Moin, was will mir folgendes sagen? May 4 14:53:11 matthew kernel: [50306.537652] phyerr 0x20, rate 0xa May 4 14:53:11 matthew kernel: [50306.537685] Raw TxDesc + plcp header: May 4 14:53:11 matthew kernel: [50306.537717] 0000: 08 00 00 00 40 00 00 00 00 00 02 00 02 00 00 00 May 4 14:53:11 matthew kernel: [50306.537751] 0016: 00 00 0a 00 00 07 00 00 00 00 00 00 00 00 00 00 May 4 14:53:11 matthew kernel: [50306.537784] 0032: 00 00 00 00 00 00 ff ff ff ff ff ff 00 00 00 00 May 4 14:53:11 matthew kernel: [50306.537817] 0048: 00 00 00 00 00 00 0a 04 68 02 4d 00 00 00 00 00 May 4 14:53:11 matthew kernel: [50306.537850] 0064: 00 00 00 00 00 00 00 00 00 00 00 00 03 62 00 00 May 4 14:53:11 matthew kernel: [50306.537883] 0080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 May 4 14:53:11 matthew kernel: [50306.537916] 0096: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 May 4 14:53:11 matthew kernel: [50306.537950] 0112: 0a 04 68 02 00 00 40 00 00 00 ff ff ff ff ff ff May 4 14:53:11 matthew kernel: [50306.537983] 0128: 4c ed de ef 0a a5 ff ff ff ff ff ff 10 2b 00 00 May 4 14:53:11 matthew kernel: [50306.538017] 0144: 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c May 4 14:53:11 matthew kernel: [50306.538041] TxCtlLow: 0008 TxCtlHigh: 0000 FC: 0040 FES Time: 0000 May 4 14:53:11 matthew kernel: [50306.538073] PhyCtl: 0000 PhyCtl_1: 0002 PhyCtl_1_Fbr: 0002 May 4 14:53:11 matthew kernel: [50306.538099] PhyCtl_1_Rts: 0000 PhyCtl_1_Fbr_Rts: 0000 May 4 14:53:11 matthew kernel: [50306.538123] MainRates: 000a XtraFrameTypes: 0700 May 4 14:53:11 matthew kernel: [50306.538157] SecIV: 00000000000000000000000000000000 May 4 14:53:11 matthew kernel: [50306.538182] RA: FFFFFFFFFFFF May 4 14:53:11 matthew kernel: [50306.538202] Fb FES Time: 0000 RTS PLCP: 000000000000 RTS DUR: 0000 PLCP: 0A0468024D00 DUR: 0000 May 4 14:53:11 matthew kernel: [50306.538244] MModeLen: 0000 MModeFbrLen: 0000 May 4 14:53:11 matthew kernel: [50306.538268] FrameID: 6203 May 4 14:53:11 matthew kernel: [50306.538286] TxStatus: 0000 May 4 14:53:11 matthew kernel: [50306.538304] MaxNumMpdu: 0000 May 4 14:53:11 matthew kernel: [50306.538322] MaxAggbyte: 0000 May 4 14:53:11 matthew kernel: [50306.538341] MaxAggbyte_fb: 0000 May 4 14:53:11 matthew kernel: [50306.538359] MinByte: 0000 May 4 14:53:11 matthew kernel: [50306.538380] RTS PLCP: 000000000000 RTS Frame: 00000000000000000000000000000000 May 4 14:53:11 matthew kernel: [50306.538415] May 4 14:53:11 matthew kernel: [50306.538417] txpkt (MPDU) Complete May 4 14:53:11 matthew kernel: [50306.538448] FrameID: 6203 TxStatus: 0019 May 4 14:53:11 matthew kernel: [50306.538472] [15:12] 0 frame attempts May 4 14:53:11 matthew kernel: [50306.538492] [11:8] 0 rts attempts May 4 14:53:11 matthew kernel: [50306.538512] [7] 0 PM mode indicated May 4 14:53:11 matthew kernel: [50306.538532] [6] 0 intermediate status May 4 14:53:11 matthew kernel: [50306.538552] [5] 0 AMPDU May 4 14:53:11 matthew kernel: [50306.538572] [4:2] 6 Frame Suppressed Reason (Underflow) May 4 14:53:11 matthew kernel: [50306.538582] [1] 0 acked May 4 14:53:11 matthew kernel: [50306.538582] LastTxTime: 0000 Seq: 0000 PHYTxStatus: 0020 RxAckRSSI: 00ff RxAckSQ: 00ff Der NIC ist ein 25: PCI 900.0: 0200 Ethernet controller [Created at pci.318] Unique ID: rBUF.cc6CWiljGG4 Parent ID: hoOk.s8Sri3BVov8 SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:09:00.0 SysFS BusID: 0000:09:00.0 Hardware Class: network Model: "Marvell 88E8040 PCI-E Fast Ethernet Controller" Vendor: pci 0x11ab "Marvell Technology Group Ltd." Device: pci 0x4354 "88E8040 PCI-E Fast Ethernet Controller" SubVendor: pci 0x144d "Samsung Electronics Co Ltd" SubDevice: pci 0xc08c Driver: "sky2" Driver Modules: "sky2" Device File: eth0 Memory Range: 0xf0200000-0xf0203fff (rw,non-prefetchable) I/O Ports: 0x2000-0x2fff (rw) IRQ: 42 (6247852 events) HW Address: e8:11:32:14:2b:ad Link detected: yes Module Alias: "pci:v000011ABd00004354sv0000144Dsd0000C08Cbc02sc00i00" Driver Info #0: Driver Status: sky2 is active Driver Activation Cmd: "modprobe sky2" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #13 (PCI bridge) Danke im Voraus Martin -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org