Hallo zusammen,
ich habe gerade eine neue USB2.0-Karte in Betrieb genommen. Der Drucker
tut's, nur der Palm (Zire m150) findet keinen connect.
Früher hatte ich ihn mit dem onbord-USB-Hub (V1.0) verbunden und einen
symlink von /dev/ttyUSB0 nach /dev/pilot gelegt. In Evolution sage ich
ihm er soll /dev/pilot wählen.
Jetzt muß ich wohl den Symlink umlegen, nur wohin?
Ich werde auch nicht schlau aus hwinfo und cat. Warum sind da 5 Hub's
(#03,04,05,06,10)? Ich habe onbord 2 Steckplätze und auf der NEC 5
Steckplätze. Onbord ist kein Gerät angeschlossen. An der NEC ein HP-5150
(#11), der Palm-Zire-m150 (#12) und eine Logitech-Quickcam-Messenger
(#7,8,9).
Vielen Dank,
Kai.
Frage am Rande: Warum ist die Logitech eigentlich drei mal da? Gut - ein
mal für's Bild und einmal für das Micro. Aber drei mal?
------------------
tower:/home/kai # hwinfo --usb
03: USB 101.0: 10a00 Hub
[Created at usb.113]
Unique ID: B3Fu.0mo8K08raZ4
Hardware Class: hub
Model: "Linux 2.4.21-166-athlon ehci_hcd NEC Corporation USB 2.0"
Hotplug: USB
Vendor: "Linux 2.4.21-166-athlon ehci_hcd"
Device: "NEC Corporation USB 2.0"
Revision: "2.04"
Serial ID: "00:0b.2"
USB GUID: 000000000000000fffffffe2
USB Device status: driver active ("hub")
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no, active=unknown
04: USB 201.0: 10a00 Hub
[Created at usb.113]
Unique ID: B3Fu.Yz5OwAk9CA0
Hardware Class: hub
Model: "USB OHCI Root Hub"
Hotplug: USB
Device: "USB OHCI Root Hub"
Serial ID: "ec8d3000"
USB GUID: 0000000000000000ec8d3000
USB Device status: driver active ("hub")
Speed: 1.5 Mbps
Config Status: cfg=no, avail=yes, need=no, active=unknown
05: USB 301.0: 10a00 Hub
[Created at usb.113]
Unique ID: B3Fu.K6e5ru2dJyA
Hardware Class: hub
Model: "USB OHCI Root Hub"
Hotplug: USB
Device: "USB OHCI Root Hub"
Serial ID: "ec8d5000"
USB GUID: 0000000000000000ec8d5000
USB Device status: driver active ("hub")
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no, active=unknown
06: USB 401.0: 10a00 Hub
[Created at usb.113]
Unique ID: B3Fu.6FApl2600P6
Hardware Class: hub
Model: "USB OHCI Root Hub"
Hotplug: USB
Device: "USB OHCI Root Hub"
Serial ID: "ec8d7000"
USB GUID: 0000000000000000ec8d7000
USB Device status: driver active ("hub")
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no, active=unknown
07: USB 402.0: 0000 Unclassified device
[Created at usb.113]
Unique ID: B3Fu.FMm5ConQoA4
Parent ID: B3Fu.6FApl2600P6
Hardware Class: unknown
Model: "Logitech Camera"
Hotplug: USB
Vendor: usb 0x046d "Logitech Inc."
Device: usb 0x08f0
SubDevice: "Camera"
Revision: "1.00"
USB GUID: 046d08f00000000000000000
USB Device status: no driver loaded
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #6 (Hub)
08: USB 402.2: 0000 Unclassified device
[Created at usb.113]
Unique ID: 3Okj.FMm5ConQoA4
Parent ID: B3Fu.6FApl2600P6
Hardware Class: unknown
Model: "Logitech Camera"
Hotplug: USB
Vendor: usb 0x046d "Logitech Inc."
Device: usb 0x08f0
SubDevice: "Camera"
Revision: "1.00"
USB GUID: 046d08f00000000000000000
USB Device status: driver active ("snd-usb-audio")
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #6 (Hub)
09: USB 402.3: 0000 Unclassified device
[Created at usb.113]
Unique ID: wiDZ.FMm5ConQoA4
Parent ID: B3Fu.6FApl2600P6
Hardware Class: unknown
Model: "Logitech Camera"
Hotplug: USB
Vendor: usb 0x046d "Logitech Inc."
Device: usb 0x08f0
SubDevice: "Camera"
Revision: "1.00"
USB GUID: 046d08f00000000000000000
USB Device status: driver active ("snd-usb-audio")
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #6 (Hub)
10: USB 501.0: 10a00 Hub
[Created at usb.113]
Unique ID: B3Fu.uNiWgmQT7B1
Hardware Class: hub
Model: "USB OHCI Root Hub"
Hotplug: USB
Device: "USB OHCI Root Hub"
Serial ID: "ec8d9000"
USB GUID: 0000000000000000ec8d9000
USB Device status: driver active ("hub")
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no, active=unknown
11: USB 502.0: 10900 Printer
[Created at usb.113]
Unique ID: Kns9.3nwbhYYFxDE
Parent ID: B3Fu.uNiWgmQT7B1
Hardware Class: printer
Model: "5151"
Hotplug: USB
Vendor: usb 0x03f0 "HP"
Device: usb 0x6204
SubVendor: "hp"
SubDevice: "deskjet 5100"
Revision: "1.00"
Serial ID: "HU3671Y25FC3"
USB GUID: 03f0620400011e3673225fc3
USB Device status: driver active ("usblp")
Device File: /dev/usb/lp0
Speed: 1.5 Mbps
Config Status: cfg=yes, avail=yes, need=no, active=unknown
Attached to: #10 (Hub)
tower:/home/kai # hwinfo --usb
03: USB 101.0: 10a00 Hub
[Created at usb.113]
Unique ID: B3Fu.0mo8K08raZ4
Hardware Class: hub
Model: "Linux 2.4.21-166-athlon ehci_hcd NEC Corporation USB 2.0"
Hotplug: USB
Vendor: "Linux 2.4.21-166-athlon ehci_hcd"
Device: "NEC Corporation USB 2.0"
Revision: "2.04"
Serial ID: "00:0b.2"
USB GUID: 000000000000000fffffffe2
USB Device status: driver active ("hub")
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no, active=unknown
04: USB 201.0: 10a00 Hub
[Created at usb.113]
Unique ID: B3Fu.Yz5OwAk9CA0
Hardware Class: hub
Model: "USB OHCI Root Hub"
Hotplug: USB
Device: "USB OHCI Root Hub"
Serial ID: "ec8d3000"
USB GUID: 0000000000000000ec8d3000
USB Device status: driver active ("hub")
Speed: 1.5 Mbps
Config Status: cfg=no, avail=yes, need=no, active=unknown
05: USB 301.0: 10a00 Hub
[Created at usb.113]
Unique ID: B3Fu.K6e5ru2dJyA
Hardware Class: hub
Model: "USB OHCI Root Hub"
Hotplug: USB
Device: "USB OHCI Root Hub"
Serial ID: "ec8d5000"
USB GUID: 0000000000000000ec8d5000
USB Device status: driver active ("hub")
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no, active=unknown
06: USB 401.0: 10a00 Hub
[Created at usb.113]
Unique ID: B3Fu.6FApl2600P6
Hardware Class: hub
Model: "USB OHCI Root Hub"
Hotplug: USB
Device: "USB OHCI Root Hub"
Serial ID: "ec8d7000"
USB GUID: 0000000000000000ec8d7000
USB Device status: driver active ("hub")
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no, active=unknown
07: USB 402.0: 0000 Unclassified device
[Created at usb.113]
Unique ID: B3Fu.FMm5ConQoA4
Parent ID: B3Fu.6FApl2600P6
Hardware Class: unknown
Model: "Logitech Camera"
Hotplug: USB
Vendor: usb 0x046d "Logitech Inc."
Device: usb 0x08f0
SubDevice: "Camera"
Revision: "1.00"
USB GUID: 046d08f00000000000000000
USB Device status: no driver loaded
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #6 (Hub)
08: USB 402.2: 0000 Unclassified device
[Created at usb.113]
Unique ID: 3Okj.FMm5ConQoA4
Parent ID: B3Fu.6FApl2600P6
Hardware Class: unknown
Model: "Logitech Camera"
Hotplug: USB
Vendor: usb 0x046d "Logitech Inc."
Device: usb 0x08f0
SubDevice: "Camera"
Revision: "1.00"
USB GUID: 046d08f00000000000000000
USB Device status: driver active ("snd-usb-audio")
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #6 (Hub)
09: USB 402.3: 0000 Unclassified device
[Created at usb.113]
Unique ID: wiDZ.FMm5ConQoA4
Parent ID: B3Fu.6FApl2600P6
Hardware Class: unknown
Model: "Logitech Camera"
Hotplug: USB
Vendor: usb 0x046d "Logitech Inc."
Device: usb 0x08f0
SubDevice: "Camera"
Revision: "1.00"
USB GUID: 046d08f00000000000000000
USB Device status: driver active ("snd-usb-audio")
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #6 (Hub)
10: USB 501.0: 10a00 Hub
[Created at usb.113]
Unique ID: B3Fu.uNiWgmQT7B1
Hardware Class: hub
Model: "USB OHCI Root Hub"
Hotplug: USB
Device: "USB OHCI Root Hub"
Serial ID: "ec8d9000"
USB GUID: 0000000000000000ec8d9000
USB Device status: driver active ("hub")
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no, active=unknown
11: USB 502.0: 10900 Printer
[Created at usb.113]
Unique ID: Kns9.3nwbhYYFxDE
Parent ID: B3Fu.uNiWgmQT7B1
Hardware Class: printer
Model: "5151"
Hotplug: USB
Vendor: usb 0x03f0 "HP"
Device: usb 0x6204
SubVendor: "hp"
SubDevice: "deskjet 5100"
Revision: "1.00"
Serial ID: "HU3671Y25FC3"
USB GUID: 03f0620400011e3673225fc3
USB Device status: driver active ("usblp")
Device File: /dev/usb/lp0
Speed: 1.5 Mbps
Config Status: cfg=yes, avail=yes, need=no, active=unknown
Attached to: #10 (Hub)
12: USB 506.0: 0000 Unclassified device
[Created at usb.113]
Unique ID: B3Fu.rx8J3ROkOq8
Parent ID: B3Fu.uNiWgmQT7B1
Hardware Class: unknown
Model: "Palm Handheld"
Hotplug: USB
Vendor: usb 0x0830 "Palm Computing, Inc."
Device: usb 0x0070
SubVendor: "Palm, Inc."
SubDevice: "Palm Handheld"
Revision: "1.00"
Serial ID: "PalmSN12345678"
USB GUID: 08300070019b57d712345678
USB Device status: driver active ("serial")
Speed: 1.5 Mbps
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #10 (Hub)
------------------
tower:/home/kai # cat /proc/bus/usb/devices
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=ec8d9000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
P: Vendor=0830 ProdID=0070 Rev= 1.00
S: Manufacturer=Palm, Inc.
S: Product=Palm Handheld
S: SerialNumber=PalmSN12345678
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=serial
E: Ad=81(I) Atr=02(Bulk) MxPS= 16 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=05 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=6204 Rev= 1.00
S: Manufacturer=hp
S: Product=deskjet 5100
S: SerialNumber=HU3671Y25FC3
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=ec8d7000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=08f0 Rev= 1.00
S: Product=Camera
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=16ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS=1023 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=16ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00
Driver=snd-usb-audio
I: If#= 2 Alt= 0 #EPs= 1 Cls=01(audio) Sub=02 Prot=00
Driver=snd-usb-audio
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00
Driver=snd-usb-audio
E: Ad=83(I) Atr=01(Isoc) MxPS= 52 Ivl=1ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=ec8d5000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=ec8d3000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 5
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.04
S: Manufacturer=Linux 2.4.21-166-athlon ehci_hcd
S: Product=NEC Corporation USB 2.0
S: SerialNumber=00:0b.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
--
Kai Krämer
participants (1)
-
Kai Krämer