Moin zusammen, ich weiß, ich bin schuldig. Durch ein Script habe ich die route.conf gelöscht (Schande über mich). Nun würde ich diese ganz gerne wiederherstellen. Wäre nett, wenn ihr mir dabei helfen könntet. So ist die Situation: Es existieren zwei Rechner (A & B bzw. 192.168.100.3 / .4) die über die Netzwerkkarte eth1 (192.168.100.33) verbunden sind. Dies funktioniert auch soweit - also der Ping. Weiter ist eine zweite Netzwerkkarte eth0 eingebaut, die für die den T-DSL Zugang zuständig ist. Der Verbindungsaufbau funktioniert auch, aber ich kann kein Ping verschicken. Bin für jede Idee offen. Der Ansgar PGP-Key ID: 0xE4F4D86B ~ AllesIllusion@gmx.net http://www.allesillusion.de ~ http://www.ielh.de
Am Dienstag, 18. September 2001 23:40 schrieb Ansgar Hinerasky:
Moin zusammen,
ich weiß, ich bin schuldig. Durch ein Script habe ich die route.conf gelöscht (Schande über mich). ... Bin für jede Idee offen.
Am einfachsten mit YaST ;-) Netzwerk-Grundkonfiguration, IP-Einstellungen für die eth1, dort die IP der eth0 (also die momentan vergebene, z.B. 172.16.0.1 - sie wird bei dyn. IP-Vergabe vom ISP geändert) als Gateway, YaST beenden -> SuSEconfig sorgt für den Rest. Das sollte eigentlich klappen. -- Mit besten Grüßen / With kind regards _______________________________________________________________ | Matthias Houdek /// | | <www.houdek.de> /// A long time I've never known | | matthias@houdek.de /// how to love or to hate - but then | | __________________/// I met my first computer with w****** | | NEVER EVER GIVE UP ! | |==============================================================| | *** 16868 Bantikow am See *** Tel.: +49-(0)33979-13932 *** | '~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'
Hallo Leute, Ansgar Hinerasky wrote Tuesday, September 18, 2001 11:40 PM Subject: route.conf ist leer
Moin zusammen,
ich weiß, ich bin schuldig. Durch ein Script habe ich die route.conf gelöscht (Schande über mich). Nun würde ich diese ganz gerne wiederherstellen. Wäre nett, wenn ihr mir dabei helfen könntet. So ist die Situation: Es existieren zwei Rechner (A & B bzw. 192.168.100.3 / .4) die über die Netzwerkkarte eth1 (192.168.100.33) verbunden sind. Dies funktioniert auch soweit - also der Ping. Weiter ist eine zweite Netzwerkkarte eth0 eingebaut, die für die den T-DSL Zugang zuständig ist. Der Verbindungsaufbau funktioniert auch, aber ich kann kein Ping verschicken.
Gateway der Clients: 192.168.100.33 # logisch ;-) route.conf: 192.168.100.0 0.0.0.0 255.255.255.0 eth1 # Route in Dein Heimat-Netz default [IP von NIC des DSL-Routers] eth0 # leider hast Du die IP nicht mitgeliefert Den Eintrag kannst Du aber auch von Yast vornehmen lassen, indem Du für eth1 das Gateway auf eth0 legst. eth0 bekommt als Gateway Deinen DSL-Router. Gruß Guido
participants (3)
-
Ansgar Hinerasky
-
Guido Schiffer
-
Matthias Houdek