2004:11:52:12 +0100] [Job 2] 0 %%BoundingBox: 0 0 595 842 D [14/Nov/2004:11:52:12 +0100] [Job 2] 0 %%Creator: Qt 3.3.3 D [14/Nov/2004:11:52:12 +0100] [Job 2] 0 %%Title: cupsd.conf D [14/Nov/2004:11:52:12 +0100] [Job 2] 0 %%CreationDate: So Nov 14 11:52:11 2004 D [14/Nov/2004:11:52:12 +0100] [Job 2] 0 %%Orientation: Portrait D [14/Nov/2004:11:52:12 +0100] [Job 2] 0 %%Pages: 15 D [14/Nov/2004:11:52:12 +0100] [Job 2] 0 %%DocumentFonts: SUSESans-Roman Courier D [14/Nov/2004:11:52:12 +0100] [Job 2] 0 %%EndComments D [14/Nov/2004:11:52:12 +0100] [Job 2] 0 %%BeginProlog D [14/Nov/2004:11:52:12 +0100] [Job 2] 0 %%EndProlog D [14/Nov/2004:11:52:12 +0100] [Job 2] 0 %%BeginSetup D [14/Nov/2004:11:52:13 +0100] [Job 2] foomatic-rip version $Revision: 3.48 $ running... D [14/Nov/2004:11:52:13 +0100] [Job 2] Parsing PPD file ... D [14/Nov/2004:11:52:13 +0100] [Job 2] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip" D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option ColorSpace D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option PageSize D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option PageRegion D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option Model D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option PrintoutMode D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option ImageableArea D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option PaperDimension D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option MediaType D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option InkType D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option stpGamma D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option Density D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option stpBrightness D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option stpSaturation D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option Contrast D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option Cyan D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option Magenta D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option Yellow D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option GSResolution D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option Quality D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option OutputType D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option ImageType D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option Dither D [14/Nov/2004:11:52:13 +0100] [Job 2] Added option Font D [14/Nov/2004:11:52:13 +0100] [Job 2] D [14/Nov/2004:11:52:13 +0100] [Job 2] Parameter Summary D [14/Nov/2004:11:52:13 +0100] [Job 2] ----------------- D [14/Nov/2004:11:52:13 +0100] [Job 2] D [14/Nov/2004:11:52:13 +0100] [Job 2] Spooler: cups D [14/Nov/2004:11:52:13 +0100] [Job 2] Printer: epson D [14/Nov/2004:11:52:13 +0100] [Job 2] PPD file: /etc/cups/ppd/epson.ppd D [14/Nov/2004:11:52:13 +0100] [Job 2] Printer model: Epson Stylus Color Foomatic/gimp-print (recommended) D [14/Nov/2004:11:52:13 +0100] [Job 2] Job title: cupsd.conf D [14/Nov/2004:11:52:13 +0100] [Job 2] File(s) to be printed: D [14/Nov/2004:11:52:13 +0100] [Job 2] <STDIN> D [14/Nov/2004:11:52:13 +0100] [Job 2] D [14/Nov/2004:11:52:13 +0100] [Job 2] Pondering option 'multiple-document-handling=separate-documents-collated-copies' D [14/Nov/2004:11:52:13 +0100] [Job 2] Unknown option multiple-document-handling=separate-documents-collated-copies. D [14/Nov/2004:11:52:13 +0100] [Job 2] Pondering option 'orientation-requested=3' D [14/Nov/2004:11:52:13 +0100] [Job 2] Unknown option orientation-requested=3. D [14/Nov/2004:11:52:13 +0100] [Job 2] D [14/Nov/2004:11:52:13 +0100] [Job 2] ================================================ D [14/Nov/2004:11:52:13 +0100] [Job 2] D [14/Nov/2004:11:52:13 +0100] [Job 2] File: <STDIN> D [14/Nov/2004:11:52:13 +0100] [Job 2] D [14/Nov/2004:11:52:13 +0100] [Job 2] ================================================ ende-1.-haelfte--- kannst Du damit etwas anfangen? Peter
* Samstag, 13. November 2004 um 14:52 (+0100) schrieb Peter Baumgartner: ----------part2--------- D [14/Nov/2004:11:52:13 +0100] [Job 2] D [14/Nov/2004:11:52:13 +0100] [Job 2] Reading PostScript input ... D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%CreationDate: Tue Sep 17 16:16:38 1991 D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%VMusage: 57844 76768 D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %% Copyright International Business Machines,Corp. 1991 D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %% IBM Courier is a Trademark of the IBM Corporation. D [14/Nov/2004:11:52:13 +0100] [Job 2] --> This document is DSC-conforming! D [14/Nov/2004:11:52:13 +0100] [Job 2] D [14/Nov/2004:11:52:13 +0100] [Job 2] ----------- D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginProlog D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%EndProlog D [14/Nov/2004:11:52:13 +0100] [Job 2] D [14/Nov/2004:11:52:13 +0100] [Job 2] ----------- D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginSetup D [14/Nov/2004:11:52:13 +0100] [Job 2] Inserting PostScript code for CUPS'
Am Samstag, 13. November 2004 19:28 schrieb Andreas Koenecke: page accounting D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *PrintoutMode High D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: PrintoutMode=High --> Setting option D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %% FoomaticRIPOptionSetting: PrintoutMode=High D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: PrintoutMode=High --> Setting option D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *Contrast 0.00 D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: Contrast=0.00 --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *Cyan 0.00 D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: Cyan=0.00 --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *Density 0.10 D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: Density=0.10 --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *Magenta 0.00 D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: Magenta=0.00 --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *stpBrightness 0.00 D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: stpBrightness=0.00 --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *stpGamma 1.00 D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: stpGamma=1.00 --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *stpSaturation 0.0 D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: stpSaturation=0.0 --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *Yellow 0.00 D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: Yellow=0.00 --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *InkType CMYK D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: InkType=CMYK --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *MediaType Coated D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: MediaType=Coated --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *PageSize A4 D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: PageSize=A4 --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *Dither FromPrintoutMode D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: Dither=FromPrintoutMode --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %% FoomaticRIPOptionSetting: Dither=@PrintoutMode D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: Dither=FromPrintoutMode --> Looking up setting in composite option 'PrintoutMode' D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *GSResolution FromPrintoutMode D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: GSResolution=FromPrintoutMode --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %% FoomaticRIPOptionSetting: GSResolution=@PrintoutMode D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: GSResolution=FromPrintoutMode --> Looking up setting in composite option 'PrintoutMode' D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *ImageType FromPrintoutMode D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: ImageType=FromPrintoutMode --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %% FoomaticRIPOptionSetting: ImageType=@PrintoutMode D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: ImageType=FromPrintoutMode --> Looking up setting in composite option 'PrintoutMode' D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *OutputType FromPrintoutMode D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: OutputType=FromPrintoutMode --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %% FoomaticRIPOptionSetting: OutputType=@PrintoutMode D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: OutputType=FromPrintoutMode --> Looking up setting in composite option 'PrintoutMode' D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginFeature: *Quality FromPrintoutMode D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: Quality=FromPrintoutMode --> Option will be set by PostScript interpreter D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode D [14/Nov/2004:11:52:13 +0100] [Job 2] Option: Quality=FromPrintoutMode --> Looking up setting in composite option 'PrintoutMode' D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %% Font Page 00 D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%BeginFont: Courier D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%FontName: Courier-Uni D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%Creator: Composite font created by Qt D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%EndFont D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%BeginFont: SUSE Sans D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%Copyright: Modified by SUSE, based on Bitstream Vera fonts.?Copyright (c) 2003 by Bitstream, Inc. All Rights Reserved. D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%Creator: Converted from TrueType by Qt D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %% Font Page 00 D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%BeginFont: SUSESans-Roman D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%FontName: SUSESans-Roman-Uni D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%Creator: Composite font created by Qt D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%EndFont D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%EndFont D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%EndSetup D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%Page: 1 1 D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%Page: 1 1 D [14/Nov/2004:11:52:13 +0100] [Job 2] pw = 577.0, pl = 793.0 D [14/Nov/2004:11:52:13 +0100] [Job 2] PageLeft = 9.0, PageRight = 586.0 D [14/Nov/2004:11:52:13 +0100] [Job 2] PageTop = 833.0, PageBottom = 40.0 D [14/Nov/2004:11:52:13 +0100] [Job 2] PageWidth = 595.0, PageLength = 842.0 D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%BeginPageSetup D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%EndPageSetup D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%Page: 2 2 D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%EndSetup D [14/Nov/2004:11:52:13 +0100] [Job 2] D [14/Nov/2004:11:52:13 +0100] [Job 2] ----------- D [14/Nov/2004:11:52:13 +0100] [Job 2] New page: 1 1 D [14/Nov/2004:11:52:13 +0100] [Job 2] Inserting option code into "PageSetup" section. D [14/Nov/2004:11:52:13 +0100] [Job 2] D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%BeginPageSetup D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: %%EndPageSetup D [14/Nov/2004:11:52:13 +0100] [Job 2] End of page header D [14/Nov/2004:11:52:13 +0100] [Job 2] pw = 577.0, pl = 793.0 D [14/Nov/2004:11:52:13 +0100] [Job 2] PageLeft = 9.0, PageRight = 586.0 D [14/Nov/2004:11:52:13 +0100] [Job 2] PageTop = 833.0, PageBottom = 40.0 D [14/Nov/2004:11:52:13 +0100] [Job 2] PageWidth = 595.0, PageLength = 842.0 D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%BeginPageSetup D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%EndPageSetup D [14/Nov/2004:11:52:13 +0100] [Job 2] 0 %%Page: 3 3 D [14/Nov/2004:11:52:13 +0100] [Job 2] New page found but previous not printed, print it now. D [14/Nov/2004:11:52:13 +0100] [Job 2] Found: D [14/Nov/2004:11:52:13 +0100] [Job 2] %%Page: 2 2 D [14/Nov/2004:11:52:13 +0100] [Job 2] --> Output goes directly to the renderer now. D [14/Nov/2004:11:52:13 +0100] [Job 2] D [14/Nov/2004:11:52:13 +0100] [Job 2] D [14/Nov/2004:11:52:13 +0100] [Job 2] Starting renderer D [14/Nov/2004:11:52:13 +0100] [Job 2] renderer PID kid4=10928 D [14/Nov/2004:11:52:13 +0100] [Job 2] renderer command: gs -q -dPARANOIDSAFER -dNOPAUSE -dBATCH -sDEVICE=stp -sModel=escp2 -sOutputFile=- - D [14/Nov/2004:11:52:13 +0100] [Job 2] JCL: <job data> D [14/Nov/2004:11:52:13 +0100] [Job 2] D [14/Nov/2004:11:52:13 +0100] [Job 2] foomatic-gswrapper: gs '-dPARANOIDSAFER' '-dNOPAUSE' '-dBATCH' '-sDEVICE=stp' '-sModel=escp2' '-sOutputFile=/dev/fd/3' '/dev/fd/0' 3>&1 1>&2 D [14/Nov/2004:11:52:13 +0100] [Job 2] ESP Ghostscript 7.07 (2003-07-12) D [14/Nov/2004:11:52:13 +0100] [Job 2] Copyright 2003 artofcode LLC and Easy Software Products, all rights reserved. D [14/Nov/2004:11:52:13 +0100] [Job 2] This software comes with NO WARRANTY: see the file COPYING for details. D [14/Nov/2004:11:52:14 +0100] [Job 2] D [14/Nov/2004:11:52:14 +0100] [Job 2] ----------- D [14/Nov/2004:11:52:14 +0100] [Job 2] New page: 2 2 D [14/Nov/2004:11:52:14 +0100] [Job 2] Inserting option code into "PageSetup" section. D [14/Nov/2004:11:52:14 +0100] [Job 2] Found: D [14/Nov/2004:11:52:14 +0100] [Job 2] %%Page: 2 2 D [14/Nov/2004:11:52:14 +0100] [Job 2] [{ D [14/Nov/2004:11:52:14 +0100] [Job 2] %%BeginFeature: *GSResolution 720x720DPI D [14/Nov/2004:11:52:14 +0100] [Job 2] <>setpagedevice D [14/Nov/2004:11:52:14 +0100] [Job 2] %%EndFeature D [14/Nov/2004:11:52:14 +0100] [Job 2] } stopped cleartomark D [14/Nov/2004:11:52:14 +0100] [Job 2] [{ D [14/Nov/2004:11:52:14 +0100] [Job 2] %%BeginFeature: *Quality 720mwuni D [14/Nov/2004:11:52:14 +0100] [Job 2] <>setpagedevice D [14/Nov/2004:11:52:14 +0100] [Job 2] %%EndFeature D [14/Nov/2004:11:52:14 +0100] [Job 2] } stopped cleartomark D [14/Nov/2004:11:52:14 +0100] [Job 2] [{ D [14/Nov/2004:11:52:14 +0100] [Job 2] %%BeginFeature: *OutputType Color D [14/Nov/2004:11:52:14 +0100] [Job 2] <>setpagedevice D [14/Nov/2004:11:52:14 +0100] [Job 2] %%EndFeature D [14/Nov/2004:11:52:14 +0100] [Job 2] } stopped cleartomark D [14/Nov/2004:11:52:14 +0100] [Job 2] [{ D [14/Nov/2004:11:52:14 +0100] [Job 2] %%BeginFeature: *ImageType Photographs D [14/Nov/2004:11:52:14 +0100] [Job 2] <>setpagedevice D [14/Nov/2004:11:52:14 +0100] [Job 2] %%EndFeature D [14/Nov/2004:11:52:14 +0100] [Job 2] } stopped cleartomark D [14/Nov/2004:11:52:14 +0100] [Job 2] [{ D [14/Nov/2004:11:52:14 +0100] [Job 2] %%BeginFeature: *Dither Adaptive D [14/Nov/2004:11:52:14 +0100] [Job 2] <>setpagedevice D [14/Nov/2004:11:52:14 +0100] [Job 2] %%EndFeature D [14/Nov/2004:11:52:14 +0100] [Job 2] } stopped cleartomark D [14/Nov/2004:11:52:14 +0100] [Job 2] --> Output goes to the FIFO buffer now. D [14/Nov/2004:11:52:14 +0100] [Job 2] D [14/Nov/2004:11:52:14 +0100] [Job 2] D [14/Nov/2004:11:52:14 +0100] [Job 2] Found: %%BeginPageSetup D [14/Nov/2004:11:52:14 +0100] [Job 2] Found: %%EndPageSetup D [14/Nov/2004:11:52:14 +0100] [Job 2] End of page header D [14/Nov/2004:11:52:14 +0100] [Job 2] pw = 577.0, pl = 793.0 D [14/Nov/2004:11:52:14 +0100] [Job 2] PageLeft = 9.0, PageRight = 586.0 D [14/Nov/2004:11:52:14 +0100] [Job 2] PageTop = 833.0, PageBottom = 40.0 D [14/Nov/2004:11:52:14 +0100] [Job 2] PageWidth = 595.0, PageLength = 842.0 D [14/Nov/2004:11:52:14 +0100] [Job 2] 0 %%BeginPageSetup D [14/Nov/2004:11:52:14 +0100] [Job 2] 0 %%EndPageSetup D [14/Nov/2004:11:52:14 +0100] [Job 2] New page found but previous not printed, print it now. D [14/Nov/2004:11:52:14 +0100] [Job 2] Found: D [14/Nov/2004:11:52:14 +0100] [Job 2] %%Page: 3 3 D [14/Nov/2004:11:52:14 +0100] [Job 2] --> Output goes directly to the renderer now. D [14/Nov/2004:11:52:14 +0100] [Job 2] D [14/Nov/2004:11:52:38 +0100] [Job 2] D [14/Nov/2004:11:52:38 +0100] [Job 2] ----------- D [14/Nov/2004:11:52:38 +0100] [Job 2] New page: 3 3 D [14/Nov/2004:11:52:38 +0100] [Job 2] Inserting option code into "PageSetup" section. D [14/Nov/2004:11:52:38 +0100] [Job 2] Found: D [14/Nov/2004:11:52:38 +0100] [Job 2] %%Page: 3 3 D [14/Nov/2004:11:52:38 +0100] [Job 2] [{ D [14/Nov/2004:11:52:38 +0100] [Job 2] %%BeginFeature: *GSResolution 720x720DPI D [14/Nov/2004:11:52:38 +0100] [Job 2] <>setpagedevice D [14/Nov/2004:11:52:38 +0100] [Job 2] %%EndFeature D [14/Nov/2004:11:52:38 +0100] [Job 2] } stopped cleartomark D [14/Nov/2004:11:52:38 +0100] [Job 2] [{ D [14/Nov/2004:11:52:38 +0100] [Job 2] %%BeginFeature: *Quality 720mwuni D [14/Nov/2004:11:52:38 +0100] [Job 2] <>setpagedevice D [14/Nov/2004:11:52:38 +0100] [Job 2] %%EndFeature D [14/Nov/2004:11:52:38 +0100] [Job 2] } stopped cleartomark D [14/Nov/2004:11:52:38 +0100] [Job 2] [{ D [14/Nov/2004:11:52:38 +0100] [Job 2] %%BeginFeature: *OutputType Color D [14/Nov/2004:11:52:38 +0100] [Job 2] <>setpagedevice D [14/Nov/2004:11:52:38 +0100] [Job 2] %%EndFeature D [14/Nov/2004:11:52:38 +0100] [Job 2] } stopped cleartomark D [14/Nov/2004:11:52:38 +0100] [Job 2] [{ D [14/Nov/2004:11:52:38 +0100] [Job 2] %%BeginFeature: *ImageType Photographs D [14/Nov/2004:11:52:38 +0100] [Job 2] <>setpagedevice D [14/Nov/2004:11:52:38 +0100] [Job 2] %%EndFeature D [14/Nov/2004:11:52:38 +0100] [Job 2] } stopped cleartomark D [14/Nov/2004:11:52:38 +0100] [Job 2] [{ D [14/Nov/2004:11:52:38 +0100] [Job 2] %%BeginFeature: *Dither Adaptive D [14/Nov/2004:11:52:38 +0100] [Job 2] <>setpagedevice D [14/Nov/2004:11:52:38 +0100] [Job 2] %%EndFeature D [14/Nov/2004:11:52:38 +0100] [Job 2] } stopped cleartomark D [14/Nov/2004:11:52:38 +0100] [Job 2] --> Output goes to the FIFO buffer now. D [14/Nov/2004:11:52:38 +0100] [Job 2] .... ..... ..... ..... D [14/Nov/2004:11:54:34 +0100] [Job 2] D [14/Nov/2004:11:54:34 +0100] [Job 2] ----------- D [14/Nov/2004:11:54:34 +0100] [Job 2] New page: 15 15 D [14/Nov/2004:11:54:34 +0100] [Job 2] Inserting option code into "PageSetup" section. D [14/Nov/2004:11:54:34 +0100] [Job 2] Found: D [14/Nov/2004:11:54:34 +0100] [Job 2] %%Page: 15 15 D [14/Nov/2004:11:54:34 +0100] [Job 2] [{ D [14/Nov/2004:11:54:34 +0100] [Job 2] %%BeginFeature: *GSResolution 720x720DPI D [14/Nov/2004:11:54:34 +0100] [Job 2] <>setpagedevice D [14/Nov/2004:11:54:34 +0100] [Job 2] %%EndFeature D [14/Nov/2004:11:54:34 +0100] [Job 2] } stopped cleartomark D [14/Nov/2004:11:54:34 +0100] [Job 2] [{ D [14/Nov/2004:11:54:34 +0100] [Job 2] %%BeginFeature: *Quality 720mwuni D [14/Nov/2004:11:54:34 +0100] [Job 2] <>setpagedevice D [14/Nov/2004:11:54:34 +0100] [Job 2] %%EndFeature D [14/Nov/2004:11:54:34 +0100] [Job 2] } stopped cleartomark D [14/Nov/2004:11:54:34 +0100] [Job 2] [{ D [14/Nov/2004:11:54:34 +0100] [Job 2] %%BeginFeature: *OutputType Color D [14/Nov/2004:11:54:34 +0100] [Job 2] <>setpagedevice D [14/Nov/2004:11:54:34 +0100] [Job 2] %%EndFeature D [14/Nov/2004:11:54:34 +0100] [Job 2] } stopped cleartomark D [14/Nov/2004:11:54:34 +0100] [Job 2] [{ D [14/Nov/2004:11:54:34 +0100] [Job 2] %%BeginFeature: *ImageType Photographs D [14/Nov/2004:11:54:34 +0100] [Job 2] <>setpagedevice D [14/Nov/2004:11:54:34 +0100] [Job 2] %%EndFeature D [14/Nov/2004:11:54:34 +0100] [Job 2] } stopped cleartomark D [14/Nov/2004:11:54:34 +0100] [Job 2] [{ D [14/Nov/2004:11:54:34 +0100] [Job 2] %%BeginFeature: *Dither Adaptive D [14/Nov/2004:11:54:34 +0100] [Job 2] <>setpagedevice D [14/Nov/2004:11:54:34 +0100] [Job 2] %%EndFeature D [14/Nov/2004:11:54:34 +0100] [Job 2] } stopped cleartomark D [14/Nov/2004:11:54:34 +0100] [Job 2] --> Output goes to the FIFO buffer now. D [14/Nov/2004:11:54:34 +0100] [Job 2] D [14/Nov/2004:11:54:34 +0100] [Job 2] D [14/Nov/2004:11:54:34 +0100] [Job 2] Found: %%BeginPageSetup D [14/Nov/2004:11:54:34 +0100] [Job 2] Found: %%EndPageSetup D [14/Nov/2004:11:54:34 +0100] [Job 2] End of page header D [14/Nov/2004:11:54:34 +0100] [Job 2] Flushing FIFO. D [14/Nov/2004:11:54:34 +0100] [Job 2] D [14/Nov/2004:11:54:34 +0100] [Job 2] Closing renderer D [14/Nov/2004:11:54:53 +0100] [Job 2] tail process done writing data to STDOUT D [14/Nov/2004:11:54:53 +0100] [Job 2] KID4 finished D [14/Nov/2004:11:54:53 +0100] [Job 2] KID4 exited with status 0 D [14/Nov/2004:11:54:53 +0100] [Job 2] KID3 exited with status 0 D [14/Nov/2004:11:54:53 +0100] [Job 2] Renderer exit stat: 0 D [14/Nov/2004:11:54:53 +0100] [Job 2] KID3 finished D [14/Nov/2004:11:54:53 +0100] [Job 2] Renderer process finished D [14/Nov/2004:11:54:53 +0100] [Job 2] D [14/Nov/2004:11:54:53 +0100] [Job 2] Closing foomatic-rip. D [14/Nov/2004:11:54:53 +0100] UpdateJob: job 2, file 0 is complete. D [14/Nov/2004:11:54:53 +0100] CancelJob: id = 2 D [14/Nov/2004:11:54:53 +0100] StopJob: id = 2, force = 0 D [14/Nov/2004:11:54:53 +0100] StopJob: printer state is 3 D [14/Nov/2004:11:55:25 +0100] AcceptClient: 10 from cyan.bssmusic.org:631. D [14/Nov/2004:11:55:25 +0100] ReadClient: 10 POST /printers/ HTTP/1.1 D [14/Nov/2004:11:55:25 +0100] ProcessIPPRequest: 10 status_code=1 D [14/Nov/2004:11:55:25 +0100] CloseClient: 10 ----------end.error.log----------------- kannst Du damit etwas anfangen? Peter
* Sonntag, 14. November 2004 um 15:34 (+0100) schrieb Peter Baumgartner:
[ "/var/log/cups/error_log" ] ----------part2--------- [ ... ] ----------end.error.log-----------------
kannst Du damit etwas anfangen?
Nein, es tut mir leid, aber ich kann keinen Fehler erkennen. Das ist wohl zu
kompliziert für mich...
Gruß
Andreas
--
Andreas Könecke "Andreas Koenecke
Am Sonntag, 14. November 2004 18:21 schrieb Andreas Koenecke:
* Sonntag, 14. November 2004 um 15:34 (+0100) schrieb Peter Baumgartner:
[ "/var/log/cups/error_log" ] ----------part2--------- [ ... ] ----------end.error.log-----------------
kannst Du damit etwas anfangen?
Nein, es tut mir leid, aber ich kann keinen Fehler erkennen. Das ist wohl zu kompliziert für mich...
Tja, für mich auch, ich muß dann wohl wieder etwas mehr in /etc wühlen und Sarge draufhauen. Peter
participants (2)
-
Andreas Koenecke
-
Peter Baumgartner