eth1 (wlan) wird beim Booten nicht erkannt
Hallo, während des Bootens meiner SuSE 8.1 auf einem Toshiba Laptop wird das Interface eth1 (wlan) nicht erkannt, lo und eth0 (lan) aber schon. Hier die Meldung aus boot.msg: eth1 ifup (debug): eth1 -o onboot rc ifup (debug): Guido: is_iface_available eth1 = false ifup (debug): CONFIG = eth1 INTERFACE = nointerface ifup: Could not get a valid interface name: -> skipped Durch die von mir eingebaute debug-Meldung (2. Zeile) habe ich erkannt, dass die Funktion is_iface_available (aufgerufen in /sbin/ifup) während des Bootens das Interface eth1 nicht findet. Ich kann aber einfach nicht herausfinden warum. Wenn ich _nach_ dem Booten folgendes mache, läuft alles. purzel:~ # ifup eth1 ifup (debug): eth1 ifup (debug): CONFIG = eth1 INTERFACE = eth1 ifup-wireless (debug): eth1 eth1 ifup-wireless (debug): run_iw_tool() config mode Managed ifup-wireless (debug): run_iw_tool() config nick purzel ifup-wireless (debug): run_iw_tool() config essid Wireless ifup (debug): Handling Index <>: IPADDR = 192.168.1.4 PREFIXLEN = 24 CHECK_DUPLICATE_IP = no ifup-route (debug): eth1 eth1 ifup-route (debug): calling: ip route replace to default via 192.168.1.3 ---> OK Hier noch einige weitere Infos: purzel:~ # cardctl ident Socket 0: product info: "TOSHIBA", "Wireless LAN Card", "Version 01.01", "" manfid: 0x0156, 0x0002 function: 6 (network) Socket 1: no product info available Socket 2: no product info available /etc/modules.conf: alias eth0 e100 alias eth1 orinoco purzel:~ # lsmod | grep orinoco orinoco_cs 4488 0 (unused) ds 6436 6 [orinoco_cs] pcmcia_core 40448 0 [orinoco_cs ds yenta_socket] orinoco 29912 0 [orinoco_cs] hermes 5700 0 [orinoco_cs orinoco] /etc/sysconfig/network/ifcfg-eth1: BOOTPROTO='static' BROADCAST='192.168.1.255' IPADDR='192.168.1.4' NETMASK='255.255.255.0' NETWORK='192.168.1.0' REMOTE_IPADDR='' STARTMODE='onboot' UNIQUE='' WIRELESS='yes' WIRELESS_ESSID='Wireless' WIRELESS_KEY='' WIRELESS_MODE='Managed' WIRELESS_NICK='' WIRELESS_NWID='' purzel:~ # iwconfig eth1 eth1 IEEE 802.11-DS ESSID:"Wireless" Nickname:"purzel" Mode:Managed Frequency:2.457GHz Access Point: 44:44:44:44:44:44 Bit Rate:2Mb/s Tx-Power=15 dBm Sensitivity:1/3 Retry limit:4 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality:0/92 Signal level:134/153 Noise level:134/153 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Ich hoffe, ihr könnt mir helfen. Gruß Guido
participants (1)
-
Nottebrok, Guido