.Hallo zusammen. Wo kann ich denn meinen bootvorgang auf Unstimmigkeiten hin vergleichen. Ich bin nicht so bewandert um Fehler beim booten zu sehen oder zu erkennen, wo und wie ich einen Fehler ausmerze. Ein 'exits with status 0' sollte doch bestimmt nicht dabei sein ?!?!? Ich habe (probeweise) die ganze boot.msg mal angehangen. Hier sind doch bestimmt viele mit einem geschulten Auge dabei. Welche Fehler muß ich denn unbedingt beheben? Ich habe mir gestern SuSE 9.0 bestellt. Wenn ich ein update damit fahre, bleiben die falsch konfigurierten Sachen vermutlich immer noch falsch - nur in neuer Version falsch? Wenn es eine Möglichkeit für mich selber zum Abgleichen gibt, die ich nicht fand, bitte einfach nur Bescheid geben. Ich wurschtel mich dann selber durch. Danke, Kai. ----------------------------------------------------------- /var/log/boot.msg Inspecting /boot/System.map-2.4.20-4GB-athlon Loaded 20849 symbols from /boot/System.map-2.4.20-4GB-athlon. Symbols match kernel version 2.4.20. Loaded 139 symbols from 5 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.20-4GB-athlon (root@Athlon.suse.de) (gcc version 3.3 20030226 (prerelease) (SuSE Linux)) #1 Mon Mar 17 17:56:47 UTC 2003 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 0000000027ff0000 (usable) <4> BIOS-e820: 0000000027ff0000 - 0000000027ff8000 (ACPI data) <4> BIOS-e820: 0000000027ff8000 - 0000000028000000 (ACPI NVS) <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) <4> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) <5>0MB HIGHMEM available. <5>639MB LOWMEM available. <7>ACPI: have wakeup address 0xc0001000 <4>On node 0 totalpages: 163824 <4>zone(0): 4096 pages. <4>zone(1): 159728 pages. <4>zone(2): 0 pages. <6>ACPI: RSDP (v000 AMI ) @ 0x000fa340 <6>ACPI: RSDT (v001 AMIINT SiS735XX 00000.04096) @ 0x27ff0000 <6>ACPI: FADT (v001 AMIINT SiS735XX 00000.04096) @ 0x27ff0030 <6>ACPI: DSDT (v001 SiS 735 00000.00256) @ 0x00000000 <5>ACPI: BIOS passes blacklist <4>Building zonelist for node : 0 <4>Kernel command line: root=/dev/hdb3 vga=0x317 hdc=ide-scsi hdclun=0 splash=silent splash=silent <6>ide_setup: hdc=ide-scsi <6>ide_setup: hdclun=0 <6>bootsplash: silent mode. <6>bootsplash: silent mode. <6>Initializing CPU#0 <4>Detected 1792.397 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 3578.26 BogoMIPS <6>Memory: 643680k/655296k available (1696k kernel code, 11228k reserved, 572k data, 172k init, 0k highmem) <6>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) <6>Inode cache hash table entries: 65536 (order: 7, 524288 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) <4>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) <4>CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 256K (64 bytes/line) <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 0183f9ff c1c3f9ff 00000000 00000000 <7>CPU: Common caps: 0183f9ff c1c3f9ff 00000000 00000000 <4>CPU: AMD Athlon(tm) XP 2200+ stepping 01 <6>Enabling fast FPU save and restore... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <6>ACPI: Subsystem revision 20030228 <6>PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 <6>PCI: Using configuration type 1 <6>ACPI: Interpreter enabled <6>ACPI: Using PIC for interrupt routing <6>ACPI: System [ACPI] (supports S0 S1 S4 S5) <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <6>ACPI: Power Resource [URP1] (off) <6>ACPI: Power Resource [URP2] (off) <6>ACPI: Power Resource [FDDP] (off) <6>ACPI: Power Resource [LPTP] (off) <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15, disabled) <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15, disabled) <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15) <6>PCI: Probing PCI hardware <4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 <4>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 <6>PCI: Using ACPI for IRQ routing <6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) <5>apm: overridden by ACPI. <4>Starting kswapd <4>bigpage subsystem: allocated 0 bigpages (=0MB). <4>kinoded started <5>VFS: Disk quotas vdquot_6.5.1 <5>aio_setup: num_physpages = 40956 <5>aio_setup: sizeof(struct page) = 48 <6>vesafb: framebuffer at 0xc0000000, mapped to 0xe8814000, size 65536k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=1 <6>vesafb: protected mode interface info at c000:e390 <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <6>Looking for splash picture.... silenjpeg size 30311 bytes, found (1024x768, 23130 bytes, v3). <6>Got silent jpeg. <6>Got silent jpeg. <4>Console: switching to colour frame buffer device 118x38 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10e <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>loop: loaded (max 16 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>SIS5513: IDE controller at PCI slot 00:02.5 <6>SIS5513: chipset revision 208 <6>SIS5513: not 100%% native mode: will probe irqs later <4>SiS735 ATA 100 controller <6> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA <6> ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA <4>hda: IC35L080AVVA07-0, ATA DISK drive <4>hdb: IBM-DTTA-350640, ATA DISK drive <4>blk: queue c03caa40, I/O limit 4095Mb (mask 0xffffffff) <4>blk: queue c03cab94, I/O limit 4095Mb (mask 0xffffffff) <4>hdd: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hda: attached ide-disk driver. <4>hda: host protected area => 1 <6>hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=10011/255/63, UDMA(100) <4>hdb: attached ide-disk driver. <4>hdb: host protected area => 1 <6>hdb: 12692736 sectors (6499 MB) w/468KiB Cache, CHS=790/255/63, UDMA(33) <4>ide-floppy driver 0.99.newide <6>Partition check: <6> hda: hda1 hda2 < hda5 hda6 hda7 > <6> hdb: hdb1 hdb2 hdb3 hdb4 <4>ide-floppy driver 0.99.newide <6>SCSI subsystem driver Revision: 1.00 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 8192 buckets, 64Kbytes <6>TCP: Hash tables configured (established 262144 bind 65536) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <5>RAMDISK: Compressed image found at block 0 <6>Freeing initrd memory: 519k freed <4>VFS: Mounted root (ext2 filesystem). <6>sym.0.11.0: setting PCI_COMMAND_PARITY... <6>sym0: <810a> rev 0x23 on pci bus 0 device 11 function 0 irq 11 <4>sym0: Symbios NVRAM, ID 7, Fast-10, SE, parity checking <4>sym0: open drain IRQ line driver <4>sym0: using LOAD/STORE-based firmware. <5>sym0: SCSI BUS has been reset. <6>scsi0 : sym-2.1.17a <4>blk: queue c1acea14, I/O limit 4095Mb (mask 0xffffffff) <4> Vendor: TEAC Model: CD-R56S Rev: 1.0H <4> Type: CD-ROM ANSI SCSI revision: 02 <4>blk: queue c1acee14, I/O limit 4095Mb (mask 0xffffffff) <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (ide0(3,67)) for (ide0(3,67)) <4>Warning, log replay starting on readonly filesystem <4>reiserfs: replayed 2 transactions in 3 seconds <4>Using r5 hash to sort names <4>VFS: Mounted root (reiserfs filesystem) readonly. <5>Trying to move old root to /initrd ... failed <5>Unmounting old root <5>Trying to free ramdisk memory ... okay <6>Freeing unused kernel memory: 172k freed <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <4>Removing [30053 124353 0x0 SD]..done <4>Removing [30053 124352 0x0 SD]..done <4>Removing [41958 62707 0x0 SD]..done <4>Removing [1893 41958 0x0 SD]..done <4>Removing [44899 31113 0x0 SD]..done <4>There were 5 uncompleted unlinks/truncates. Completed <6>LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded <6>Adding Swap: 530104k swap-space (priority 42) <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (ide0(3,66)) for (ide0(3,66)) <4>reiserfs: replayed 3 transactions in 3 seconds <4>Using r5 hash to sort names <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (ide0(3,68)) for (ide0(3,68)) <4>reiserfs: replayed 31 transactions in 19 seconds <4>Using r5 hash to sort names <4>blk: queue c03caa40, I/O limit 4095Mb (mask 0xffffffff) <4>blk: queue c03cab94, I/O limit 4095Mb (mask 0xffffffff) <4>ide-floppy driver 0.99.newide <4>hdd: attached ide-cdrom driver. <4>hdd: ATAPI 48X DVD-ROM drive, 512kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <4>hdd: CHECK for good STATUS Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Thu Oct 9 00:40:29 2003 Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A modprobe: modprobe: Can't locate module char-major-212 Configured serial ports doneRun file system check on root for LVM activation doneRemounting root file system (/) read/write for vgscan... Scanning for LVM volume groups... vgscan -- reading all physical volumes (this may take a while...) vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group Activating LVM volume groups... vgchange -- no volume groups found done Activating swap-devices in /etc/fstab... doneChecking file systems... fsck 1.28 (31-Aug-2002) Reiserfs super block in block 16 on 0x343 of format 3.6 with standard journal Blocks (total/free): 847428/355392 by 4096 bytes Filesystem is clean Reiserfs super block in block 16 on 0x342 of format 3.6 with standard journal Blocks (total/free): 26105/16320 by 4096 bytes Filesystem is NOT clean Reiserfs super block in block 16 on 0x344 of format 3.6 with standard journal Blocks (total/free): 580348/71399 by 4096 bytes Filesystem is NOT clean doneMounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hdb2 on /boot type reiserfs (rw) /dev/hdb4 on /usr type reiserfs (rw) doneLoading required kernel modules doneSetting up IDE DMA mode /dev/hda: setting using_dma to 1 (on) setting xfermode to 69 (UltraDMA mode5) using_dma = 1 (on) /dev/hdb: setting using_dma to 1 (on) setting xfermode to 66 (UltraDMA mode2) using_dma = 1 (on) /dev/hdd: setting using_dma to 1 (on) setting xfermode to 66 (UltraDMA mode2) using_dma = 1 (on) done Restore device permissions done Activating remaining swap-devices in /etc/fstab... doneMounting shared memory FS on /dev/shm done Setting up the CMOS clock done Setting up timezone data done Setting up hostname 'tower' done Setting up loopback interface done Enabling syn flood protection done Disabling IP forwarding done Creating /var/log/boot.msg done<notice>killproc: kill(31,29) Running /etc/init.d/boot.local done Boot logging started on /dev/tty1(/dev/console) at Wed Oct 8 22:41:01 2003 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Starting Firewall Initialization (phase 1 of 3) <notice>killproc: kill(31,3) INIT: Entering runlevel: 5 <notice>/etc/init.d/rc5.d/S01SuSEfirewall2_init start done <notice>'/etc/init.d/rc5.d/S01SuSEfirewall2_init start' exits with status 0 <notice>/etc/init.d/rc5.d/S01isdn start <notice>'/etc/init.d/rc5.d/S01isdn start' exits with status 0 Initializing random number generator<notice>/etc/init.d/rc5.d/S01random start done <notice>'/etc/init.d/rc5.d/S01random start' exits with status 0 <notice>/etc/init.d/rc5.d/S05network start Setting up network interfaces: lo done eth0 IP/Netmask: 192.168.0.20 / 255.255.255.0 done ppp0 manual <notice>'/etc/init.d/rc5.d/S05network start' exits with status 0 Starting syslog services<notice>/etc/init.d/rc5.d/S06syslog start <notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/dhcp/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=21 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/syslogd ] <notice> done Starting hotplugging services [startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=21 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/klogd ] <notice>'/etc/init.d/rc5.d/S06syslog start' exits with status 0 <notice>/etc/init.d/rc5.d/S07hotplug start ieee1394 net pci usb .. ] done Starting resource manager<notice>'/etc/init.d/rc5.d/S07hotplug start' exits with status 0 <notice>/etc/init.d/rc5.d/S08resmgr start <notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=23 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/resmgrd ] done Starting Firewall Initialization (phase 2 of 3) <notice>'/etc/init.d/rc5.d/S08resmgr start' exits with status 0 <notice>/etc/init.d/rc5.d/S09SuSEfirewall2_setup start done Starting RPC portmap daemon<notice>'/etc/init.d/rc5.d/S09SuSEfirewall2_setup start' exits with status 0 <notice>/etc/init.d/rc5.d/S09portmap start done <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/portmap ] <notice>'/etc/init.d/rc5.d/S09portmap start' exits with status 0 <notice>/etc/init.d/rc5.d/S09splash_early start <notice>'/etc/init.d/rc5.d/S09splash_early start' exits with status 0 <notice>/etc/init.d/rc5.d/S10wwwoffle start Starting service wwwoffle<notice>startproc: execve (/usr/sbin/wwwoffled) [ /usr/sbin/wwwoffled -c /etc/wwwoffle/wwwoffle.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/wwwoffled ] done Starting Firewall Initialization (phase 3 of 3) <notice>'/etc/init.d/rc5.d/S10wwwoffle start' exits with status 0 <notice>/etc/init.d/rc5.d/S11SuSEfirewall2_final start done <notice>'/etc/init.d/rc5.d/S11SuSEfirewall2_final start' exits with status 0 <notice>/etc/init.d/rc5.d/S13alsasound start Starting sound driver: intel8x0 done Restoring the previous sound setting done <notice>'/etc/init.d/rc5.d/S13alsasound start' exits with status 0 <notice>/etc/init.d/rc5.d/S13cups start Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=30 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] done <notice>'/etc/init.d/rc5.d/S13cups start' exits with status 0 <notice>/etc/init.d/rc5.d/S13fbset start Searching for unresolved configuration files<notice>'/etc/init.d/rc5.d/S13fbset start' exits with status 0 <notice>/etc/init.d/rc5.d/S13rpmconfigcheck start done Starting SMPPPD<notice>'/etc/init.d/rc5.d/S13rpmconfigcheck start' exits with status 0 <notice>/etc/init.d/rc5.d/S13smpppd start <notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ] done <notice>'/etc/init.d/rc5.d/S13smpppd start' exits with status 0 <notice>/etc/init.d/rc5.d/S13sshd start Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=34 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] done <notice>'/etc/init.d/rc5.d/S13sshd start' exits with status 0 <notice>/etc/init.d/rc5.d/S14kbd start Loading keymap qwertz/de-latin1-nodeadkeys.map.gz doneLoading compose table latin1.add done Loading console font lat9w-16.psfu doneLoading screenmap trivial doneSetting up console ttys done<notice>'/etc/init.d/rc5.d/S14kbd start' exits with status 0 <notice>/etc/init.d/rc5.d/S14postfix start Starting mail service (Postfix) done Starting service at daemon<notice>'/etc/init.d/rc5.d/S14postfix start' exits with status 0 <notice>/etc/init.d/rc5.d/S14splash start <notice>'/etc/init.d/rc5.d/S14splash start' exits with status 0 <notice>/etc/init.d/rc5.d/S15atd start <notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=38 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/atd ] done <notice>'/etc/init.d/rc5.d/S15atd start' exits with status 0 <notice>/etc/init.d/rc5.d/S15capisuite start Starting CapiSuite <notice>startproc: execve (/usr/bin/capisuite) [ /usr/bin/capisuite -d ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=39 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/bin/capisuite ] done Starting CRON daemon done Starting hardware scan on boot<notice>'/etc/init.d/rc5.d/S15capisuite start' exits with status 0 <notice>/etc/init.d/rc5.d/S15cron start <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=40 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/cron ] <notice>'/etc/init.d/rc5.d/S15cron start' exits with status 0 <notice>/etc/init.d/rc5.d/S15hwscan start <notice>'/etc/init.d/rc5.d/S15hwscan start' exits with status 0 Starting Name Service Cache Daemon<notice>/etc/init.d/rc5.d/S15nscd start <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=42 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] done <notice>'/etc/init.d/rc5.d/S15nscd start' exits with status 0 <notice>/etc/init.d/rc5.d/S16splash_late start <notice>'/etc/init.d/rc5.d/S16splash_late start' exits with status 0 <notice>/etc/init.d/rc5.d/S16xdm start Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL=de_DE@euro.UTF-8 http_proxy=http://localhost:8080 progress=44 INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm ftp_proxy=http://localhost:8080 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x317 RUNLEVEL=5 LC_COLLATE=POSIX PWD=/ gopher_proxy=http://192.168.0.10:3128 LANG=de_DE@euro PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 no_proxy=192.168.0.0 RC_LC_COLLATE=POSIX WINDOWMANAGER=/usr/X11R6/bin/kde PRINTER=lp RC_LANG=de_DE@euro LC_CTYPE=de_DE@euro splash=silent sscripts=44 LC_TIME= RC_LC_ALL=de_DE@euro.UTF-8 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] done Starting Red Carpet Daemon<notice>'/etc/init.d/rc5.d/S16xdm start' exits with status 0 <notice>/etc/init.d/rc5.d/S20rcd start <notice>startproc: execve (/usr/sbin/rcd) [ /usr/sbin/rcd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=45 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=38 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/rcd ] done Master Resource Control: runlevel 5 has been reached <notice>'/etc/init.d/rc5.d/S20rcd start' exits with status 0 <notice>killproc: kill(613,3) -- Kai Krämer Reduitstr. 19 76829 Landau +49 6341 348753
Hallo, Am Wed, 08 Oct 2003, Kai Krämer schrieb:
Ein 'exits with status 0' sollte doch bestimmt nicht dabei sein ?!?!? Ich habe (probeweise) die ganze boot.msg mal angehangen. Hier sind doch bestimmt viele mit einem geschulten Auge dabei. Welche Fehler muß ich denn unbedingt beheben? ----------------------------------------------------------- /var/log/boot.msg [..] <4>Kernel command line: root=/dev/hdb3 vga=0x317 hdc=ide-scsi hdclun=0 [..] ^^^^^^^^^^^^ <4>hdd: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive ^^^
Aendere das in der menu.lst bzw. lilo.conf
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
[..]
<6>sym.0.11.0: setting PCI_COMMAND_PARITY... <6>sym0: <810a> rev 0x23 on pci bus 0 device 11 function 0 irq 11 <4>sym0: Symbios NVRAM, ID 7, Fast-10, SE, parity checking <4>sym0: open drain IRQ line driver <4>sym0: using LOAD/STORE-based firmware. <5>sym0: SCSI BUS has been reset. <6>scsi0 : sym-2.1.17a
Schreib in deine modules.conf:
alias scsi_hostadapter
<5>Trying to move old root to /initrd ... failed
Das ist normal. Du kannst aber wenn du willst das Verzeichnis /initrd/ anlegen.
<4>hdd: attached ide-cdrom driver. <4>hdd: ATAPI 48X DVD-ROM drive, 512kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <4>hdd: CHECK for good STATUS
So kannst du nicht brennen. Korrigiere die kernel-parameter (s.o.).
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
modprobe: modprobe: Can't locate module char-major-212
Hm. Weiss nicht, was das ist, gehoert zu ttySL0... Laesst sich ggfs. wohl abstellen. [..]
Reiserfs super block in block 16 on 0x342 of format 3.6 with standard journal Blocks (total/free): 26105/16320 by 4096 bytes Filesystem is NOT clean Reiserfs super block in block 16 on 0x344 of format 3.6 with standard journal Blocks (total/free): 580348/71399 by 4096 bytes Filesystem is NOT clean
Damit weiss ich jetzt auch nix anzufangen, ich verwende kein reiserfs.
<notice>'/etc/init.d/rc5.d/S01SuSEfirewall2_init start' exits with status 0
Exitstatus 0 == Fehlerfrei Der Rest sieht ok aus. -dnh -- Frauenbrüste haben mich noch nie interessiert, die hab ich selbst. [Johanna Ostermann in dafk]
On Thu, 2003-10-09 at 01:31, David Haller wrote: Vielen Dank. Werde mich morgen an die Arbeit machen. Gruß, Kai.
participants (2)
-
David Haller
-
Kai Krämer