man pppd sagt zu Signal 15 15 The link was terminated because the peer is not responding to echo requests. Was bedeutet das? Ist das ein Fehler? Nachts wird immer ein crob job wegen mail abholen ausgeführt und der spukt verkürzt folgendes aus. Der Mailjob scheint aber immer zu klappen. also was bedeutet signal 15 in verständlichen Worten? Gruß Janning Serial connection established. Using interface ppp0 Connect: ppp0 <--> /dev/modem sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2352c7df> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x1 < 00 04 00 00> <mru 1524> <asyncmap 0xa0000> <auth pap> <pcomp> [...] Cannot determine ethernet address for proxy ARP local IP address 134.99.138.12 remote IP address 195.158.131.195 Script /etc/ppp/ip-up started (pid 16499) sent [LCP EchoReq id=0x1 magic=0x2352c7df] rcvd [LCP EchoRep id=0x1 magic=0x0] [...] sent [LCP EchoReq id=0x18 magic=0x2352c7df] rcvd [LCP EchoRep id=0x18 magic=0x0] Terminating on signal 15. ^^^^^^^^^^^^^^^^^^^^^^^^^ sent [LCP TermReq id=0x2 "User request"] Script /etc/ppp/ip-up finished (pid 16499), status = 0x0 Script /etc/ppp/ip-down started (pid 17000) rcvd [LCP TermAck id=0x2] Connection terminated. Connect time 12.5 minutes. Sent 373696 bytes, received 2177213 bytes. Waiting for 1 child processes... script /etc/ppp/ip-down, pid 17000 Script /etc/ppp/ip-down finished (pid 17000), status = 0x0 --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com