Moin Moin! Jetzt hab' ich gedacht, ich komme jetzt mal alleine weiter, aber es ist dann doch wieder anders, als ich gedacht habe. VBox startet jetzt zwar, aber die log-Datei sieht nicht wirklich gut aus und es werden zwar nachrichten aufgenommen, aber wenn ich die mit # cat /var/spool/vbox/Thilo/incoming/00000980706556-00000861 > /dev/audio mir die Datei anhören will, kommt nur rauschen. Und am Telefon höre ich die standard.msg auch nicht. Meine Soundkarte kann aber z.B. mp3's ohne Probleme abspielen - also an der liegt's meiner Meinung nach nicht. Ich versuche jetzt mal die VBox-log-Datei sinvoll zu quoten: [bis hier kommen keine Fehlermeldungen. Der Anruf wird erkannt, die Nummer nicht, der die Section Unknown wird verwendet...] 28-Jan 19:29:16 <D> Waiting for "VCON|CONNECT"... Got "VCON" (1). 28-Jan 19:29:16 <I> Running tcl script "/var/spool/vbox/Thilo/standard.tcl"... 28-Jan 19:29:16 <I> Playing "/var/spool/vbox/Thilo/messages/standard.msg"... 28-Jan 19:29:16 <E> Can't read vbox audio header from message. 28-Jan 19:29:16 <D> [vbox_put_message] result "ERROR". 28-Jan 19:29:16 <J> [vbox_pause] waiting 500 ms... 28-Jan 19:29:16 <I> Playing "/var/spool/vbox/Thilo/messages/beep.msg"... 28-Jan 19:29:16 <E> Can't read vbox audio header from message. 28-Jan 19:29:16 <D> [vbox_put_message] result "ERROR". 28-Jan 19:29:16 <J> [vbox_pause] waiting 500 ms... 28-Jan 19:29:17 <I> Recording "/var/spool/vbox/Thilo/incoming/00000980706556-00000861" (90 secs)... 28-Jan 19:29:17 <D> Setting voice compression "ADPCM-4"... 28-Jan 19:29:17 <D> Flushing modem... 28-Jan 19:29:17 <D> Sending "AT+VSM=4+VLS=2"... 28-Jan 19:29:17 <J> Reading modem echo (4 secs timeout)... 28-Jan 19:29:17 <J> Reading modem input (4 secs timeout)... 28-Jan 19:29:17 <D> Waiting for "OK|VCON"... Got "OK" (1). 28-Jan 19:29:17 <D> Flushing modem... 28-Jan 19:29:17 <D> Sending "AT+VRX"... 28-Jan 19:29:17 <J> Reading modem echo (4 secs timeout)... 28-Jan 19:29:17 <J> Reading modem input (4 secs timeout)... 28-Jan 19:29:17 <D> Waiting for "CONNECT"... Got it. 28-Jan 19:29:17 <J> Record: <DATA 256 incoming; 256 outgoing> [schnipp] 28-Jan 19:29:28 <J> *** NO CARRIER *** 28-Jan 19:29:28 <D> Found sequence "<DLE><ETX>" (remote hangup)... 28-Jan 19:29:28 <J> Record: <DATA 98 incoming; 96 outgoing> 28-Jan 19:29:28 <D> Setting "/var/spool/vbox/Thilo/incoming/00000980706556-00000861" to 501.100 (0600)... 28-Jan 19:29:28 <J> Reading modem input (4 secs timeout)... 28-Jan 19:29:28 <D> Waiting for "NO CARRIER"... Got it. 28-Jan 19:29:28 <D> [vbox_get_message] result "HANGUP". 28-Jan 19:29:28 <J> [vbox_pause] waiting 1000 ms... 28-Jan 19:29:30 <E> In "/var/spool/vbox/Thilo/standard.tcl": (line 40). 28-Jan 19:29:30 <D> Freeing tcl interpreter... 28-Jan 19:29:30 <E> General tcl problem - setting flag to quit program... 28-Jan 19:29:30 <D> Hangup modem (drop dtr 400 ms)... 28-Jan 19:29:30 <D> Flushing modem (timeout)... 28-Jan 19:29:30 <D> Blocking all signals (0-64)... 28-Jan 19:29:30 <I> Exit program on signal 15... 28-Jan 19:29:30 <D> Hangup modem (drop dtr 400 ms)... 28-Jan 19:29:30 <D> Flushing modem (timeout)... 28-Jan 19:29:31 <D> Closing modem port (4)... 28-Jan 19:29:31 <D> Unlocking vboxgetty (/var/run/vboxgetty-ttyI6.pid)... 28-Jan 19:29:31 <W> Can't remove lock "/var/run/vboxgetty-ttyI6.pid". Ich hätte den Ausschnitt ja gerne kürzer gehalten, aber ich wollte ja nix wichtiges wegschnippen. Was kann ich denn jetzt noch probieren? Gruß & Danke Thilo
Thilo A. Coblenzer schrieb am 29.01.2001:
28-Jan 19:29:16 <I> Playing "/var/spool/vbox/Thilo/messages/standard.msg"... 28-Jan 19:29:16 <E> Can't read vbox audio header from message. 28-Jan 19:29:16 <D> [vbox_put_message] result "ERROR".
Ich habe mich noch nicht näher mit vbox beschäftigt, aber bei Dir liegt anscheinend ein Problem mit der standard.msg vor. Hast Du die Datei ins richtige Format konvertiert? hth, Christian -- Made with a Macintosh... ChriSchmi@t-online.de http://home.t-online.de/home/chrischmi/
On Mon, Jan 29, 2001 at 07:24:38AM +0100, Thilo A. Coblenzer wrote: Hallo Thilo, [...]
aufgenommen, aber wenn ich die mit # cat /var/spool/vbox/Thilo/incoming/00000980706556-00000861 > /dev/audio mir die Datei anhören will, kommt nur rauschen.
Es ist auch nicht der ideale Weg, sich seine Anrufe so anzuhören. Warum nimmst Du nicht ein KDE-Programm dafür, oder 'vboxplay'? Also: 'vboxplay /var/spool/vbox/Thilo/incoming/00000980706556-00000861' Aber es gibt auch schöne Programme, die das für Dich machen.
Und am Telefon höre ich die standard.msg auch nicht.
Kein Wunder. Du hast ja auch genug Fehlermeldungen in Deiner Logdatei. [...]
28-Jan 19:29:16 <I> Playing "/var/spool/vbox/Thilo/messages/standard.msg"... 28-Jan 19:29:16 <E> Can't read vbox audio header from message.
Die ist nicht in dem Zustand wie sie sein soll. Im Verzeichnis /usr/doc/packages/i4l/vbox/examples (SuSE 6.3) findest Du diese Dateien bis auf 'standard.msg. Die ist bei mir auch leer. Aber Du willst ja eh' Deine eigene Ansage. Ruf Dich selbst an, kopier diese Datei ins 'messages'-Verzeichnis und benenne sie in 'standard.msg' um. Jede Menge Hilfe findest Du in /usr/doc/packages/i4l/vbox/doc/de.
28-Jan 19:29:16 <I> Playing "/var/spool/vbox/Thilo/messages/beep.msg"... 28-Jan 19:29:16 <E> Can't read vbox audio header from message. 28-Jan 19:29:16 <D> [vbox_put_message] result "ERROR".
Dasselbe wie oben.
28-Jan 19:29:30 <E> In "/var/spool/vbox/Thilo/standard.tcl": (line 40). 28-Jan 19:29:30 <D> Freeing tcl interpreter... 28-Jan 19:29:30 <E> General tcl problem - setting flag to quit program...
Da hast Du ein weiteres Problem. Was hast Du in der Datei verändert? Vielleicht hilft eine Neuinstallation von vbox? Gruß Karlheinz -- E-Mail: karlheinz.guenster@t-online.de --
participants (3)
-
Christian Schmidt
-
Karlheinz Günster
-
Thilo A. Coblenzer