Wacom PenPartner unter SuSE 9.2
Hallo, jetzt habe ich aber doch noch ein Problem. Ich habe von Wacom das PenPartner Graphictables und bekomme es nicht richtig eingerichtet. Ich hoffe das Manfred Tremmler das Teil noch in Betrieb hat ;-) am 5. Juni 2001 konnte er mir schon einmal helfen. Wäre schön, Manfred, wenn Du mir da noch mal helfen könntes. Bis zur SuSE 9.0 hatte ich nie Probleme damit, hat immer funktioniert. Jetzt funktioniert es ja auch fast, aber leider nur fast. Der Cursor bewegt sich, die Taste am Stift funktioniert auch, wenn ich den Cursor über ein Icon bewege reagiert das Bildchen. Leider kann ich dann aber keine Action ausführen, sprich das Programm starten. Am Table oder Stift kann es nicht liegen, hab es mal an einer Win-Kiste getestet. Manchmal reagiert das Teil ja doch, wenn ich z.B. mehrmals (20-30 mal) auf das Symbol tippe, dabei hängt es jedoch nicht von der Stärke des Druckes auf die Spitze ab. Ach so, der "Radierer" hat die gleichen Symtome. Vielleicht sollte ich noch erwähnen das das Ding an einem Seriell/USB-Adapter hängt, was 9.0 aber auch nicht gestört hatte. Hier die Auszüge aus der XF86Config Section "Module" Load "extmod" Load "v4l" Load "freetype" Load "type1" Load "wacom" # Wacom Load "dbe" Load "glx" ------------------------------------ Section "InputDevice" Identifier "pen1" Driver "wacom" Option "Type" "stylus" Option "Device" "/dev/usb/ttyUSB0" Option "Mode" "absolute" EndSection Section "InputDevice" Identifier "eraser1" Driver "wacom" Option "Type" "eraser" Option "Device" "/dev/usb/ttyUSB0" Option "Mode" "absolute" EndSection Section "InputDevice" Identifier "cursor1" Driver "wacom" Option "Type" "cursor" Option "Device" "/dev/usb/ttyUSB0" Option "Mode" "absolute" EndSection ------------------------------ Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" InputDevice "pen1" "AlwaysCore" InputDevice "eraser1" "AlwaysCore" InputDevice "cursor1" "AlwaysCore" Option "Clone" "off" Option "Xinerama" "off" Screen "Screen[0]" EndSection Damit hat es eigentlich immer funktioniert. Gibt es vielleicht unter der SuSE 9.2 wieder eine neue Datei wo ich noch etwas zusätzlich eintragen muss? Gruß Harry
Am Sonntag, 23. Januar 2005 17:55 schrieb Harry Konietzke:
Ich habe von Wacom das PenPartner Graphictables und bekomme es nicht richtig eingerichtet. Ich hoffe das Manfred Tremmler das Teil noch in Betrieb hat ;-) am 5. Juni 2001 konnte er mir schon einmal helfen. Wäre schön, Manfred, wenn Du mir da noch mal helfen könntes.
Wäre schön, aber mein Intuos lief nach dem SuSE 9.1 Update auf 9.2 vorher wie nachher.
Section "Module" Load "extmod" Load "v4l" Load "freetype" Load "type1" Load "wacom" # Wacom ^^^^^ Hab ich gar nicht drin.
Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" InputDevice "pen1" "AlwaysCore" InputDevice "eraser1" "AlwaysCore" InputDevice "cursor1" "AlwaysCore"
Da hab ich kein "AlwaysCore", sondern "SendCoreEvents" stehen, vielleicht hilft das weiter. -- Machs gut | http://www.iivs.de/schwinde/buerger/tremmel/ | http://packman.links2linux.de/ Manfred | http://www.knightsoft-net.de
Am Sonntag, 23. Januar 2005 22:03 schrieb Manfred Tremmel:
Load "wacom" # Wacom
^^^^^ Hab ich gar nicht drin.
Habe ich jetzt ausgetragen,
Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" InputDevice "pen1" "AlwaysCore" InputDevice "eraser1" "AlwaysCore" InputDevice "cursor1" "AlwaysCore"
Da hab ich kein "AlwaysCore", sondern "SendCoreEvents" stehen,
und das auch geändert. Hat aber leider nichts gebracht. Schade :-( Da ich doch schon öfter mal mit dem Teil unter Gimp male, bzw. gemalt habe, werde ich wohl die 9.0 von SuSE wieder ausgraben. Danke Gruß Harry
participants (2)
-
Harry Konietzke
-
Manfred Tremmel