cdrecord -> Error: Drive does not support TAO recording
Hallo, früher hat cdrecord bei mir immer funktioniert (auch der TAO-Mode) ... leider funktioniert plötzlich (evtl. nach einem Update, aber es ist mir nicht aufgefallen seit wann genau) meine Brenner nicht mehr. Kann mir jemand sagen woran das liegt? Ich bin am verzweifeln ... Am Laufwerk sollte es nicht liegen, da es bei beiden Laufwerken das gleiche Problem ist. Und ich halte es für unwahrscheinlich, dass zwei Laufwerke gleichzeitig kaputt gehen. Ich habe aus Verzweiflung schon vom SuSE-Kernel auf Kernel 2.6.10 gewechselt. Leider ohne Erfolg. Ich hoffe es kann mir jemand helfen, ich habe keine Idee mehr woran das liegen könnte ... tia Oli PS: Hier der Output beim Brennversuch (incl. der Laufwerksinformationen): tow@XP2100:/hdisk/maxtor/ISOs> cdrecord dev=ATAPI: -scanbus ZY$�: Operation not permitted. WARNING: Cannot set RR-scheduler ZY$�: Permission denied. WARNING: Cannot set priority using setpriority(). ZY$�: WARNING: This causes a high risk for buffer underruns. Cdrecord-Clone-dvd 2.01a27 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://www.suse.de/feedback Note: The author of cdrecord should not be bothered with problems in this version. scsidev: 'ATAPI:' devname: 'ATAPI' scsibus: -1 target: -1 lun: -1 Use of ATA is preferred over ATAPI. Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. Using libscg version 'schily-0.8'. scsibus0: 0,0,0 0) '_NEC ' 'DV-5700B ' '1.91' Removable CD-ROM 0,1,0 1) 'PHILIPS ' 'CDRW48A ' 'P1.3' Removable CD-ROM 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * scsibus1: 1,0,0 100) 'SONY ' 'DVD RW DW-U10A ' '1.1a' Removable CD-ROM 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * tow@XP2100:/hdisk/maxtor/ISOs> cdrecord dev=ATAPI:0,1,0 -v theISO.iso ZY$�: Operation not permitted. WARNING: Cannot set RR-scheduler ZY$�: Permission denied. WARNING: Cannot set priority using setpriority(). ZY$�: WARNING: This causes a high risk for buffer underruns. cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... Cdrecord-Clone-dvd 2.01a27 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://www.suse.de/feedback Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM cdrecord: No such file or directory. WARNING: Cannot do mlockall(2). cdrecord: WARNING: This causes a high risk for buffer underruns. cdrecord: Warning: not running as root user, fs= option ignored. scsidev: 'ATAPI:0,1,0' devname: 'ATAPI' scsibus: 0 target: 1 lun: 0 Use of ATA is preferred over ATAPI. Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. Using libscg version 'schily-0.8'. SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'PHILIPS ' Identifikation : 'CDRW48A ' Revision : 'P1.3' Device seems to be: Generic mmc CD-RW. Current: 0x0009 Profile: 0x000A Profile: 0x0009 (current) Profile: 0x0008 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: Drive buf size : 1372160 = 1340 KB FIFO size : 4194304 = 4096 KB cdrecord: Drive does not support TAO recording. cdrecord: Illegal write mode for this drive. tow@XP2100:/hdisk/maxtor/ISOs>
Seltsam, nachdem ich meinen SCSI-Bus gescannt habe hat das Laufwerk das Device ATAPI:1,1,0 bekommen und ich kann immerhin als root brennen ... verstehe allerdings nicht warum er nicht gleich das SCSI-Gerät mit erkennt ... Habe den alten Thread gefunden ... liegt es jetzt definitiv am > 2.6.8 Kernel, dass cdrecord nicht mehr funktioniert?? Muss man sich jetzt an growisofs gewöhnen??? Kann man damit auch ISOs brennen (da ist doch mkisofs irgendwie integriert - oder?)? tia Oli Am Mittwoch, 26. Januar 2005 20:55 schrieb Tim Oliver Wagner:
Hallo, früher hat cdrecord bei mir immer funktioniert (auch der TAO-Mode) ... leider funktioniert plötzlich (evtl. nach einem Update, aber es ist mir nicht aufgefallen seit wann genau) meine Brenner nicht mehr. Kann mir jemand sagen woran das liegt? Ich bin am verzweifeln ...
Am Laufwerk sollte es nicht liegen, da es bei beiden Laufwerken das gleiche Problem ist. Und ich halte es für unwahrscheinlich, dass zwei Laufwerke gleichzeitig kaputt gehen.
Ich habe aus Verzweiflung schon vom SuSE-Kernel auf Kernel 2.6.10 gewechselt. Leider ohne Erfolg.
Ich hoffe es kann mir jemand helfen, ich habe keine Idee mehr woran das liegen könnte ...
tia
Oli
PS: Hier der Output beim Brennversuch (incl. der Laufwerksinformationen):
tow@XP2100:/hdisk/maxtor/ISOs> cdrecord dev=ATAPI: -scanbus ZY$�: Operation not permitted. WARNING: Cannot set RR-scheduler ZY$�: Permission denied. WARNING: Cannot set priority using setpriority(). ZY$�: WARNING: This causes a high risk for buffer underruns. Cdrecord-Clone-dvd 2.01a27 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://www.suse.de/feedback Note: The author of cdrecord should not be bothered with problems in this version. scsidev: 'ATAPI:' devname: 'ATAPI' scsibus: -1 target: -1 lun: -1 Use of ATA is preferred over ATAPI. Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. Using libscg version 'schily-0.8'. scsibus0: 0,0,0 0) '_NEC ' 'DV-5700B ' '1.91' Removable CD-ROM 0,1,0 1) 'PHILIPS ' 'CDRW48A ' 'P1.3' Removable CD-ROM 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * scsibus1: 1,0,0 100) 'SONY ' 'DVD RW DW-U10A ' '1.1a' Removable CD-ROM 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * tow@XP2100:/hdisk/maxtor/ISOs> cdrecord dev=ATAPI:0,1,0 -v theISO.iso ZY$�: Operation not permitted. WARNING: Cannot set RR-scheduler ZY$�: Permission denied. WARNING: Cannot set priority using setpriority(). ZY$�: WARNING: This causes a high risk for buffer underruns. cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... Cdrecord-Clone-dvd 2.01a27 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://www.suse.de/feedback Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM cdrecord: No such file or directory. WARNING: Cannot do mlockall(2). cdrecord: WARNING: This causes a high risk for buffer underruns. cdrecord: Warning: not running as root user, fs= option ignored. scsidev: 'ATAPI:0,1,0' devname: 'ATAPI' scsibus: 0 target: 1 lun: 0 Use of ATA is preferred over ATAPI. Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. Using libscg version 'schily-0.8'. SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'PHILIPS ' Identifikation : 'CDRW48A ' Revision : 'P1.3' Device seems to be: Generic mmc CD-RW. Current: 0x0009 Profile: 0x000A Profile: 0x0009 (current) Profile: 0x0008 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: Drive buf size : 1372160 = 1340 KB FIFO size : 4194304 = 4096 KB cdrecord: Drive does not support TAO recording. cdrecord: Illegal write mode for this drive. tow@XP2100:/hdisk/maxtor/ISOs>
Am Mittwoch, 26. Januar 2005 21:35 schrieb Tim Oliver Wagner: bitte kein TOFU :) ansonsten:
Kann man damit auch ISOs brennen (da ist doch mkisofs irgendwie integriert - oder?)?
--> man growisofs To use growisofs to write a pre-mastered ISO-image to a DVD: growisofs -dvd-compat -Z /dev/dvd=image.iso where image.iso represents an arbitrary object in the filesystem, such as file, named pipe or device entry. Nothing is growing here and command name is not intuitive in this context. Gruss Andreas
Am Mittwoch, 26. Januar 2005 22:20 schrieb Andreas Loesch:
Kann man damit auch ISOs brennen (da ist doch mkisofs irgendwie integriert - oder?)?
To use growisofs to write a pre-mastered ISO-image to a DVD:
growisofs -dvd-compat -Z /dev/dvd=image.iso
Hmmm, habe mich wohl etwas missverständlich ausgedrückt - sorry. Es ging eigentlich nicht um ein ISO an sich zu brennen, sondern um ein CD-ISO zu brennen. Dies funktioniert so wie oben beschrieben nicht ... Ja genau, eine DVD kann man so von einem ISO erstellen. Aber ich habe hier einige CD-ISOs ... wie bekomme ich diese auf cd, wenn cdrecord nicht mehr funktioniert??? Geht das mit growisofs?? Ich finde cdrdao sehr umständlich zu bedienen ... Wenn man eine Audio-CD aus wav-Files erstellen möchte ... geht das auch mit growisofs? Also meine Fragen beziehen sich auf hier auf die Erstellung CD-Roms. tia Oli
Am Mittwoch, 26. Januar 2005 22:49 schrieb Tim Oliver Wagner:
Am Mittwoch, 26. Januar 2005 22:20 schrieb Andreas Loesch:
Kann man damit auch ISOs brennen (da ist doch mkisofs irgendwie integriert - oder?)?
To use growisofs to write a pre-mastered ISO-image to a DVD:
growisofs -dvd-compat -Z /dev/dvd=image.iso
Hmmm, habe mich wohl etwas missverständlich ausgedrückt - sorry. Es ging eigentlich nicht um ein ISO an sich zu brennen, sondern um ein CD-ISO zu brennen.
Dies funktioniert so wie oben beschrieben nicht ...
Ja genau, eine DVD kann man so von einem ISO erstellen. Aber ich habe hier einige CD-ISOs ... wie bekomme ich diese auf cd, wenn cdrecord nicht mehr funktioniert??? Geht das mit growisofs?? Ich finde cdrdao sehr umständlich zu bedienen ...
Warum umständlich? cdrdao write --device=ATAPI:1,1,0 --speed=24 image.iso Mfg, Thomas
participants (3)
-
Andreas Loesch
-
Thomas Gräber
-
Tim Oliver Wagner