Hallo, mein SuSe Linux 6.3 mit Kernel 2.2.13 erkennt meine zweite Festplatte nicht. 1. Festplatte mit drei Primären Partitionen und einer erweiterten Partition für Linux ist als Master auf dem 1.IDE Kabel. Die 2. Festplatte mit einer Primären und erweiterten Partition steckt als Slave am 2.IDE-Kabel. Unter Windows 98 und 2000 gibt es keine Probleme aber Linux erkennt die zweite Festplatte nicht oder besser gesagt nur sehr selten?!? Hier ein Auszug aus der Boot-Log.: <4>Linux version 2.2.13 <4>CPU: Intel Pentium II (Deschutes) stepping 02 <4>PIIX4: IDE controller on PCI bus 00 dev 39 <4>PIIX4: not 100% native mode: will probe irqs later <4> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio <4> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio <4>hda: SAMSUNG VA34323A, ATA DISK drive <4>hdb: SAMSUNG CD-ROM SCR-3232 VH102, ATAPI CDROM drive <4>hdc: RICOH CD-R/RW MP7040A, ATAPI CDROM drive ----hier sollte die Zeile "hdd: SAMSUNG ... " stehen !!----- <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>hda: SAMSUNG VA34323A, 4124MB w/478kB Cache, CHS=525/255/63 <4>hdb: ATAPI 32X CD-ROM drive, 128kB Cache <6>Uniform CDROM driver Revision: 2.56 <4>hdc: ATAPI 20X CD-ROM CD-R/RW drive, 2048kB Cache <6>Floppy drive(s): fd0 is 1.44M <4>Partition check: <4> hda: hda1 hda2 hda3 hda4 < hda5 hda6 > ----hier sollte die Zeile "hdd: ....." stehen!!------ weis nicht weiter, bin über jeden Hinweis froh! Vielen Dank Michi
Hallo, Was steht fuer hdd im BIOS? auto? manual? none? Versuch mal hdc und hdd zu tauschen, also die HD als Master jumpern, das CDR als Slave... (ich wuensch dir, dass du an die Jumper kommst, ohne die beiden auszubauen ;) CU David -- Any sufficiently advanced technology is indistinguishable from magic. -- Arthur C. Clarke
participants (2)
-
David Haller
-
Michi