Hallo! Eigentlich ist es erstaunlich, aber bei vielen guten Programmen sind tatsächlich fertig gesetzte Handbücher dabei oder frei erhältlich. Das einzig blöde daran ist, daß wenn man einen Ausdruck macht, man direkt 3 kg Papier mehr auf dem Schreibtisch liegen hat. Man kann das ganze zwar reduzieren indem man 2 Seiten auf 1 Blatt druckt. Aber so richtig nett ist das ganze eigentlich erst im handlichen, doppelseitig bedruckten und gebundenen DIN A5 Format auf 71 % reduziert. Aber wie kommt man dahin? Kann man DIN A5 Kopierpapier kaufen? Oder ist das dann mordsmäßig teuer? Hat jemand von Euch damit Erfahrung? Gruß Peter --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Hallo Peter Am Don, 25 Nov 1999, schrieb Peter Bossy folgendes:
Hallo!
Eigentlich ist es erstaunlich, aber bei vielen guten Programmen sind tatsächlich fertig gesetzte Handbücher dabei oder frei erhältlich. Das einzig blöde daran ist, daß wenn man einen Ausdruck macht, man direkt 3 kg Papier mehr auf dem Schreibtisch liegen hat. Man kann das ganze zwar reduzieren indem man 2 Seiten auf 1 Blatt druckt. Aber so richtig nett ist das ganze eigentlich erst im handlichen, doppelseitig bedruckten und gebundenen DIN A5 Format auf 71 % reduziert. Aber wie kommt man dahin? Kann man DIN A5 Kopierpapier kaufen? Oder ist das dann mordsmäßig teuer?
Hat jemand von Euch damit Erfahrung?
Erfahrung damit habe ich zwar nicht, aber wenn du StarOffice benutzt, kannst du eine Datei im txt Format in SO öffnen und dann ausdrucken mit der Option Prospektdruck. Damit kannst du doppelseitig bedruckte Seiten im Prospektformat drucken. (Wenn dein Drucker nicht doppelseitig drucken kann erst die linken Seiten ausdrucken, Papierstapel herumdrehen und die rechten Seitn ausdrucken) Dann brauchst du nur noch eine Heftmaschine, die in der Mitte von A4 Seiten die Klammern anbringen kann und schon hast du ein handliches Handbuch. Viele Grüße Barbara -- -------------------Dies ist eine Zufallssignatur!------------------ Wir machen Spitzensoftware frei. ------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Erfahrung damit habe ich zwar nicht, aber wenn du StarOffice benutzt, kannst du eine Datei im txt Format in SO öffnen und dann ausdrucken mit der Option Prospektdruck. Damit kannst du doppelseitig bedruckte Seiten im Prospektformat drucken. (Wenn dein Drucker nicht doppelseitig drucken kann erst die linken Seiten ausdrucken, Papierstapel herumdrehen und die rechten Seitn ausdrucken) Dann brauchst du nur noch eine Heftmaschine, die in der Mitte von A4 Seiten die Klammern anbringen kann und schon hast du ein handliches Handbuch.
Hallo Barbara! Danke für den Tip. Aber ich dachte eigentlich mehr an so Dokumentationen im PS-,PDF- oder DVI-Format. Und bis zu 100 Seiten heften? Ich glaube da bricht der härteste Hefter zusammen. Und ist wohl ein wenig steif zum Falten. Nun ja, ich habe heute knapp 300 Seiten auf DIN A4 gedruckt und werde sie wohl morgen mit der klassisch geschmacklosen Ringbindung heften lassen. :-( Gruß Peter PS: Vielleicht lebe ich ja hinterm Mond, aber wer ist Leia Organa? --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Hallo Peter, Am 27.11.1999 um 00:45 Uhr schrieb Peter Bossy:
Nun ja, ich habe heute knapp 300 Seiten auf DIN A4 gedruckt und werde sie wohl morgen mit der klassisch geschmacklosen Ringbindung heften lassen. :-(
falls Du eine platz-/ und kostensparerende Methode suchst um solche Papierstapel zu binden, kann ich Dir folgenden Tipp geben: - Alle Blätter lochen (am besten Vierfach-Lochung) - Kreuselband für Geschenke aus dem einschlägigen Fachhandel besorgen und wie in der Skizze angedeutet durch die Lochungen führen ---------- ---------- ######|##########|###########|##########|###### < Papier ---- ----------- ---- < Band - mit einem breiten Klebeband die ganze Sache abkleben ---- |## ################################# < Papier ------- < Klebeband Das war's ;) Wenn Du nun auch noch für die oberste Seite eine Klarsichtfolie und für die Unterseite ein 140gr Blatt verwendest, hast Du schon ein fast perfekt gebundenes Buch. Falls Du eines Tages ein paar neue Seiten einfügen möchtest, so brauchst Du nur vorsichtig das Band zerschneiden, die neuen Seiten einfügen und die ganze Sache wieder verpacken ;)) BTW. Auf diese Art und Weise binde ich alles ab was mir in die Finger gerät. Mit zu den dicksten Dingern gehört 'Thinking in Java' mit immerhin 726 Seiten (doppelseitig bedruckt, also 363 Blatt Papier). MfG. Jürgen -- Eine Lösung habe ich, aber sie paßt leider nicht zum Problem. /_Registered_Linux-User_#130804_________________________http://counter.li.org_\ \_Linux_Stammtisch_Bremerhaven_________________http://linux.hs-bremerhaven.de_/ --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Hallo Peter Am Sam, 27 Nov 1999, schrieb Peter Bossy folgendes: [mein Vorschlag mit SO Prospektdruck zu machen]
Hallo Barbara!
Danke für den Tip. Aber ich dachte eigentlich mehr an so Dokumentationen im PS-,PDF- oder DVI-Format. Und bis zu 100 Seiten heften? Ich glaube da bricht der härteste Hefter zusammen. Und ist wohl ein wenig steif zum Falten. Nun ja, ich habe heute knapp 300 Seiten auf DIN A4 gedruckt und werde sie wohl morgen mit der klassisch geschmacklosen Ringbindung heften lassen. :-(
Ich wußte ja nicht, daß du dir das SuSe Handbuch ausdrucken wolltest. :-)) Aber so ca. 15 - 20 Din A4 Seiten schaff ich schon mit meinem Hefter. Das reicht allemal für manpages.
Gruß
Peter
dito Barbara
PS: Vielleicht lebe ich ja hinterm Mond, aber wer ist Leia Organa?
Nee, glaub ich nicht. Das ist Prinzessin Leia aus Star Wars. -- -------------------Dies ist eine Zufallssignatur!------------------ Just take the penguin! ------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
On Fri, the 26. of Nov in 1999, Peter Bossy told me:
[...Handbücher haben wollen...DIN-A5...doppelseitig...]
Hi Peter. Hier in der Liste kam 'mal folgendes rum, das man mit den richtigen Suchbegriff auch schnell wieder findet: ;-) man -t befehl | psbook | psnup -2 | psselect -o | lpr dann Papierstapel umdrehen man -t befehl | psbook | psnup -2 | psselect -e -r | lpr Und: Ehre, wem Ehre gebürt! Autor: Melchior, Franz. Der Mann ist gut, der kommt auch in die Suppe. :-) Und bei SuSE ist auch ein Tool (neudeutsch: Tuhl ;-)) dabei, mit dem man alles nach Postscript konvertieren kann. Musste 'mal in den Paketbeschreibungen suchen, da ich nicht mehr weiß, wie dat Dingen hieß. Gruß Carsten -- "Etwas nicht tun zu können, ist kein Grund, es nicht zu tun." Gordon "Alf" Shummway Die weltbeste Suchmaschine: http://meta.rrzn.uni-hannover.de/ Registered Linux User: 106265 --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Hallo Carsten, ich glaube, das ist genau die Art von Tip die ich suchte. Jetzt muß ich nur noch rausfinden, wie die Reihenfolge im Ausdruck sein wird. Merci vielmals, auch an Melchior Franz Gruß Peter
On Fri, the 26. of Nov in 1999, Peter Bossy told me:
[...Handbücher haben wollen...DIN-A5...doppelseitig...]
Hi Peter.
Hier in der Liste kam 'mal folgendes rum, das man mit den richtigen Suchbegriff auch schnell wieder findet: ;-)
man -t befehl | psbook | psnup -2 | psselect -o | lpr dann Papierstapel umdrehen man -t befehl | psbook | psnup -2 | psselect -e -r | lpr
Und: Ehre, wem Ehre gebürt! Autor: Melchior, Franz. Der Mann ist gut, der kommt auch in die Suppe. :-)
Und bei SuSE ist auch ein Tool (neudeutsch: Tuhl ;-)) dabei, mit dem man alles nach Postscript konvertieren kann. Musste 'mal in den Paketbeschreibungen suchen, da ich nicht mehr weiß, wie dat Dingen hieß.
--------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Peter Bossy wrote:
Man kann das ganze zwar reduzieren indem man 2 Seiten auf 1 Blatt druckt. Aber so richtig nett ist das ganze eigentlich erst im handlichen, doppelseitig bedruckten und gebundenen DIN A5 Format auf 71 % reduziert. Aber wie kommt man dahin?
Kann man DIN A5 Kopierpapier kaufen? Oder ist das dann mordsmäßig teuer?
Nimm einfach A4 Papier und schneid' es mit einer Schere in der Mitte durch. Dauert bei einem 500 Blatt-Paket allerdings eine Weile. Heftpflaster bereithalten! ;-) Wie waer's damit: psbook Handbuch.ps | psnup -2 | psselect -e | lpr ## Papierstapel umdrehen psbook Handbuch.ps | psnup -2 | psselect -o -r | lpr Wird bekanntlich auch gerne mit man-pages praktiziert: man -t irgendeine_manpage | psbook | psnup -2 | ... m. --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
* Melchior FRANZ schrieb am 26.Nov.1999: Hallo Melchior,
Wie waer's damit:
psbook Handbuch.ps | psnup -2 | psselect -e | lpr ## Papierstapel umdrehen psbook Handbuch.ps | psnup -2 | psselect -o -r | lpr
Wird bekanntlich auch gerne mit man-pages praktiziert:
man -t irgendeine_manpage | psbook | psnup -2 | ...
Erst einmal, Klasse Tip. Leider macht mein Drucker mucken. Bei kleineren manpages kein Problem. Aber als ich man bash ausdrucken wollte, kommen auch die ersten 5 Blätter ohne Probleme heraus, dann aber sagt der Drucker "Page Buffer overflow". Wahrscheinlich hat das gar nichts mit dem da oben zu tun, sondern mein Drucker emmuliert den ljet2p doch nicht so perfekt. Wo kann man die Drucker Buffergröße einstellen? Oder was läuft sonst falsch? Ich habe einen OKI OL 400e Danke Bernd -- Was ist quoten? Quoten ist das Zitieren aus einer mail, der man antwortet. Und wie macht man es richtig? Zitate werden mit "> " gekennzeichnet. Nicht mehr als nötig zitieren. Vor den Abschnitten das Zitat, auf das man sich bezieht, mit einer Zeile Abstand oben und unten. |Zufallssignatur 12 --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
On 29-Nov-99 Bernd Brodesser wrote:
Erst einmal, Klasse Tip. Leider macht mein Drucker mucken. Bei kleineren manpages kein Problem. Aber als ich man bash ausdrucken wollte, kommen auch die ersten 5 Blätter ohne Probleme heraus, dann aber sagt der Drucker "Page Buffer overflow".
Wahrscheinlich hat das gar nichts mit dem da oben zu tun, sondern mein Drucker emmuliert den ljet2p doch nicht so perfekt. Wo kann man die Drucker Buffergröße einstellen? Oder was läuft sonst falsch?
Ich habe einen OKI OL 400e
Hmm. Die Fehlermeldung deutet eigentlich darauf hin, daß der Seitenpuffer des Druckers zu klein ist. Wie groß ist denn der RAM des Druckers? Laserdrucker müssen die komplette Seite im Speicher aufbauen, bevor sie drucken können. Gerade bei älteren Geräten wie dem OL 400e (übrigens an sich kein schlechter Drucker) wurde da oft geknappst. Wenn die Seite dann ein bisschen komplexer wird, gibts schnell solche Meldungen. Und mit pnp2up oder ähnlichen Tools wird die Seite halt komplexer als eine einfache Textseite. Da hilft dann nur Auflösung runtersetzen oder Druckerspeicher nachrüsten oder Seite vereinfachen. -- Erhard Schwenk <eschwenk@fto.de> - http://www.fto.de **** Jetzt neu: http://www.akkordeonjugend.de **** --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
Bernd Brodesser wrote:
* Melchior FRANZ schrieb am 26.Nov.1999:
psbook Handbuch.ps | psnup -2 | psselect -e | lpr [...] Leider macht mein Drucker mucken. Bei kleineren manpages kein Problem. Aber als ich man bash ausdrucken wollte, kommen auch die ersten 5 Blätter ohne Probleme heraus, dann aber sagt der Drucker "Page Buffer overflow".
Wahrscheinlich hat das gar nichts mit dem da oben zu tun, sondern mein Drucker emmuliert den ljet2p doch nicht so perfekt. Wo kann man die Drucker Buffergröße einstellen? Oder was läuft sonst falsch?
Oje, da kenn' ich mich auch nicht aus! Auch ich hab' mir auch auf die beschriebene Weise `man bash' ausgedruckt (HP Deskjet 1200C) und es hat ohne Probleme funktioniert. An der Befehlsfolge liegt's also nicht. Hast Du's schon ueber ghostscript probiert? Das hat bei mir =ohne=Aenderung=der=Standardeinstellungen= funktioniert! m. PS: Diese Art man-pages auszudrucken ist uebrigens ein weiteres Argument gegen diese verdammten info-pages. :-/ --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com
participants (7)
-
a8603365@unet.univie.ac.at
-
B.Brodesser@online-club.de
-
ca.becker@gmx.de
-
eschwenk@fto.de
-
Juergen_Schwarting@gmx.de
-
LeiaOrgana@gmx.de
-
peter@bossynet.de