Startskript & Parameter / Asterisk 1.0.9 von SUSE-DVD
Hi, ich probiere gerade, ob die Pakete von der SUSE-DVD bezüglich Asterisk mit 2x HFC-S-PCI-Karten nicht auch reichen (dann halt ohne florz-patch). Dabei habe ich ein Problem beim starten des zaptel/zaphfc-Treibers. Wie kann ich dem Startskript (/etc/init.d/zaptel), welches die Variable ZAPTEL_MODULES aus /etc/sysconfig/zaptel benutzt, sagen, dass ich gerne das Modul zaphfc mit dem Parameter modes=2 (für 1. Karte=TE-Mode, 2. Karte=NT-Mode) oder sogar mit den Parametern "modes=2 debug=1" starten möchte??? Gebe ich der Variablen ZAPTEL_MODULES den Wert "zaphfc modes=2", verweigert das Startskript rczaptel (-> also /etc/init.d/zaptel) den Start, weil es natürlich davon ausgeht, dass modes=2 ein zweites Modul ist. Mit quoting habe ich es auch schon versucht, klappt auch nicht, das gibt auch nur Fehler beim starten... Versucht habe ich: ZAPTEL_MODULES="zaphfc modes=2" # sind gleich 2 Module; Fehler ZAPTEL_MODULES="'zaphfc modes=2'" # Fehler ZAPTEL_MODULES="`zaphfc modes=2'" # Fehler; natürlich ZAPTEL_MODULES="`zaphfc modes=2`" # Fehler Also auf dem Weg scheint es wohl nicht zu gehen. Kann mir da irgendjemand auf die Sprünge helfen?? Michael
Hallo, Am Sun, 16 Oct 2005, Michael Ludwig schrieb:
Wie kann ich dem Startskript (/etc/init.d/zaptel), welches die Variable ZAPTEL_MODULES aus /etc/sysconfig/zaptel benutzt, sagen, dass ich gerne das Modul zaphfc mit dem Parameter modes=2 (für 1. Karte=TE-Mode, 2. Karte=NT-Mode) oder sogar mit den Parametern "modes=2 debug=1" starten möchte??? [..] ZAPTEL_MODULES="zaphfc modes=2" # sind gleich 2 Module; Fehler
Schreib options zaphfc modes=2 debug=1 in deine /etc/modprobe.conf.local -dnh -- Cats give a whole new meaning to the phrase "fuzzy logic". -- Seanette Blaylock, in nanae
Hallo Michael, hallo Leute, Am Sonntag, 16. Oktober 2005 09:18 schrieb Michael Ludwig:
Wie kann ich dem Startskript (/etc/init.d/zaptel), welches die Variable ZAPTEL_MODULES aus /etc/sysconfig/zaptel benutzt, sagen, dass ich gerne das Modul zaphfc mit dem Parameter modes=2 (für 1. Karte=TE-Mode, 2. Karte=NT-Mode) oder sogar mit den Parametern "modes=2 debug=1" starten möchte???
Schuss ins Blaue: Trage die gewünschten Modulparameter in /etc/modprobe.local ein ;-) Gruß Christian Boltz -- Auch ich rate von Sandpapier dringend ab! Ein Fehler, der, besonders von Anfängern, immer wieder gemacht wird! Ein Spritzer Pril auf 1/2 Tasse Java Kaffee und damit spülen - das ist IMO wesentlich schonender. [Olaf Andersen erklärt das Putzen einer Festplatte in suse-linux]
participants (3)
-
Christian Boltz
-
David Haller
-
Michael Ludwig