farbiger Druck mit Deskjet 990cxi
hallo Leute, kann mir einer sagen wie ich einen HP-Deskjet 990cxi mit yast oder yast2 konfigurieren muß, damit er auch farbig druckt Gruß Jörg
"Kositza,Jörg"
kann mir einer sagen wie ich einen HP-Deskjet 990cxi mit yast oder yast2 konfigurieren muß, damit er auch farbig druckt
Hmm - meinen HP hat SuSE selbst erkannt und mich dann gefragt, wie ich diesen einrichten möchte. Aber in Sache Qualität der Ausdrucke: Ich verwende immer noch TurboPrint (www.turboprint.de), denn da habe ich nicht nur die Treiber sondern auch noch etwas "drumherum". Mit den besten Grüßen, Konrad Neitzel -- SoftMediaTec GmbH Tel: 0172 / 689 31 45 Fax: 069 / 90 50 99 53
"Kositza, Jörg" wrote:
kann mir einer sagen wie ich einen HP-Deskjet 990cxi mit yast oder yast2 konfigurieren muß, damit er auch farbig druckt
Hallo Jörg! Schau mal in der Hardwaredatenbank nach da ist alles beschrieben. http://hardwaredb.suse.de/secondaryDevice.php?LANG=de_DE&device=20971&typ=easySearch&alterlang=en_UK&arch=1&dist=10&printer=17 Plattform :i386SuSE Linux Version :7.0Treiberoptionen : drivers (using macro `dj990c`): monochrome printing (using `hpdj -sColorMode=mono`) monochrome driver `cdjmono` HP developed monochrome or color driver `DJ9xxVIP` monochrome or color driver `cdj550` color driver `cdj970` duplex mode settings for the driver `cdj970`: no duplex (using `-dDuplex=0`) block duplex (using `-dDuplex=1`) book duplex (using `-dDuplex=2`) color driver `stp` at `300x300` dpi (using `-dImageType=1`) photo driver `stp` at `300x300` dpi (using `-dImageType=2`) color driver `stp` at `600x600` dpi (using `-dImageType=1`) photo driver `stp` at `600x600` dpi (using `-dImageType=2`) Treiberoptionen : resolution: Higher resolutions may not work with all the drivers `300x300` `600x300` `600x600` Unterstützung :please see comment if available Beschreibung :Kein Eintrag Gruß Ronald
participants (3)
-
"Kositza, Jörg"
-
Konrad Neitzel
-
Ronald Bianchin