Hallo alle zusammen, ich habe hier eine Anfrage für einen Freund. Er hat einen Interconnekt-Anschluß von der Telekom. Er hat einen CISCO Router 2620 Die Telekom auf der Gegenseite einen CISCO 2610. Er möchte nun ein Fehlerprotokolauslesen/werten, aber es gehen Ihm einige Pakete verloren. Bei der Telekom gehen aber alle Pakete durch. Sorry, das ich wenige Info's habe, vielleicht weiß ja einer ein paar Tip's. Ich selber habe noch nie einen Ciso Router gesehen. Was kann ich das machen, um festzustellen wo die Pakete verloren gehen. Kann ich das vielleicht von meiner Linux Maschine aus machen? Thx for any help... Ciao Andre
Am Donnerstag 20 September 2001 09:51 schrieben Sie:
Er hat einen Interconnekt-Anschluß von der Telekom. Er hat einen CISCO Router 2620 Die Telekom auf der Gegenseite einen CISCO 2610.
Er möchte nun ein Fehlerprotokolauslesen/werten, aber es gehen Ihm einige Pakete verloren.
Hm, ich denke Ciscos dürften hier etwas off-topic sein. Cisco-Konfigurationen ab der 26er bis zur 70er Reihe sollten _nur_ von Leuten vorgenommen werden, die so einigermassen wissen, was diese Dinger leisten können, also sich zumindest mit dem IOS auskennen. Es gibt allerdings auch mehrere Arten, Daten auf Linux-Maschinen zu bekommen, das "billigste" ist, das Messaging per localx-facility per syslog abzufangen. Das kann auch mit Debug-Daten geschehen. Obacht, der Transfer läuft per udp. "Hardcore"-Variante ist die Verwendung von NetFlow, da gibt es auch etwas für Linux. Hier wird so ziemlich _alles_ protokolliert, man braucht aber auch einen schneller Rechner mit grosser HD, der die Messages abfängt. Zu diesem Thema also besser erstmal die Cisco-Doku mit dem RTFM-Hinweis durchackern... ;-) Gruss -- Andre Ruppert technische Leitung <ar@vision-net.de> ================================= Vision Consulting Deutschland oHG Osterather Str.7 50739 Köln tel +49 221 917 15 33 fax +49 221 917 15 38 email info@vision-net.de www.vision-net.de =================================
Moin Andre, Andre Ruppert wrote:
Hm, ich denke Ciscos dürften hier etwas off-topic sein. Cisco-Konfigurationen ab der 26er bis zur 70er Reihe sollten _nur_ von Leuten vorgenommen werden, die so einigermassen wissen, > was diese Dinger leisten können, also sich zumindest mit dem IOS > auskennen.
Mein Kollege wollte nur gucken wo, der Traffic hängenbleibt. Ist recht lustig mit anzusehen, wie er sich mit der Telekom zangt;)
Zu diesem Thema also besser erstmal die Cisco-Doku mit dem RTFM-Hinweis durchackern... ;-)
Das habe ich ich Ihm auch gesagt... Trotzdem besten Dank. Ciao Andre
Am Donnerstag 20 September 2001 15:13 schrieb Andre Heine:
Mein Kollege wollte nur gucken wo, der Traffic hängenbleibt. Ist recht lustig mit anzusehen, wie er sich mit der Telekom zangt;)
Da fällt mir doch noch eine "kleine" Hilfe ein: Trafficmessung auf beiden Seiten der eigenen Cisco via SNMP mit mrtg (www.mrtg.org) und einem kleinen Perl-tool ("calc.pl" und "calc-reverse.pl"); such mal bei google. Darüberhinaus könnte er auch mit dem Paket ip-acct arbeiten, um wenigstens zu sehen, wieviel Traffic er selbst produziert, und das dann mit der Abrechnung vergleichen... Gruss -- Andre Ruppert technische Leitung <ar@vision-net.de> ================================= Vision Consulting Deutschland oHG Osterather Str.7 50739 Köln tel +49 221 917 15 33 fax +49 221 917 15 38 email info@vision-net.de www.vision-net.de =================================
participants (2)
-
Andre Heine
-
Andre Ruppert