Problem: FireWire-Installation (Adaptec, AFW-4300A)
![](https://seccdn.libravatar.org/avatar/3c325ab0ff9996112ea897f725b0c5aa.jpg?s=120&d=mm&r=g)
Hallo ihr alle,
ich habe Adaptec (AFW-4300A) FireWire-Karte gekauft, laut:
http://www.linux1394.org/view_device.php?id=476
funktioniert die Karte einwandfrei, bei mir aber leider nicht.
Was ich schon gemacht habe:
lspci:
00:0a.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8024
_____
Ich habe neuen Kernel (2.4.23-pre4) mit folgenden Optionen kompiliert:
#######
<M> IEEE 1394 (FireWire) support (EXPERIMENTAL)
--- Device Drivers
<M> Texas Instruments PCILynx support
<M> OHCI-1394 support
--- Protocol Drivers
<M> OHCI-1394 Video support
<M> SBP-2 support (Harddisks etc.)
[*] Enable Phys DMA support for SBP2 (Debug)
<M> Ethernet over 1394
<M> OHCI-DV I/O support
<M> Raw IEEE1394 I/O support
<M> IEC61883-1 Plug support
<M> IEC61883-6 (Audio transmission) support
[*] Excessive debugging output
[*] OUI Database built-in
Dann habe ich module geladen:
modprobe ohci1394
modprobe raw1394
#######
lsmod:
raw1394 23020 0 (unused)
ohci1394 28160 0 (unused)
ieee1394 185824 0 [raw1394 ohci1394]
#######
dmesg:
ohci1394: $Rev: 1010 $ Ben Collins
![](https://seccdn.libravatar.org/avatar/3c325ab0ff9996112ea897f725b0c5aa.jpg?s=120&d=mm&r=g)
Hi Linuxer, leider habe ich noch keine Lösung gefunden aber ich füge noch eine Ausgabe von cat /proc/bus/ieee1394/devices unten hinzu. Vielleicht fällt jemandem irgendwas ein... Roman Langolf schrieb:
Hallo ihr alle,
ich habe Adaptec (AFW-4300A) FireWire-Karte gekauft, laut: http://www.linux1394.org/view_device.php?id=476
funktioniert die Karte einwandfrei, bei mir aber leider nicht.
Was ich schon gemacht habe:
lspci: 00:0a.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8024 _____
Ich habe neuen Kernel (2.4.23-pre4) mit folgenden Optionen kompiliert:
####### <M> IEEE 1394 (FireWire) support (EXPERIMENTAL) --- Device Drivers <M> Texas Instruments PCILynx support <M> OHCI-1394 support --- Protocol Drivers <M> OHCI-1394 Video support <M> SBP-2 support (Harddisks etc.) [*] Enable Phys DMA support for SBP2 (Debug) <M> Ethernet over 1394 <M> OHCI-DV I/O support <M> Raw IEEE1394 I/O support <M> IEC61883-1 Plug support <M> IEC61883-6 (Audio transmission) support [*] Excessive debugging output [*] OUI Database built-in
Dann habe ich module geladen: modprobe ohci1394 modprobe raw1394
####### lsmod: raw1394 23020 0 (unused) ohci1394 28160 0 (unused) ieee1394 185824 0 [raw1394 ohci1394]
####### dmesg:
ohci1394: $Rev: 1010 $ Ben Collins
ohci1394_0: Remapped memory spaces reg 0xd0a72000 ohci1394_0: Soft reset finished ohci1394_0: Iso contexts reg: 000000a8 implemented: 0000000f ohci1394_0: 4 iso receive contexts available ohci1394_0: Iso contexts reg: 00000098 implemented: 000000ff ohci1394_0: 8 iso transmit contexts available ohci1394_0: GUID: 00309500:a0020ffd ohci1394_0: Receive DMA ctx=0 initialized ohci1394_0: Receive DMA ctx=0 initialized ohci1394_0: Transmit DMA ctx=0 initialized ohci1394_0: Transmit DMA ctx=1 initialized ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[ee004000-ee0047ff] Max Packet=[2048] ohci1394_0: request csr_rom address: c367b000 ohci1394_0: IntEvent: 00020010 ohci1394_0: irq_handler: Bus reset requested ohci1394_0: Cancel request received ohci1394_0: Got RQPkt interrupt status=0x00008409 ohci1394_0: Single packet rcv'd ohci1394_0: Got phy packet ctx=0 ... discarded ohci1394_0: IntEvent: 00010000 ohci1394_0: SelfID interrupt received (phyid 0, root) ohci1394_0: SelfID packet 0x807f8c56 received ieee1394: Including SelfID 0x568c7f80 ohci1394_0: SelfID for this node is 0x807f8c56 ohci1394_0: SelfID complete ohci1394_0: PhyReqFilter=ffffffffffffffff ieee1394: selfid_complete called with successful SelfID stage ... irm_id: 0xFFC0 node_id: 0xFFC0 ieee1394: NodeMgr: Processing host reset for knodemgrd_0 ieee1394: Initiating ConfigROM request for node 0-00:1023 ieee1394: send packet local: ffc00140 ffc0ffff f0000400 [......] ieee1394: NodeMgr: raw=0xe000a002 irmc=1 cmc=1 isc=1 bmc=0 pmc=0 cyc_clk_acc=0 max_rec=204 8 gen=0 lspd=2 [......] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00309500a0020ffd]
ieee1394: send packet 100: ffff0100 ffc0ffff f0000234 1f0000c0 ohci1394_0: Inserting packet for node 0-63:1023, tlabel=0, tcode=0x0, speed=0 ohci1394_0: Starting transmit DMA ctx=0 ohci1394_0: IntEvent: 00000001 ohci1394_0: Got reqTxComplete interrupt status=0x00008011 ohci1394_0: Packet sent to node 63 tcode=0x0 tLabel=0x00 ack=0x11 spd=0 data=0x1F0000C0 ct x=0 raw1394: /dev/raw1394 device initialized
####### testlibraw meint: couldn't get handle: No such device This probably means that you don't have raw1394 support in the kernel or that you haven't loaded the raw1394 module.
Zur Not habe ich noch pcilynx probiert hochzuladen:
####### $: modprobe pcilynx
/lib/modules/2.4.23-pre4/kernel/drivers/ieee1394/pcilynx.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.23-pre4/kernel/drivers/ieee1394/pcilynx.o: insmod /lib/modules/2.4.23-pre4/kernel/drivers/ieee1394/pcilynx.o failed /lib/modules/2.4.23-pre4/kernel/drivers/ieee1394/pcilynx.o: insmod pcilynx failed
#### ls -ahl /dev/video1394 crw-rw-rw- 1 root root 172, 0 Sep 15 18:48 /dev/video1394 ls -ahl /dev/raw1394 crw-rw-rw- 1 root root 172, 0 Sep 15 18:49 /dev/raw1394
######### cat /proc/bus/ieee1394/devices Node[0-00:1023] GUID[00309500a0020ffd]: Vendor ID: `Linux OHCI-1394' [0x080028] Capabilities: 0x0083c0 Bus Options: IRMC(1) CMC(1) ISC(1) BMC(0) PMC(0) GEN(0) LSPD(2) MAX_REC(2048) CYC_CLK_ACC(0) Host Node Status: Host Driver : ohci1394 Nodes connected : 1 Nodes active : 1 SelfIDs received: 1 Irm ID : [0-00:1023] BusMgr ID : [0-63:1023] In Bus Reset : no Root : yes Cycle Master : yes IRM : yes Bus Manager : no Ich verstehe nicht wo das Problem ist, wieso findet testlibraw die Karte nicht? Dank&Gruß! Roman
![](https://seccdn.libravatar.org/avatar/3c325ab0ff9996112ea897f725b0c5aa.jpg?s=120&d=mm&r=g)
Hallo ihr alle, Roman Langolf schrieb:
[... Ausgabe von dmesg, lspci, etc. ...]
#### ls -ahl /dev/video1394 crw-rw-rw- 1 root root 172, 0 Sep 15 18:48 /dev/video1394 ls -ahl /dev/raw1394 crw-rw-rw- 1 root root 172, 0 Sep 15 18:49 /dev/raw1394
Ich verstehe nicht wo das Problem ist, wieso findet er die Karte nicht?
Da ich keine Antwort auf mein Problem bekommen habe frage ich's mal anders, hat denn jemand solche Karte überhaupt? Und funktioniert sie bei euch? Gruß, Roman -- http://www.jesus.de http://www.thehope.de http://www.ec-thueringen.de
participants (1)
-
Roman Langolf