Promise (fasttrack) pdc20378 on motherboard aka using all 2 SATA / 4 ATA and 2 ATA on the 20378 at one time on ASUS boards
my motherboard is a P4C800E-Deluxe ... but should be the same for the other P4C800 ICH5/875P based boards Bios detects the single drive that I've put on the pdc20378 controller I have added drives on all the controllers to see if I could use them all HAVE ANY OF YOU TRIED THIS Or do I have to drop using the 2'nd ATA interface to get lucky ?? Thanx up front for any suggestion The details *************** $ fdisk -l (doesn't show the drive I got there) OK checking if drivers gets loaded lsmod partial snip cdrom 39452 2 sr_mod,ide_cd reiserfs 251984 6 sata_promise 14980 0 ata_piix 8580 0 libata 40192 2 sata_promise,ata_piix,[permanent] sd_mod 21632 0 scsi_mod 114372 6 sg,st,sr_mod,sata_promise,libata,sd_mod *************** $ hwinfo --storage-ctrl partial snip 30: PCI 304.0: 0104 RAID bus controller [Created at pci.244] Unique ID: AMUB.Riy0go04uj1 Parent ID: 6NW+.c7JTK_YUBi2 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:04.0 SysFS BusID: 0000:03:04.0 Hardware Class: storage Model: "Asustek PDC20378 (SATA150 TX)" Vendor: pci 0x105a "Promise Technology, Inc." Device: pci 0x3373 "PDC20378 (SATA150 TX)" SubVendor: pci 0x1043 "Asustek Computer, Inc." SubDevice: pci 0x80f5 Revision: 0x02 Driver: "sata_promise" I/O Ports: 0xdf00-0xdf3f (rw) I/O Ports: 0xdfa0-0xdfaf (rw) I/O Ports: 0xd880-0xd8ff (rw) Memory Range: 0xfeaff000-0xfeafffff (rw,non-prefetchable) Memory Range: 0xfeac0000-0xfeadffff (rw,non-prefetchable) IRQ: 23 (no events) Driver Info #0: Driver Status: sata_promise is active Driver Activation Cmd: "modprobe sata_promise" Config Status: cfg=yes, avail=yes, need=no, active=unknown Attached to: #21 (PCI bridge) the sata_promise modules gets loaded
For your information: Johan Nielsen wrote:
my motherboard is a P4C800E-Deluxe ... but should be the same for the other P4C800 ICH5/875P based boards [...]
Please use suse-linux-e instead of suse-linux if you wish to ask questions in English. suse-linux is a German mailing list, not everybody here is familiar with English which might explain why nobody has responded to your question so far. Of course, it can also happen that nobody has any answer or suggestion... :-) With best regards, Th.
Jawol War ein kleines mishab ;-) Aber hoffe doch sehr dass ihr noch englisch in der Schule habt Und hier ist die deutsche verfassung: Mein motherboard ist ne P4C800E-Deluxe ...aber sollte auch dass gleiche für P4C800 ICH5/875P basierte boards sein Bios detektiert der Festplatte die ich an dir 20378 Controller angeschlossen habe Ich habe festplatten / CD/DVD's an alle Schnitstellen des PC's um zu sehen was da auftaucht Hat jemand glück mit dies ??? Oder sollte ich der 2'te ATA frei halten und nachschauen Währe sehr dankbar für tips/Erfahrungen ???? Details *************** $ fdisk -l (Zeigt nichts auf'm pdc20378 Controller an) OK werden die Modules geladen lsmod partial snip cdrom 39452 2 sr_mod,ide_cd reiserfs 251984 6 sata_promise 14980 0 ata_piix 8580 0 libata 40192 2 sata_promise,ata_piix,[permanent] sd_mod 21632 0 scsi_mod 114372 6 sg,st,sr_mod,sata_promise,libata,sd_mod *************** $ hwinfo --storage-ctrl TElL snip vom output 30: PCI 304.0: 0104 RAID bus controller [Created at pci.244] Unique ID: AMUB.Riy0go04uj1 Parent ID: 6NW+.c7JTK_YUBi2 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:04.0 SysFS BusID: 0000:03:04.0 Hardware Class: storage Model: "Asustek PDC20378 (SATA150 TX)" Vendor: pci 0x105a "Promise Technology, Inc." Device: pci 0x3373 "PDC20378 (SATA150 TX)" SubVendor: pci 0x1043 "Asustek Computer, Inc." SubDevice: pci 0x80f5 Revision: 0x02 Driver: "sata_promise" I/O Ports: 0xdf00-0xdf3f (rw) I/O Ports: 0xdfa0-0xdfaf (rw) I/O Ports: 0xd880-0xd8ff (rw) Memory Range: 0xfeaff000-0xfeafffff (rw,non-prefetchable) Memory Range: 0xfeac0000-0xfeadffff (rw,non-prefetchable) IRQ: 23 (no events) Driver Info #0: Driver Status: sata_promise is active Driver Activation Cmd: "modprobe sata_promise" Config Status: cfg=yes, avail=yes, need=no, active=unknown Attached to: #21 (PCI bridge) Die sata_promise Modulen wird geladen Tirsdag 15 juni 2004 09:37 skrev Thomas Hertweck:
For your information:
Johan Nielsen wrote:
my motherboard is a P4C800E-Deluxe ... but should be the same for the other P4C800 ICH5/875P based boards [...]
Please use suse-linux-e instead of suse-linux if you wish to ask questions in English. suse-linux is a German mailing list, not everybody here is familiar with English which might explain why nobody has responded to your question so far. Of course, it can also happen that nobody has any answer or suggestion... :-)
With best regards, Th.
participants (2)
-
Johan Nielsen -
Thomas Hertweck