gtk-config script .. could not be found
Hallo, ./configure vor dem Compilieren von sane-1.0.1 (Suse 6.4) gibt aus: ... *** The gtk-config script installed by GTK could not be found *** If GTK was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GTK_CONFIG environment variable to the *** full path to gtk-config. ... Dann erzeugt make auch kein xscanimage. :(( Das Paket [i] gtkdev Paket für GTK-Entwicklungen habe ich hinzuinstalliert. (ca. Weihnachten 1999 habe ich das schonmal in diese Liste eingestellt und diesen Hinweise bekommen. Damals mit Suse 6.1 das gleiche Problem wie jetzt mit Suse 6.4) Aber der Fehler bleibt! Kann mir jemand weiterhelfen ?? BTW: 1. installiert ist: [i] gtk Bibliothek zur Erstellung grafischer Oberfläche 2. ich muss sane neu kompilieren, weil mein Scanner (Mustek 12000SP) eine leicht andere ID hat als sane vorsieht, nämlich XC06 statt C06. Erst danach ist der Scanner ansprechbar. Mit "scanimage mustek:/dev/sga" scannt das Gerät auch tatsächlich nach der Neucompilierung. scanimage wird von make neu erstellt, nicht aber xscanimage. xscanimage ist wiederum als plugin für gimp notwendig. tia Ekkard --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Hallo,
./configure vor dem Compilieren von sane-1.0.1 (Suse 6.4) gibt aus:
... *** The gtk-config script installed by GTK could not be found *** If GTK was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GTK_CONFIG environment variable to the *** full path to gtk-config. ... Welche GTK Version ist das den? Ich meine das hätte ich vor ein
Am Sat, 06 May 2000, schrieb Ekkard Gerlach: paar Tagen beim übersetzen von spruce gesehen. Da hat es ein Update der Packete glib und gtk+ gebracht (www.gtk.org). Komischerweise musste ich danach einmal komplett neustarten. Ein ldconfig und init 1 haben nichts gebracht. Cu, Sven --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Sven Hoexter wrote:
Hallo,
./configure vor dem Compilieren von sane-1.0.1 (Suse 6.4) gibt aus:
... *** The gtk-config script installed by GTK could not be found *** If GTK was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GTK_CONFIG environment variable to the *** full path to gtk-config. ... Welche GTK Version ist das den? Ich meine das hätte ich vor ein
Am Sat, 06 May 2000, schrieb Ekkard Gerlach: paar Tagen beim übersetzen von spruce gesehen. Da hat es ein
alles von Suse 6.4-CD's: gerlach@rex:~ > rpm -qa | grep gtk gtk-1.2.7-13 gtkdev-1.0.6-36 Gibts es neuere ? Ich vermute eher einen anderen Fehler als den der Version . Der tupfegleiche Fehler war schon bei Suse6.1. Oder: es ist immer eine etwas veraltete Version v. gtk auf den Suse-CD's, so dass diese eben gerade nicht mehr mit sane harmonieren. Hmmm .. Gruss Ekkard --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Ekkard Gerlach wrote:
Am Sat, 06 May 2000, schrieb Ekkard Gerlach:
Hallo,
./configure vor dem Compilieren von sane-1.0.1 (Suse 6.4) gibt aus:
... *** The gtk-config script installed by GTK could not be found *** If GTK was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GTK_CONFIG environment variable to the *** full path to gtk-config. ... Der tupfegleiche Fehler war schon bei Suse6.1. Oder: es ist immer eine etwas veraltete Version v. gtk auf den Suse-CD's, so dass diese eben gerade nicht mehr mit sane harmonieren. Hmmm ..
Nö - 1.2.7 ist schon aktuell, außerdem verlangt sane nur nach Version >=0.99.13. Ich glaube eher, es liegt an einer defekten Installation. Was sagt: 'locate gtk-config' ? 'rpm -q -f gtkdev| grep gtk-config' ? Das Script sollte in /usr/bin/ liegen. Björn --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Bjoern Krombholz wrote:
Ekkard Gerlach wrote:
Am Sat, 06 May 2000, schrieb Ekkard Gerlach:
Hallo,
./configure vor dem Compilieren von sane-1.0.1 (Suse 6.4) gibt aus:
... *** The gtk-config script installed by GTK could not be found *** If GTK was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GTK_CONFIG environment variable to the *** full path to gtk-config. ... Der tupfegleiche Fehler war schon bei Suse6.1. Oder: es ist immer eine etwas veraltete Version v. gtk auf den Suse-CD's, so dass diese eben gerade nicht mehr mit sane harmonieren. Hmmm ..
Nö - 1.2.7 ist schon aktuell, außerdem verlangt sane nur nach Version >=0.99.13. Ich glaube eher, es liegt an einer defekten Installation.
Was sagt: 'locate gtk-config' ? 'rpm -q -f gtkdev| grep gtk-config' ?
rex:~ # locate gtk-config /usr/bin/gtk-config /usr/man/man1/gtk-config.1.gz /usr/share/man/allman/man1/gtk-config.1.gz /var/cache/man/fsstnd/cat1/gtk-config.1.gz rex:~ # rpm -q -f gtkdev| grep gtk-config file gtkdev: No such file or directory dafür aber: rex:~ # rpm -q -f /usr/bin/gtk-config gtkdev-1.0.6-36 und rex:~ # rpm -q -l gtkdev-1.0.6-36| grep gtk-config /usr/bin/gtk-config /usr/man/man1/gtk-config.1.gz
Das Script sollte in /usr/bin/ liegen. Stimmt
besten Dank Ekkard --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Ekkard Gerlach wrote:
Bjoern Krombholz wrote:
Was sagt: 'locate gtk-config' ? 'rpm -q -f gtkdev| grep gtk-config' ?
rex:~ # locate gtk-config /usr/bin/gtk-config /usr/man/man1/gtk-config.1.gz /usr/share/man/allman/man1/gtk-config.1.gz /var/cache/man/fsstnd/cat1/gtk-config.1.gz
rex:~ # rpm -q -f gtkdev| grep gtk-config file gtkdev: No such file or directory
Thinko, so wär's richtig gewesen: rpm -q -l gtkdev | grep gtk-config Oder gleich: rpm -qa -l | grep gtk-config Ralf --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Ekkard Gerlach wrote:
rex:~ # rpm -q -f gtkdev| grep gtk-config file gtkdev: No such file or directory
Oops - Tippfehler...
rex:~ # locate gtk-config /usr/bin/gtk-config
Ist das Script ausführbar fuer den User, der configure aufruft? 'ls -l /usr/bin/gtk-config' Funktioniert '/usr/bin/gtk-config --version'? Björn --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
participants (5)
-
bjkro@gmx.de
-
corsepiu@faw.uni-ulm.de
-
egerlach@nikocity.de
-
hoexter@orgaprog.de
-
ml_gerlach@nikocity.de