Hallo Liste, wer kann mir seine Konfiguration bezügl. des Themas beschreiben, damit ich mal vergleichen kann, ob ich irgendwas vergessen habe, oder noch nicht ausprobiert habe. Denn ich bekomme immer noch folgende Fehlermeldung mit Licq.... 02:35:23: [UDP] Requesting logon (#31379)... 02:35:23: [UDP] Resolving icq.mirabilis.com... 02:35:23: [UDP] ICQ server found at 205.188.153.108:4000. 02:35:23: [UDP] Creating local server. 02:35:23: [UDP] Opening socket to server. 02:35:33: [WRN] Timed out after 10 seconds (#31379), retry 1 of 6... 02:35:43: [WRN] Timed out after 10 seconds (#31379), retry 2 of 6... 02:35:53: [WRN] Timed out after 10 seconds (#31379), retry 3 of 6... Konfiguration: SuSE 7.0, Kernel 2.2.16, KDE 2.1 (Client mit Licq 1.0.2) SuSE 7.0 Kernel 2.2.16 (Server) Ich habe einen Kernel (Server), der experimentellen Code zuläßt, Routing und Masquerading funktionieren, da ja alle anderen Netzanwendungen laufen. Zur Fehlereingrenzung läuft nur eine ipchains-Regel für's masquerading: input ACCEPT output ACCEPT forward ACCEPT ipchains -A foward -s 0.0.0.0/0 -d 0.0.0.0/0 -i ppp0 -j MASQ die verschiedenen ipmasq-Module werden ohne Fehler geladen Gibt es Module die sich gegenseitig stören können, bezügl. der hohen Ports ? das lt. SDB notwendige Modul mssclampfw für DSL + masq läuft auch, obwohl ich ohne auch noch keine Probleme hatte Licq habe ich auch schon mehrfach um konfiguriert, und auch schon mit anderen Werten für die PING-Frequency kompiliert. Auf dem Server läuft sonst nur noch ein lokaler tinydns + dnscache (djbdns), der Client hat den lokalen Nameserver als Nameserver eingetragen bekommen. Licq lief auch schon über das Masquerading ohne ip_masq_icq ( 0.56), allerdings kann ich selbst den alten Zustand nicht mehr herbei führen. Das Modul wollte ich einbinden, um eine Firewall über ipchains zu installieren. Für Tips, Hinweise zur Fehlersuche oder verlgeichende Konfigurationen wäre ich dankbar. Gruß Thomas -- Sent through GMX FreeMail - http://www.gmx.net
participants (1)
-
Thomas Wiesner