Seltsame Fehlermeldung, danach Verlust der Netzwerkverbindung ...
Hallo auch ! Hab grade auf der Konsole eine mir neue Fehlermeldung gefunden, die sich recht lange wiederholt: adjust_timeout: packet supposedly had rtt of 61164982 microseconds. Ignoring time. adjust_timeout: packet supposedly had rtt of 61164955 microseconds. Ignoring time. adjust_timeout: packet supposedly had rtt of 61164950 microseconds. Ignoring time. adjust_timeout: packet supposedly had rtt of 61164943 microseconds. Ignoring time. adjust_timeout: packet supposedly had rtt of 58735422 microseconds. Ignoring time. Als weiterer Effekt tritt auf, daß die Netzwerkverbindung weg ist, mit folgender Fehlermeldung des Kernels : Nov 8 11:15:38 HighFidelity kernel: NETDEV WATCHDOG: eth0: transmit timed out Nov 8 11:15:38 HighFidelity kernel: eth0: transmit timed out, tx_status 00 status e601. Nov 8 11:15:38 HighFidelity kernel: diagnostics: net 0cd8 media 8880 dma 0000003a. Nov 8 11:15:38 HighFidelity kernel: eth0: Interrupt posted but not delivered -- IRQ blocked by another device? Nov 8 11:15:38 HighFidelity kernel: Flags; bus-master 1, dirty 178047(15) current 178047(15) Nov 8 11:15:38 HighFidelity kernel: Transmit list 00000000 vs. cbfd75c0. Nov 8 11:15:38 HighFidelity kernel: 0: @cbfd7200 length 80000036 status 00010036 Nov 8 11:15:38 HighFidelity kernel: 1: @cbfd7240 length 80000036 status 00010036 Nov 8 11:15:38 HighFidelity kernel: 2: @cbfd7280 length 80000036 status 00010036 Nov 8 11:15:38 HighFidelity kernel: 3: @cbfd72c0 length 80000036 status 00010036 Nov 8 11:15:38 HighFidelity kernel: 4: @cbfd7300 length 80000036 status 00010036 Nov 8 11:15:38 HighFidelity kernel: 5: @cbfd7340 length 8000002a status 0001002a Nov 8 11:15:38 HighFidelity kernel: 6: @cbfd7380 length 80000036 status 00010036 Nov 8 11:15:38 HighFidelity kernel: 7: @cbfd73c0 length 80000036 status 00010036 Nov 8 11:15:38 HighFidelity kernel: 8: @cbfd7400 length 80000036 status 00010036 Nov 8 11:15:38 HighFidelity kernel: 9: @cbfd7440 length 80000036 status 00010036 Nov 8 11:15:38 HighFidelity kernel: 10: @cbfd7480 length 80000036 status 00010036 Nov 8 11:15:38 HighFidelity kernel: 11: @cbfd74c0 length 80000036 status 00010036 Nov 8 11:15:38 HighFidelity kernel: 12: @cbfd7500 length 80000036 status 00010036 Nov 8 11:15:38 HighFidelity kernel: 13: @cbfd7540 length 80000036 status 80010036 Nov 8 11:15:38 HighFidelity kernel: 14: @cbfd7580 length 80000036 status 80010036 Nov 8 11:15:38 HighFidelity kernel: 15: @cbfd75c0 length 80000036 status 00010036 Nov 8 11:15:38 HighFidelity kernel: eth0: Resetting the Tx ring pointer. Nov 8 11:15:48 HighFidelity kernel: NETDEV WATCHDOG: eth0: transmit timed out Nov 8 11:15:48 HighFidelity kernel: eth0: transmit timed out, tx_status 00 status e601. Nov 8 11:15:48 HighFidelity kernel: diagnostics: net 0cd8 media 8880 dma 0000003a. Nov 8 11:15:48 HighFidelity kernel: eth0: Interrupt posted but not delivered -- IRQ blocked by another device? Nov 8 11:15:48 HighFidelity kernel: Flags; bus-master 1, dirty 178063(15) current 178063(15) Nov 8 11:15:48 HighFidelity kernel: Transmit list 00000000 vs. cbfd75c0. Nov 8 11:15:48 HighFidelity kernel: 0: @cbfd7200 length 80000036 status 00010036 Nov 8 11:15:48 HighFidelity kernel: 1: @cbfd7240 length 80000036 status 00010036 Nov 8 11:15:48 HighFidelity kernel: 2: @cbfd7280 length 80000036 status 00010036 Nov 8 11:15:48 HighFidelity kernel: 3: @cbfd72c0 length 80000036 status 00010036 Nov 8 11:15:48 HighFidelity kernel: 4: @cbfd7300 length 800000e5 status 000100e5 Nov 8 11:15:48 HighFidelity kernel: 5: @cbfd7340 length 8000002a status 0001002a Nov 8 11:15:48 HighFidelity kernel: 6: @cbfd7380 length 8000002a status 0001002a Nov 8 11:15:48 HighFidelity kernel: 7: @cbfd73c0 length 8000002a status 0001002a Nov 8 11:15:48 HighFidelity kernel: 8: @cbfd7400 length 8000002a status 0001002a Nov 8 11:15:48 HighFidelity kernel: 9: @cbfd7440 length 8000002a status 0001002a Nov 8 11:15:48 HighFidelity kernel: 10: @cbfd7480 length 8000002a status 0001002a Nov 8 11:15:48 HighFidelity kernel: 11: @cbfd74c0 length 800000e5 status 000100e5 Nov 8 11:15:48 HighFidelity kernel: 12: @cbfd7500 length 800000e5 status 000100e5 Nov 8 11:15:48 HighFidelity kernel: 13: @cbfd7540 length 800000ed status 800100ed Nov 8 11:15:48 HighFidelity kernel: 14: @cbfd7580 length 800000ed status 800100ed Nov 8 11:15:48 HighFidelity kernel: 15: @cbfd75c0 length 80000036 status 00010036 Nov 8 11:15:48 HighFidelity kernel: eth0: Resetting the Tx ring pointer. Danach hilft nur noch ein Reboot, der auch seine Zeit in Anspruch nimmt, bis der Rechner wieder will. Zur Systemconfig. : Intel P2 300 Dual auf einem GigaByte Mainboard mit 440 LX Chipsatz, knapp 3,5 Jahre alt. 192 MB Speicher, Permedia2 AGP Grafikkarte, onboard Adaptec UW-SCSI mit 2 cdrom's , 3com netzwerkkarte ( 3Com PCI 3c905B Cyclone 100baseTx ) . Für die, die das genauer wissen wollen habe ich mal die boot.msg angehängt . Danke für jede Idee ! Gruß Roland Inspecting /boot/System.map Loaded 17807 symbols from /boot/System.map. Symbols match kernel version 2.4.4. No module symbols loaded. klogd 1.3-3, log source = ksyslog started. <4>Linux version 2.4.4-SMP (root@HighFidelity) (gcc version 2.95.3 20010315 (SuSE)) #9 SMP Mon Aug 13 22:17:26 CEST 2001 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000000c000000 (usable) <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <4>Scan SMP from c0000000 for 1024 bytes. <4>Scan SMP from c009fc00 for 1024 bytes. <4>Scan SMP from c00f0000 for 65536 bytes. <4>found SMP MP-table at 000f5620 <4>hm, page 000f5000 reserved twice. <4>hm, page 000f6000 reserved twice. <4>hm, page 000f1000 reserved twice. <4>hm, page 000f2000 reserved twice. <4>On node 0 totalpages: 49152 <4>zone(0): 4096 pages. <4>zone(1): 45056 pages. <4>zone(2): 0 pages. <4>Intel MultiProcessor Specification v1.1 <4> Virtual Wire compatibility mode. <4>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 <4>Processor #0 Pentium(tm) Pro APIC version 17 <4> Floating point unit present. <4> Machine Exception supported. <4> 64 bit compare & exchange supported. <4> Internal APIC present. <4> SEP present. <4> MTRR present. <4> PGE present. <4> MCA present. <4> CMOV present. <4> Bootup CPU <4>Processor #1 Pentium(tm) Pro APIC version 17 <4> Floating point unit present. <4> Machine Exception supported. <4> 64 bit compare & exchange supported. <4> Internal APIC present. <4> SEP present. <4> MTRR present. <4> PGE present. <4> MCA present. <4> CMOV present. <4>Bus #0 is PCI <4>Bus #1 is PCI <4>Bus #2 is ISA <4>I/O APIC #2 Version 17 at 0xFEC00000. <4>Int: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 00 <4>Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01 <4>Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02 <4>Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03 <4>Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04 <4>Int: type 0, pol 0, trig 0, bus 2, IRQ 05, APIC ID 2, APIC INT 05 <4>Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06 <4>Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07 <4>Int: type 0, pol 1, trig 1, bus 2, IRQ 08, APIC ID 2, APIC INT 08 <4>Int: type 0, pol 0, trig 0, bus 2, IRQ 09, APIC ID 2, APIC INT 09 <4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0a, APIC ID 2, APIC INT 0a <4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0b, APIC ID 2, APIC INT 0b <4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 2, APIC INT 0c <4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0d, APIC ID 2, APIC INT 0d <4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e <4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 2, APIC INT 0f <4>Int: type 0, pol 3, trig 3, bus 0, IRQ 1c, APIC ID 2, APIC INT 13 <4>Int: type 0, pol 3, trig 3, bus 0, IRQ 24, APIC ID 2, APIC INT 11 <4>Int: type 0, pol 3, trig 3, bus 0, IRQ 30, APIC ID 2, APIC INT 10 <4>Int: type 0, pol 3, trig 3, bus 1, IRQ 00, APIC ID 2, APIC INT 10 <4>Int: type 2, pol 3, trig 1, bus 2, IRQ 00, APIC ID 2, APIC INT 17 <4>Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00 <4>Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01 <4>Processors: 2 <4>mapped APIC to ffffe000 (fee00000) <4>mapped IOAPIC to ffffd000 (fec00000) <4>Kernel command line: auto BOOT_IMAGE=linux ro root=303 BOOT_FILE=/boot/vmlinuz <6>Initializing CPU#0 <4>Detected 300.686 MHz processor. <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 599.65 BogoMIPS <4>Memory: 190428k/196608k available (1534k kernel code, 5796k reserved, 600k data, 208k init, 0k highmem) <4>Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) <4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) <4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes) <4>Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) <5>VFS: Diskquotas version dquot_6.5.0 initialized <7>CPU: Before vendor init, caps: 0080fbff 00000000 00000000, vendor = 0 <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 512K <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After vendor init, caps: 0080fbff 00000000 00000000 00000000 <7>CPU: After generic, caps: 0080fbff 00000000 00000000 00000000 <7>CPU: Common caps: 0080fbff 00000000 00000000 00000000 <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <7>CPU: Before vendor init, caps: 0080fbff 00000000 00000000, vendor = 0 <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 512K <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After vendor init, caps: 0080fbff 00000000 00000000 00000000 <7>CPU: After generic, caps: 0080fbff 00000000 00000000 00000000 <7>CPU: Common caps: 0080fbff 00000000 00000000 00000000 <4>CPU0: Intel Pentium II (Klamath) stepping 04 <4>per-CPU timeslice cutoff: 1463.01 usecs. <4>Getting VERSION: 40011 <4>Getting VERSION: 40011 <4>Getting ID: 0 <4>Getting ID: f000000 <4>Getting LVT0: 700 <4>Getting LVT1: 400 <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>CPU present map: 3 <4>Booting processor 1/1 eip 2000 <4>Setting warm reset code and vector. <4>1. <4>2. <4>3. <4>Asserting INIT. <4>Waiting for send to finish... <4>+Deasserting INIT. <4>Waiting for send to finish... <4>+#startup loops: 2. <4>Sending STARTUP #1. <4>After apic_write. <6>Initializing CPU#1 <4>CPU#1 (phys ID: 1) waiting for CALLOUT <4>Startup point 1. <4>Waiting for send to finish... <4>+Sending STARTUP #2. <4>After apic_write. <4>Startup point 1. <4>Waiting for send to finish... <4>+After Startup. <4>Before Callout 1. <4>After Callout 1. <4>CALLIN, before setup_local_APIC(). <4>masked ExtINT on CPU#1 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 601.29 BogoMIPS <4>Stack at about c130bfbc <7>CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 512K <6>Intel machine check reporting enabled on CPU#1. <7>CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 <7>CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 <7>CPU: Common caps: 0080fbff 00000000 00000000 00000000 <4>OK. <4>CPU1: Intel Pentium II (Deschutes) stepping 02 <4>CPU has booted. <4>Before bogomips. <6>Total of 2 processors activated (1200.94 BogoMIPS). <4>Before bogocount - setting activated=1. <4>Boot done. <4>ENABLING IO-APIC IRQs <6>...changing IO-APIC physical APIC ID to 2 ... ok. <4>Synchronizing Arb IDs. <7>init IO_APIC IRQs <7> IO-APIC (apicid-pin) 2-0, 2-18, 2-20, 2-21, 2-22, 2-23 not connected. <6>..TIMER: vector=49 pin1=2 pin2=0 <7>number of MP IRQ sources: 21. <7>number of IO-APIC #2 registers: 24. <6>testing the IO APIC....................... <4> <7>IO APIC #2...... <7>.... register #00: 02000000 <7>....... : physical APIC id: 02 <7>.... register #01: 00170011 <7>....... : max redirection entries: 0017 <7>....... : IO APIC version: 0011 <7>.... register #02: 00000000 <7>....... : arbitration: 00 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 000 00 1 0 0 0 0 0 0 00 <7> 01 003 03 0 0 0 0 0 1 1 39 <7> 02 003 03 0 0 0 0 0 1 1 31 <7> 03 003 03 0 0 0 0 0 1 1 41 <7> 04 003 03 0 0 0 0 0 1 1 49 <7> 05 003 03 0 0 0 0 0 1 1 51 <7> 06 003 03 0 0 0 0 0 1 1 59 <7> 07 003 03 0 0 0 0 0 1 1 61 <7> 08 003 03 0 0 0 0 0 1 1 69 <7> 09 003 03 0 0 0 0 0 1 1 71 <7> 0a 003 03 0 0 0 0 0 1 1 79 <7> 0b 003 03 0 0 0 0 0 1 1 81 <7> 0c 003 03 0 0 0 0 0 1 1 89 <7> 0d 003 03 0 0 0 0 0 1 1 91 <7> 0e 003 03 0 0 0 0 0 1 1 99 <7> 0f 003 03 0 0 0 0 0 1 1 A1 <7> 10 003 03 1 1 0 1 0 1 1 A9 <7> 11 003 03 1 1 0 1 0 1 1 B1 <7> 12 000 00 1 0 0 0 0 0 0 00 <7> 13 003 03 1 1 0 1 0 1 1 B9 <7> 14 000 00 1 0 0 0 0 0 0 00 <7> 15 000 00 1 0 0 0 0 0 0 00 <7> 16 000 00 1 0 0 0 0 0 0 00 <7> 17 000 00 1 0 0 0 0 0 0 00 <7>IRQ to pin mappings: <7>IRQ0 -> 2 <7>IRQ1 -> 1 <7>IRQ3 -> 3 <7>IRQ4 -> 4 <7>IRQ5 -> 5 <7>IRQ6 -> 6 <7>IRQ7 -> 7 <7>IRQ8 -> 8 <7>IRQ9 -> 9 <7>IRQ10 -> 10 <7>IRQ11 -> 11 <7>IRQ12 -> 12 <7>IRQ13 -> 13 <7>IRQ14 -> 14 <7>IRQ15 -> 15 <7>IRQ16 -> 16 <7>IRQ17 -> 17 <7>IRQ19 -> 19 <6>.................................... done. <4>calibrating APIC timer ... <4>..... CPU clock speed is 300.6938 MHz. <4>..... host bus clock speed is 66.8208 MHz. <4>cpu: 0, clocks: 668208, slice: 222736 <4>CPU0T0:668208,T1:445472,D:0,S:222736,C:668208 <4>cpu: 1, clocks: 668208, slice: 222736 <4>CPU1T0:668208,T1:222736,D:0,S:222736,C:668208 <4>checking TSC synchronization across CPUs: passed. <4>Setting commenced=1, go go go <4>mtrr: your CPUs had inconsistent fixed MTRR settings <4>mtrr: probably your BIOS does not setup all CPUs <4>PCI: PCI BIOS revision 2.10 entry at 0xfacd0, last bus=1 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <3>Unknown bridge resource 2: assuming transparent <6>PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 <6>PCI->APIC IRQ transform: (B0,I7,P3) -> 19 <6>PCI->APIC IRQ transform: (B0,I9,P0) -> 17 <6>PCI->APIC IRQ transform: (B0,I12,P0) -> 16 <6>PCI->APIC IRQ transform: (B1,I0,P0) -> 16 <6>Limiting direct PCI/PCI transfers. <4>isapnp: Scanning for PnP cards... <7>isapnp: Calling quirk for 01:00 <6>isapnp: SB audio device quirk - increasing port range <7>isapnp: Calling quirk for 01:02 <6>isapnp: AWE32 quirk - adding two ports <4>isapnp: Card 'Creative SB AWE64 PnP' <4>isapnp: 1 Plug & Play card detected total <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <6>apm: BIOS not found. <4>Starting kswapd v1.8 <6>Detected PS/2 Mouse Port. <4>pty: 256 Unix98 ptys configured <4>block: queued sectors max/low 126325kB/42108kB, 384 slots per queue <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>PIIX4: IDE controller on PCI bus 00 dev 39 <4>PIIX4: chipset revision 1 <4>PIIX4: not 100%% native mode: will probe irqs later <4> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio <4> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio <4>hda: QUANTUM FIREBALLlct08 26, ATA DISK drive <4>hdd: IBM-DTTA-351010, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>hda: 50859648 sectors (26040 MB) w/418KiB Cache, CHS=3165/255/63, UDMA(33) <6>hdd: 19807200 sectors (10141 MB) w/466KiB Cache, CHS=19650/16/63, UDMA(33) <6>Partition check: <6> hda: hda1 hda2 hda3 <6> hdd: [PTBL] [1232/255/63] hdd1 <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <5>NTFS version 010116 <6>loop: loaded (max 8 devices) <6>Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled <6>Real Time Clock Driver v1.10d <6>3c59x.c:LK1.1.13 27 Jan 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html <6>See Documentation/networking/vortex.txt <6>eth0: 3Com PCI 3c905B Cyclone 100baseTx at 0xe400, 00:04:76:28:c1:81, IRQ 17 <6> product code 4d4c rev 00.12 date 03-01-01 <6> 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. <6> MII transceiver found at address 24, status 786d. <6> Enabling bus-master transmits and whole-frame receives. <6>eth0: scatter/gather enabled. h/w checksums enabled <6>Linux agpgart interface v0.99 (c) Jeff Hartmann <6>agpgart: Maximum main memory to use for agp memory: 150M <6>agpgart: Detected Intel 440LX chipset <6>agpgart: AGP aperture is 64M @ 0xe0000000 <6>SCSI subsystem driver Revision: 1.00 <4>ahc_pci:0:12:0: Using left over BIOS settings <6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13 <4> <Adaptec aic7880 Ultra SCSI adapter> <4> aic7880: Ultra Single Channel A, SCSI Id=7, 16/255 SCBs <4> <4> Vendor: PIONEER Model: CD-ROM DR-U32X Rev: 1.00 <4> Type: CD-ROM ANSI SCSI revision: 02 <4>(scsi0:A:4): 10.000MB/s transfers (10.000MHz, offset 15) <4> Vendor: YAMAHA Model: CDR200t Rev: 1.0h <4> Type: CD-ROM ANSI SCSI revision: 02 <4>Detected scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0 <4>Detected scsi CD-ROM sr1 at scsi0, channel 0, id 6, lun 0 <4>sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray [snipped because too much .. ]
participants (1)
-
Roland Schwarz