Hallo Liste, hoffe ich ja, dass mir jemand raten kann, was da daneben geht ... Der Scanner ist eingeschaltet und hat unter SuSE 8.0 bis vor wenigen Tagen ohne Probleme funktioniert. Installiert: SuSE 8.1 , Sane. server:/home/roland # sane-find-scanner (nix) /etc/modules.conf: alias scsi_hostadapter sym53c416 ls -l /dev/scanners ergibt: crw------- 1 root root 10, 199 2002-12-14 01:00 cuecat server:/home/roland # insmod -p -v sym53c416 Using /lib/modules/2.4.19-4GB/kernel/drivers/scsi/sym53c416.0 insmod sym53c416 Using /lib/modules/2.4.19-4GB/kernel/drivers/scsi/sym53c416.0 (bleibt haengen) cat /var/log/messages (Auszug) May 2 12:33:37 server kernel: sym53c416.c: Version 1.0.0-ac May 2 12:33:37 server kernel: sym53c416: ISAPnP card found and configured at 0x220, IRQ 10. May 2 12:33:37 server kernel: No sym53c416 found at address 0x000 May 2 12:33:37 server kernel: scsi0 : Symbios Logic 53c416 (rev. 151) at 0x220, irq 10, SCSI-ID 7, fast pio May 2 12:33:43 server kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 0x12 00 00 00 ff 00 May 2 12:33:49 server kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 0x12 00 00 00 ff 00 May 2 12:33:49 server kernel: SCSI host 0 abort (pid 0) timed out - resetting May 2 12:33:49 server kernel: SCSI bus is being reset for host 0 channel 0. May 2 12:33:50 server kernel: SCSI host 0 channel 0 reset (pid 0) timed out - trying harder May 2 12:33:50 server kernel: SCSI bus is being reset for host 0 channel 0. May 2 12:33:50 server kernel: SCSI host 0 reset (pid 0) timed out again - May 2 12:33:50 server kernel: probably an unrecoverable SCSI bus or device hang. Ich bin ratlos :-( Vielleicht hat jemand 'ne Idee die weiterhilft? Wuerde mich ja echt freuen... mfg, Roland