Hallo, leider kann ich mit Hylafax (4.1beta2-135 vom Suseserver) keine Faxe empfangen (zu viele Errors). --------------------------- schnipp ---------------------------------------- Aug 02 20:22:34.23: [ 255]: ANSWER: FAX CONNECTION Aug 02 20:22:34.23: [ 255]: MODEM input buffering enabled Aug 02 20:22:34.23: [ 255]: RECV FAX: begin Aug 02 20:22:35.88: [ 255]: --> [32:+FTSI: " TELDA.NET"] Aug 02 20:22:35.88: [ 255]: REMOTE TSI "TELDA.NET" Aug 02 20:22:36.15: [ 255]: --> [21:+FDCS:0,5,0,2,0,0,0,0] Aug 02 20:22:36.15: [ 255]: REMOTE wants 14400 bit/s Aug 02 20:22:36.15: [ 255]: REMOTE wants page width 1728 pixels in 215 mm Aug 02 20:22:36.15: [ 255]: REMOTE wants unlimited page length Aug 02 20:22:36.15: [ 255]: REMOTE wants 3.85 line/mm Aug 02 20:22:36.15: [ 255]: REMOTE wants 1-D MR Aug 02 20:22:41.14: [ 255]: --> [14:SENDING FTT...] Aug 02 20:22:44.19: [ 255]: --> [32:+FTSI: " TELDA.NET"] Aug 02 20:22:44.19: [ 255]: REMOTE TSI "TELDA.NET" Aug 02 20:22:44.46: [ 255]: --> [21:+FDCS:0,5,0,2,0,0,0,0] Aug 02 20:22:44.46: [ 255]: REMOTE wants 14400 bit/s Aug 02 20:22:44.46: [ 255]: REMOTE wants page width 1728 pixels in 215 mm Aug 02 20:22:44.46: [ 255]: REMOTE wants unlimited page length Aug 02 20:22:44.46: [ 255]: REMOTE wants 3.85 line/mm Aug 02 20:22:44.46: [ 255]: REMOTE wants 1-D MR Aug 02 20:22:49.45: [ 255]: --> [14:SENDING FTT...] Aug 02 20:22:52.51: [ 255]: --> [32:+FTSI: " TELDA.NET"] Aug 02 20:22:52.51: [ 255]: REMOTE TSI "TELDA.NET" Aug 02 20:22:52.78: [ 255]: --> [21:+FDCS:0,4,0,2,0,0,0,0] Aug 02 20:22:52.78: [ 255]: REMOTE wants 12000 bit/s Aug 02 20:22:52.78: [ 255]: REMOTE wants page width 1728 pixels in 215 mm Aug 02 20:22:52.78: [ 255]: REMOTE wants unlimited page length Aug 02 20:22:52.78: [ 255]: REMOTE wants 3.85 line/mm Aug 02 20:22:52.78: [ 255]: REMOTE wants 1-D MR Aug 02 20:22:56.35: [ 255]: --> [2:OK] Aug 02 20:22:56.35: [ 255]: <-- [7:AT+FDR\r] Aug 02 20:22:56.47: [ 255]: --> [5:+FCFR] Aug 02 20:22:57.73: [ 255]: --> [7:CONNECT] Aug 02 20:22:57.73: [ 255]: RECV: begin page Aug 02 20:22:57.73: [ 255]: MODEM set XON/XOFF/FLUSH: input ignored, output generated Aug 02 20:22:57.73: [ 255]: RECV: send trigger 021 Aug 02 20:23:05.82: [ 255]: RECV: 134 total lines, 133 bad lines, 133 consecutive bad lines Aug 02 20:23:05.82: [ 255]: MODEM set XON/XOFF/DRAIN: input interpreted, output disabled Aug 02 20:23:05.82: [ 255]: --> [8:+FPTS:1 ] Aug 02 20:23:06.98: [ 255]: --> [7:+FET:2 ] Aug 02 20:23:06.98: [ 255]: RECV recv EOP (no more pages or documents) Aug 02 20:23:06.98: [ 255]: --> [2:OK] Aug 02 20:23:06.98: [ 255]: RECV: REJECT page quality, 0% good lines (95% required) Aug 02 20:23:06.98: [ 255]: RECV send RTN (retrain negative) Aug 02 20:23:06.99: [ 255]: <-- [10:AT+FPTS=2\r] Aug 02 20:23:07.11: [ 255]: --> [2:OK] Aug 02 20:23:07.11: [ 255]: <-- [7:AT+FDR\r] Aug 02 20:23:10.87: [ 255]: --> [8:+FHNG:0 ] Aug 02 20:23:10.87: [ 255]: REMOTE HANGUP: Normal and proper end of connection (code 0) Aug 02 20:23:10.91: [ 255]: RECV FAX (00000011): recvq/fax00003.tif from TELDA.NET, route to <unspecified>, 0 pages in +0:36 Aug 02 20:23:10.92: [ 255]: RECV FAX: Normal and proper end of connection Aug 02 20:23:10.93: [ 255]: RECV FAX (00000011): session with TELDA.NET terminated abnormally: Normal and proper end of +connection Aug 02 20:23:10.94: [ 255]: RECV FAX: bin/faxrcvd "recvq/fax00003.tif" "modem" "00000011" "Normal and proper end of +connection" --- 2/2 [20:23] The HylaFAX Recei facsimile not received ---------------------- schnapp ------------------------------------------------- Da ja faxen mit ISDN noch nicht geht, habe ich mir ein altes Modem (Fax Master II 14400) fuer 10 DM gekauft. Da ich kein Handbuch dafuer habe, habe ich die Konfiguration aus der config/class2 Datei ubernommen. Vielleicht kennt ja jemand das Modem und kann mir ein paar Tips geben. thx Bruno --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
participants (1)
-
brunos＠sonnet.com