![](https://seccdn.libravatar.org/avatar/35759cfde8731751fba0734baa689a5f.jpg?s=120&d=mm&r=g)
Hallo Leute, Ich bekomme nach einem Rechnerneustart plötzlich immer beim Starten von Postfix folgende Meldung (verbose): ========================Ausschnitt===================================== Jun 2 11:55:04 warenmail postfix/master[714]: arg[9]: ${sender} Jun 2 11:55:04 warenmail postfix/master[714]: arg[10]: ${recipient} Jun 2 11:55:04 warenmail postfix/master[714]: avail_proc: 0 Jun 2 11:55:04 warenmail postfix/master[714]: total_proc: 0 Jun 2 11:55:04 warenmail postfix/master[714]: throttle_delay: 60 Jun 2 11:55:04 warenmail postfix/master[714]: status_fd -1 -1 Jun 2 11:55:04 warenmail postfix/master[714]: children: 0x0 Jun 2 11:55:04 warenmail postfix/master[714]: next: 0x0 Jun 2 11:55:04 warenmail postfix/master[714]: ====end service entry Jun 2 11:55:04 warenmail postfix/master[714]: set_eugid: euid 102 egid 101 Jun 2 11:55:04 warenmail postfix/master[714]: master_avail_listen: avail 0 total 0 max 4 Jun 2 11:55:04 warenmail postfix/master[714]: master_avail_listen: enable events private/vscan Jun 2 11:55:04 warenmail postfix/master[714]: master_status_init: private/vscan Jun 2 11:55:24 warenmail postfix/master[714]: panic: mymalloc: requested length 0 ========================Ausschnitt===================================== Woran kann das liegen? Google schweigt sich darüber aus... Best regards, Marc Mc Guinness -- Internet: http://www.computernetworking.de Internet: http://www.teamberatung.org Internet: http://www.mcguinness.de PGP Public Key Block: http://mcguinness.psychology4u.de/public.txt
![](https://seccdn.libravatar.org/avatar/82f661ebeb89ec16d1377f8297265749.jpg?s=120&d=mm&r=g)
Hallo! On Mon, Jun 02, 2003 at 12:21:20 +0200, Marc Mc Guinness wrote:
Ich bekomme nach einem Rechnerneustart plötzlich immer beim Starten von Postfix folgende Meldung (verbose):
========================Ausschnitt===================================== Jun 2 11:55:04 warenmail postfix/master[714]: arg[9]: ${sender} Jun 2 11:55:04 warenmail postfix/master[714]: arg[10]: ${recipient} Jun 2 11:55:04 warenmail postfix/master[714]: avail_proc: 0 Jun 2 11:55:04 warenmail postfix/master[714]: total_proc: 0 Jun 2 11:55:04 warenmail postfix/master[714]: throttle_delay: 60 Jun 2 11:55:04 warenmail postfix/master[714]: status_fd -1 -1 Jun 2 11:55:04 warenmail postfix/master[714]: children: 0x0 Jun 2 11:55:04 warenmail postfix/master[714]: next: 0x0 Jun 2 11:55:04 warenmail postfix/master[714]: ====end service entry Jun 2 11:55:04 warenmail postfix/master[714]: set_eugid: euid 102 egid 101 Jun 2 11:55:04 warenmail postfix/master[714]: master_avail_listen: avail 0 total 0 max 4 Jun 2 11:55:04 warenmail postfix/master[714]: master_avail_listen: enable events private/vscan Jun 2 11:55:04 warenmail postfix/master[714]: master_status_init: private/vscan Jun 2 11:55:24 warenmail postfix/master[714]: panic: mymalloc: requested length 0 ========================Ausschnitt=====================================
Woran kann das liegen? Google schweigt sich darüber aus...
Poste mal bitte deine main.cf und master.cf. Evtl. ist was mit dem Contentfiltereintrag für vscan faul.
Marc Mc Guinness
Ciao, Schöppi -- Christian Schoepplein | Beste Rockband der Welt: http://www.lily-rockt.de mail@schoeppi.net | Linux fuer Blinde: http://www.blinux.suse.de
![](https://seccdn.libravatar.org/avatar/35759cfde8731751fba0734baa689a5f.jpg?s=120&d=mm&r=g)
Hallo Christian, Christian Schoepplein schrieb:
Hallo!
On Mon, Jun 02, 2003 at 12:21:20 +0200, Marc Mc Guinness wrote:
Ich bekomme nach einem Rechnerneustart plötzlich immer beim Starten von Postfix folgende Meldung (verbose):
========================Ausschnitt===================================== Jun 2 11:55:04 warenmail postfix/master[714]: arg[9]: ${sender} Jun 2 11:55:04 warenmail postfix/master[714]: arg[10]: ${recipient} Jun 2 11:55:04 warenmail postfix/master[714]: avail_proc: 0 Jun 2 11:55:04 warenmail postfix/master[714]: total_proc: 0 Jun 2 11:55:04 warenmail postfix/master[714]: throttle_delay: 60 Jun 2 11:55:04 warenmail postfix/master[714]: status_fd -1 -1 Jun 2 11:55:04 warenmail postfix/master[714]: children: 0x0 Jun 2 11:55:04 warenmail postfix/master[714]: next: 0x0 Jun 2 11:55:04 warenmail postfix/master[714]: ====end service entry Jun 2 11:55:04 warenmail postfix/master[714]: set_eugid: euid 102 egid 101 Jun 2 11:55:04 warenmail postfix/master[714]: master_avail_listen: avail 0 total 0 max 4 Jun 2 11:55:04 warenmail postfix/master[714]: master_avail_listen: enable events private/vscan Jun 2 11:55:04 warenmail postfix/master[714]: master_status_init: private/vscan Jun 2 11:55:24 warenmail postfix/master[714]: panic: mymalloc: requested length 0 ========================Ausschnitt=====================================
Woran kann das liegen? Google schweigt sich darüber aus...
Poste mal bitte deine main.cf und master.cf. Evtl. ist was mit dem Contentfiltereintrag für vscan faul.
Vielen Dank für Deine Antwort. Hier die main.cf: ============================main.cf====================================== command_directory = /usr/sbin daemon_directory = /usr/lib/postfix program_directory = /usr/lib/postfix myhostname = warenmail.klinikamsee.de setgid_group = postdrop biff = no alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = warenmail, mail, localhost.localdomain, localhost, warenmail.klinikamsee.de, klinikamsee.de, mail.klinikamsee.de mynetworks = 192.168.1.0/24, 127.0.0.0/8 mailbox_size_limit = 0 recipient_delimiter = + message_size_limit = 20480000 default_process_limit = 100 mail_name = mail delay_warning_time = 2 mail_version = 3.3.3 daemon_timeout = 1800s masquerade_domains = klinikamsee.de relay_domains = 192.168.1.0/24 smtp_helo_timeout = 180s smtp_mail_timeout = 180s smtp_quit_timeout = 180s smtp_rcpt_timeout = 180s local_destination_concurrency_limit = 20 minimal_backoff_time = 600s maximal_queue_lifetime = 1d maximal_backoff_time = 1000s queue_run_delay = 600s content_filter = vscan: soft_bounce = yes mailbox_transport = cyrus mailbox_command = /usr/bin/procmail -t -a $EXTENSION ============================/main.cf====================================== ============================master.cf====================================== smtp inet n - y - - smtpd #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - - 300 1 qmgr #qmgr fifo n - - 300 1 nqmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce flush unix n - - 1000? 0 flush smtp unix - - y - - smtp showq unix n - - - - showq error unix - - - - - error local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp cyrus unix - n n - - pipe flags=R user=cyrus argv=/usr/sbin/cyrdeliver -e -m ${extension} ${user} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -d -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} vscan unix - n n - 4 pipe flags=q user=amavis argv=/usr/sbin/amavis ${sender} ${recipient} localhost:10025 inet n - n - - smtpd -o content_filter= ============================/master.cf====================================== Vielen Dank im Voraus für Eure Hilfe! Marc -- Internet: http://www.computernetworking.de Internet: http://www.teamberatung.org Internet: http://www.mcguinness.de PGP Public Key Block: http://mcguinness.psychology4u.de/public.txt
![](https://seccdn.libravatar.org/avatar/35759cfde8731751fba0734baa689a5f.jpg?s=120&d=mm&r=g)
Hallo! Ich kann die Fehlerquelle jetzt schon sehr weit einschränken. In der master.cf scheint folgender Eintrag fehlerhaft zu sein: localhost:10025 inet n - n - - smtpd -o content_filter= Ich habe das mit kommentieren/auskommentieren herausgefunden. Postfix läuft wenn ich diese Zeile deaktiviere. Leider brauche ich diese Zeile doch für Amavis, oder? Gruss, Marc Marc Mc Guinness schrieb:
Hallo Christian,
Christian Schoepplein schrieb:
Hallo!
On Mon, Jun 02, 2003 at 12:21:20 +0200, Marc Mc Guinness wrote:
Ich bekomme nach einem Rechnerneustart plötzlich immer beim Starten von Postfix folgende Meldung (verbose):
========================Ausschnitt===================================== Jun 2 11:55:04 warenmail postfix/master[714]: arg[9]: ${sender} Jun 2 11:55:04 warenmail postfix/master[714]: arg[10]: ${recipient} Jun 2 11:55:04 warenmail postfix/master[714]: avail_proc: 0 Jun 2 11:55:04 warenmail postfix/master[714]: total_proc: 0 Jun 2 11:55:04 warenmail postfix/master[714]: throttle_delay: 60 Jun 2 11:55:04 warenmail postfix/master[714]: status_fd -1 -1 Jun 2 11:55:04 warenmail postfix/master[714]: children: 0x0 Jun 2 11:55:04 warenmail postfix/master[714]: next: 0x0 Jun 2 11:55:04 warenmail postfix/master[714]: ====end service entry Jun 2 11:55:04 warenmail postfix/master[714]: set_eugid: euid 102 egid 101 Jun 2 11:55:04 warenmail postfix/master[714]: master_avail_listen: avail 0 total 0 max 4 Jun 2 11:55:04 warenmail postfix/master[714]: master_avail_listen: enable events private/vscan Jun 2 11:55:04 warenmail postfix/master[714]: master_status_init: private/vscan Jun 2 11:55:24 warenmail postfix/master[714]: panic: mymalloc: requested length 0 ========================Ausschnitt=====================================
Woran kann das liegen? Google schweigt sich darüber aus...
Poste mal bitte deine main.cf und master.cf. Evtl. ist was mit dem Contentfiltereintrag für vscan faul.
Vielen Dank für Deine Antwort. Hier die main.cf:
============================main.cf====================================== command_directory = /usr/sbin daemon_directory = /usr/lib/postfix program_directory = /usr/lib/postfix myhostname = warenmail.klinikamsee.de
setgid_group = postdrop biff = no
alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = warenmail, mail, localhost.localdomain, localhost, warenmail.klinikamsee.de, klinikamsee.de, mail.klinikamsee.de mynetworks = 192.168.1.0/24, 127.0.0.0/8 mailbox_size_limit = 0 recipient_delimiter = + message_size_limit = 20480000 default_process_limit = 100 mail_name = mail delay_warning_time = 2 mail_version = 3.3.3 daemon_timeout = 1800s masquerade_domains = klinikamsee.de relay_domains = 192.168.1.0/24 smtp_helo_timeout = 180s smtp_mail_timeout = 180s smtp_quit_timeout = 180s smtp_rcpt_timeout = 180s local_destination_concurrency_limit = 20 minimal_backoff_time = 600s maximal_queue_lifetime = 1d maximal_backoff_time = 1000s queue_run_delay = 600s content_filter = vscan: soft_bounce = yes mailbox_transport = cyrus mailbox_command = /usr/bin/procmail -t -a $EXTENSION ============================/main.cf======================================
============================master.cf====================================== smtp inet n - y - - smtpd #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - - 300 1 qmgr #qmgr fifo n - - 300 1 nqmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce flush unix n - - 1000? 0 flush smtp unix - - y - - smtp showq unix n - - - - showq error unix - - - - - error local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp
cyrus unix - n n - - pipe flags=R user=cyrus argv=/usr/sbin/cyrdeliver -e -m ${extension} ${user} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -d -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} vscan unix - n n - 4 pipe flags=q user=amavis argv=/usr/sbin/amavis ${sender} ${recipient} localhost:10025 inet n - n - - smtpd -o content_filter= ============================/master.cf======================================
Vielen Dank im Voraus für Eure Hilfe!
Marc
-- Internet: http://www.computernetworking.de Internet: http://www.teamberatung.org Internet: http://www.mcguinness.de PGP Public Key Block: http://mcguinness.psychology4u.de/public.txt
![](https://seccdn.libravatar.org/avatar/657ed98e7e7449a0700fdae0b22b9c58.jpg?s=120&d=mm&r=g)
Hi Marc, ich habe in meiner main.cf folgendes stehen: content_filter = smtp-amavis:[127.0.0.1]:10024 und in der master.cf: vscan unix - n n - 10 pipe user=vscan argv=/usr/sbin/amavis ${sender} ${recipient} # for amavisd-new smtp-amavis unix - - n - 2 smtp -o smtp_data_done_timeout=1200 -o disable_dns_lookups=yes 127.0.0.1:10025 inet n - n - - smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes Gruß Sören
![](https://seccdn.libravatar.org/avatar/35759cfde8731751fba0734baa689a5f.jpg?s=120&d=mm&r=g)
Hallo liebe Helfer, Sören Mindorf schrieb:
Hi Marc,
ich habe in meiner main.cf folgendes stehen:
content_filter = smtp-amavis:[127.0.0.1]:10024
und in der master.cf:
vscan unix - n n - 10 pipe user=vscan argv=/usr/sbin/amavis ${sender} ${recipient}
# for amavisd-new
smtp-amavis unix - - n - 2 smtp -o smtp_data_done_timeout=1200 -o disable_dns_lookups=yes
127.0.0.1:10025 inet n - n - - smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes
Yes! Diesen letzten Eintrag (127.0.0.1:10025 ..) habe ich so übernommen und es funktioniert! Vielen Dank für Eure Hilfe. Marc -- Internet: http://www.computernetworking.de Internet: http://www.teamberatung.org Internet: http://www.mcguinness.de PGP Public Key Block: http://mcguinness.psychology4u.de/public.txt
![](https://seccdn.libravatar.org/avatar/bfc3956e3fc6763d1bb88c3de2ecc09b.jpg?s=120&d=mm&r=g)
Am Montag, 2. Juni 2003 16:02 schrieb Marc Mc Guinness:
Yes! Diesen letzten Eintrag (127.0.0.1:10025 ..) habe ich so übernommen und es funktioniert!
Dann hätte auch Deine ursprüngliche Konfiguration noch funktioniert, wenn Du nur 'localhost' duch '127.0.0.1' ersetzt hättest. Fragt sich nur, was sich in der Netzwerkkonfiguration oder am Postfix- / Amavis-Gespann geändert hat. Was unterscheidet 'localhost' eigentlich von der Angabe der IP '127.0.0.1'? Irgend einen Unterschied muss es ja geben, oder wie kommt sonst so etwas zustande? | hrw@tuxel:~> telnet localhost smtp | Trying ::1... | telnet: connect to address ::1: Connection refused | Trying 127.0.0.1... | Connected to localhost. | Escape character is '^]'. | 220 mail.hr-wagner.de ESMTP Postfix (2.0.6) | quit | 221 Bye | Connection closed by foreign host. | hrw@tuxel:~> telnet 127.0.0.1 smtp | Trying 127.0.0.1... | Connected to 127.0.0.1. | Escape character is '^]'. | 220 mail.hr-wagner.de ESMTP Postfix (2.0.6) | quit | 221 Bye | Connection closed by foreign host. | hrw@tuxel:~> Robert
![](https://seccdn.libravatar.org/avatar/440955ab796fb403fba608d0df23b654.jpg?s=120&d=mm&r=g)
Hallo Hans-Robert, hallo Leute, Am Montag, 2. Juni 2003 18:30 schrieb Hans-Robert Wagner:
Was unterscheidet 'localhost' eigentlich von der Angabe der IP '127.0.0.1'? Irgend einen Unterschied muss es ja geben, oder wie kommt sonst so etwas zustande?
| hrw@tuxel:~> telnet localhost smtp | Trying ::1... | telnet: connect to address ::1: Connection refused
Das ist die IPv6-Variante des localhost...
| Trying 127.0.0.1... | Connected to localhost.
... und das die IPv4-Variante ;-)
| hrw@tuxel:~> telnet 127.0.0.1 smtp
Das ist auch nochmal die IPv4-Variante, klar. Das folgende gilt nur, wenn Du keinen internen Nameserver hast: Wenn Du IPv6 nicht brauchst, reicht es wohl, in der /etc/hosts die entsprechenden Zeilen auszukommentieren, insbesondere die Zeile # ::1 localhost ipv6-localhost ipv6-loopback Übrig bleiben sollte natürlich die Zeile 127.0.0.1 localhost damit "localhost" richtig auf die IPv4-Adresse 127.0.0.1 aufgelöst werden kann. Gruß Christian Boltz -- ####################### Fontlinge Developer ####################### ### Fontlinge - Schriftenverwaltung für Linux ### ### Fontlinge 2.0 jetzt downloaden! #### http://www.gesindel.de ### ###################################################################
![](https://seccdn.libravatar.org/avatar/bfc3956e3fc6763d1bb88c3de2ecc09b.jpg?s=120&d=mm&r=g)
Am Donnerstag, 5. Juni 2003 00:16 schrieb Christian Boltz:
Hallo Hans-Robert, hallo Leute,
| hrw@tuxel:~> telnet localhost smtp | Trying ::1... | telnet: connect to address ::1: Connection refused
Das ist die IPv6-Variante des localhost...
Argh, ich habe noch nicht ausreichend mit IPv6 beschäftigt und daher den Wert auch optisch nicht wiedererkannt.
Das folgende gilt nur, wenn Du keinen internen Nameserver hast: Wenn Du IPv6 nicht brauchst, reicht es wohl, in der /etc/hosts die entsprechenden Zeilen auszukommentieren, insbesondere die Zeile # ::1 localhost ipv6-localhost ipv6-loopback Übrig bleiben sollte natürlich die Zeile 127.0.0.1 localhost damit "localhost" richtig auf die IPv4-Adresse 127.0.0.1 aufgelöst werden kann.
Alles klar, done. Danke Dir. Robert
![](https://seccdn.libravatar.org/avatar/82f661ebeb89ec16d1377f8297265749.jpg?s=120&d=mm&r=g)
Hi Marc! On Mon, Jun 02, 2003 at 01:35:16 +0200, Marc Mc Guinness wrote:
Christian Schoepplein schrieb:
On Mon, Jun 02, 2003 at 12:21:20 +0200, Marc Mc Guinness wrote:
Ich bekomme nach einem Rechnerneustart plötzlich immer beim Starten von Postfix folgende Meldung (verbose):
========================Ausschnitt===================================== Jun 2 11:55:04 warenmail postfix/master[714]: arg[9]: ${sender} Jun 2 11:55:04 warenmail postfix/master[714]: arg[10]: ${recipient} Jun 2 11:55:04 warenmail postfix/master[714]: avail_proc: 0 Jun 2 11:55:04 warenmail postfix/master[714]: total_proc: 0 Jun 2 11:55:04 warenmail postfix/master[714]: throttle_delay: 60 Jun 2 11:55:04 warenmail postfix/master[714]: status_fd -1 -1 Jun 2 11:55:04 warenmail postfix/master[714]: children: 0x0 Jun 2 11:55:04 warenmail postfix/master[714]: next: 0x0 Jun 2 11:55:04 warenmail postfix/master[714]: ====end service entry Jun 2 11:55:04 warenmail postfix/master[714]: set_eugid: euid 102 egid 101 Jun 2 11:55:04 warenmail postfix/master[714]: master_avail_listen: avail 0 total 0 max 4 Jun 2 11:55:04 warenmail postfix/master[714]: master_avail_listen: enable events private/vscan Jun 2 11:55:04 warenmail postfix/master[714]: master_status_init: private/vscan Jun 2 11:55:24 warenmail postfix/master[714]: panic: mymalloc: requested length 0 ========================Ausschnitt=====================================
Woran kann das liegen? Google schweigt sich darüber aus...
Poste mal bitte deine main.cf und master.cf. Evtl. ist was mit dem Contentfiltereintrag für vscan faul.
Vielen Dank für Deine Antwort. Hier die main.cf:
============================main.cf======================================
[...]
content_filter = vscan: ^^^^^^^^^^^^^^^^^^^^^^^^
Falls es so ist, dass du amavisd gerne in dein Mailsystem integrieren möchtest, schmeiß mal den Eintrag aus der main.cf raus, AFAIK geht das so nicht ;-).
============================master.cf====================================== smtp inet n - y - - smtpd
Hier fügst du den Contentfilter für vscan an: smtp inet n - n - - smtpd -o content_filter=vscan:
vscan unix - n n - 4 pipe flags=q user=amavis argv=/usr/sbin/amavis ${sender} ${recipient}
Das sieht bei mir folgendermaßen aus, ich verwende amavisd: vscan unix - n n - 10 pipe user=vscan argv=/usr/sbin/amavis ${sender} ${recipient} Sieh doch auch mal in der sdb nach, suche dort nach amavis. Da findeet man 2 Artikel die die Einrichtung des Virenscanners auf dem Emailserver 3 bszw. auf dem SLOX erklären, mit denen solltest du auch weiter kommen.
Marc
Hth, Schöpp -- Christian Schoepplein | Beste Rockband der Welt: http://www.lily-rockt.de mail@schoeppi.net | Linux fuer Blinde: http://www.blinux.suse.de
participants (5)
-
Christian Boltz
-
Christian Schoepplein
-
Hans-Robert Wagner
-
Marc Mc Guinness
-
Sören Mindorf