Hallo Liste, und Guten Tag an Alle, leider habe ich folgendes Problem: Mein USB-Stick wird beim Einstecken ganz normal gemounted. Dies funktioniert ca. 10-15 mal hintereinander ganz ohne Probleme Danach wird der USB Stick aber nicht mehr eingebunden. Kann dies mit dem HAL-Daemon zusammenhängen? Ein "rchal restart" bringt leider auch keine Besserung. Habt Ihr evtl einen Tipp wie ich hier weitersuchen kann? Hier noch ein Ausschnitt aus der /var/log/messages wenn es funktinoniert: ---------------- Nov 21 15:19:26 linuxNB kernel: usb 5-5: new high speed USB device using ehci_hcd and address 4 Nov 21 15:19:28 linuxNB kernel: Initializing USB Mass Storage driver... Nov 21 15:19:28 linuxNB kernel: scsi2 : SCSI emulation for USB Mass Storage devices Nov 21 15:19:28 linuxNB kernel: usbcore: registered new driver usb-storage Nov 21 15:19:28 linuxNB kernel: USB Mass Storage support registered. Nov 21 15:19:29 linuxNB kernel: usb-storage: device found at 4 Nov 21 15:19:29 linuxNB kernel: usb-storage: waiting for device to settle before scanning Nov 21 15:19:29 linuxNB kernel: Device sr0 not ready. Nov 21 15:19:34 linuxNB kernel: Vendor: LG Model: USB Drive Rev: 1100 Nov 21 15:19:34 linuxNB kernel: Type: Direct-Access ANSI SCSI revision: 00 Nov 21 15:19:34 linuxNB kernel: SCSI device sdb: 3963904 512-byte hdwr sectors (2030 MB) Nov 21 15:19:34 linuxNB kernel: sdb: Write Protect is off Nov 21 15:19:34 linuxNB kernel: sdb: Mode Sense: 43 00 00 00 Nov 21 15:19:34 linuxNB kernel: sdb: assuming drive cache: write through Nov 21 15:19:34 linuxNB kernel: SCSI device sdb: 3963904 512-byte hdwr sectors (2030 MB) Nov 21 15:19:34 linuxNB kernel: sdb: Write Protect is off Nov 21 15:19:34 linuxNB kernel: sdb: Mode Sense: 43 00 00 00 Nov 21 15:19:34 linuxNB kernel: sdb: assuming drive cache: write through Nov 21 15:19:35 linuxNB kernel: sdb: sdb1 Nov 21 15:19:35 linuxNB kernel: Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0 Nov 21 15:19:35 linuxNB kernel: Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0, type 0 Nov 21 15:19:35 linuxNB kernel: usb-storage: device scan complete Nov 21 15:19:35 linuxNB kernel: Device sr0 not ready. Nov 21 15:19:39 linuxNB sudo: abirndt : TTY=pts/2 ; PWD=/home/abirndt ; USER=root ; COMMAND=/usr/bin/tail -f /var/log/messages Nov 21 15:19:41 linuxNB /etc/hotplug.d/block/50-hwscan.hotplug[10175]: new block device /block/sdb Nov 21 15:19:42 linuxNB /etc/hotplug.d/block/50-hwscan.hotplug[10232]: new block device /block/sdb/sdb1 Nov 21 15:19:43 linuxNB kernel: subfs 0.9 Nov 21 15:19:43 linuxNB hal-subfs-mount[10247]: registered at resmgrd and called(0) /bin/mount -t subfs -o fs=floppyfss,procuid,nosuid,nodev,exec /dev/sdb1 "/media/LG_Birndt" Nov 21 15:19:50 linuxNB hal.hotplug[10282]: DEVPATH is not set Nov 21 15:19:53 linuxNB hal.hotplug[10288]: DEVPATH is not set Nov 21 15:19:53 linuxNB hal.hotplug[10294]: DEVPATH is not set -------------------- So siehts aus wenn es nicht funktioniert: --------------------- Nov 21 14:58:27 linuxNB kernel: usb 5-5: USB disconnect, address 16 ==> Disconnect -------------------- ==> new connect Nov 21 14:58:52 linuxNB kernel: usb 5-5: new high speed USB device using ehci_hcd and address 17 Nov 21 14:58:52 linuxNB kernel: scsi15 : SCSI emulation for USB Mass Storage devices Nov 21 14:58:52 linuxNB kernel: usb-storage: device found at 17 Nov 21 14:58:52 linuxNB kernel: usb-storage: waiting for device to settle before scanning Nov 21 14:58:57 linuxNB kernel: Vendor: LG Model: USB Drive Rev: 1100 Nov 21 14:58:57 linuxNB kernel: Type: Direct-Access ANSI SCSI revision: 00 Nov 21 14:58:57 linuxNB kernel: SCSI device sdc: 3963904 512-byte hdwr sectors (2030 MB) Nov 21 14:58:57 linuxNB kernel: sdc: Write Protect is off Nov 21 14:58:57 linuxNB kernel: sdc: Mode Sense: 43 00 00 00 Nov 21 14:58:57 linuxNB kernel: sdc: assuming drive cache: write through Nov 21 14:58:57 linuxNB kernel: SCSI device sdc: 3963904 512-byte hdwr sectors (2030 MB) Nov 21 14:58:57 linuxNB kernel: sdc: Write Protect is off Nov 21 14:58:57 linuxNB kernel: sdc: Mode Sense: 43 00 00 00 Nov 21 14:58:57 linuxNB kernel: sdc: assuming drive cache: write through Nov 21 14:58:57 linuxNB kernel: sdc: sdc1 Nov 21 14:58:57 linuxNB kernel: Attached scsi removable disk sdc at scsi15, channel 0, id 0, lun 0 Nov 21 14:58:57 linuxNB kernel: Attached scsi generic sg2 at scsi15, channel 0, id 0, lun 0, type 0 Nov 21 14:58:57 linuxNB kernel: usb-storage: device scan complete ==> mehr kommt hier nicht -------------- Danke schon mal vorab Axel -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Axel Birndt wrote:
Nov 21 14:58:52 linuxNB kernel: usb 5-5: new high speed USB device using ehci_hcd and address 17 Nov 21 14:58:52 linuxNB kernel: scsi15 : SCSI emulation for USB Mass Storage devices Nov 21 14:58:52 linuxNB kernel: usb-storage: device found at 17 Nov 21 14:58:52 linuxNB kernel: usb-storage: waiting for device to settle before scanning Nov 21 14:58:57 linuxNB kernel: Vendor: LG Model: USB Drive Rev: 1100 Nov 21 14:58:57 linuxNB kernel: Type: Direct-Access ANSI SCSI revision: 00 Nov 21 14:58:57 linuxNB kernel: SCSI device sdc: 3963904 512-byte hdwr sectors (2030 MB) Nov 21 14:58:57 linuxNB kernel: sdc: Write Protect is off Nov 21 14:58:57 linuxNB kernel: sdc: Mode Sense: 43 00 00 00 Nov 21 14:58:57 linuxNB kernel: sdc: assuming drive cache: write through Nov 21 14:58:57 linuxNB kernel: SCSI device sdc: 3963904 512-byte hdwr sectors (2030 MB) Nov 21 14:58:57 linuxNB kernel: sdc: Write Protect is off Nov 21 14:58:57 linuxNB kernel: sdc: Mode Sense: 43 00 00 00 Nov 21 14:58:57 linuxNB kernel: sdc: assuming drive cache: write through Nov 21 14:58:57 linuxNB kernel: sdc: sdc1 Nov 21 14:58:57 linuxNB kernel: Attached scsi removable disk sdc at scsi15, channel 0, id 0, lun 0 Nov 21 14:58:57 linuxNB kernel: Attached scsi generic sg2 at scsi15, channel 0, id 0, lun 0, type 0 Nov 21 14:58:57 linuxNB kernel: usb-storage: device scan complete
==> mehr kommt hier nicht --------------
Er lädt scheinbar das Modul für SCSI-Disk-Support nicht mehr. Es heißt sd_mod. modprobe sd_mod Kommt dann mehr in dem Log? Martin -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Martin Ereth schrieb:
Axel Birndt wrote:
>> Nov 21 14:58:52 linuxNB kernel: usb 5-5: new high speed USB device
using
>> ehci_hcd and address 17 >> Nov 21 14:58:52 linuxNB kernel: scsi15 : SCSI emulation for USB Mass >> Storage devices >> Nov 21 14:58:52 linuxNB kernel: usb-storage: device found at 17 >> Nov 21 14:58:52 linuxNB kernel: usb-storage: waiting for device to >> settle before scanning >> Nov 21 14:58:57 linuxNB kernel: Vendor: LG Model: USB >> Drive Rev: 1100 >> Nov 21 14:58:57 linuxNB kernel: Type: >> Direct-Access ANSI SCSI revision: 00 >> Nov 21 14:58:57 linuxNB kernel: SCSI device sdc: 3963904 512-byte hdwr >> sectors (2030 MB) >> Nov 21 14:58:57 linuxNB kernel: sdc: Write Protect is off >> Nov 21 14:58:57 linuxNB kernel: sdc: Mode Sense: 43 00 00 00 >> Nov 21 14:58:57 linuxNB kernel: sdc: assuming drive cache: write
through
>> Nov 21 14:58:57 linuxNB kernel: SCSI device sdc: 3963904 512-byte hdwr >> sectors (2030 MB) >> Nov 21 14:58:57 linuxNB kernel: sdc: Write Protect is off >> Nov 21 14:58:57 linuxNB kernel: sdc: Mode Sense: 43 00 00 00 >> Nov 21 14:58:57 linuxNB kernel: sdc: assuming drive cache: write
through
>> Nov 21 14:58:57 linuxNB kernel: sdc: sdc1 >> Nov 21 14:58:57 linuxNB kernel: Attached scsi removable disk sdc at >> scsi15, channel 0, id 0, lun 0 >> Nov 21 14:58:57 linuxNB kernel: Attached scsi generic sg2 at scsi15, >> channel 0, id 0, lun 0, type 0 >> Nov 21 14:58:57 linuxNB kernel: usb-storage: device scan complete >> >> ==> mehr kommt hier nicht >> -------------- >>
Er lädt scheinbar das Modul für SCSI-Disk-Support nicht mehr. Es
heißt sd_mod.
modprobe sd_mod
Kommt dann mehr in dem Log?
Martin
Was mich hier wundert ist die Tatsache, das vorher der USB-Stick als sdb1 erkannt wurde und wenn es wie oben zu sehen ist, danach als sdc1 erkannt wird. So, als ob er merkt das sdb1 "besetzt" ist und nunmehr sdc1 verwendet wird.
Nach einem reboot ist dann alles wieder in Ordnung..... (Ich will aber nicht "windoof-like" neu booten....) Danke für Deinen Tip. Ich werde mal probieren mit mod_probe das sd_mod zu laden, wenn das Problem wieder auftritt. Thanks, Axel -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Axel Birndt schrieb:..... apropo, ich habe Suse 9.3 :-) Axel -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
participants (2)
-
Axel Birndt
-
Martin Ereth