SCSI-Problem: LUN larger than currently supported
Hallo, ich betreibe ein EasyRaid X12P mit SCSI160-Interface an einem LSI-Logic 53C1030 Dual-Channel SCSI320 Controller unter SuSE 9.1. Auf dem Raid-System sind zwei Partitionen mit je 465 GB eingerichtet. Unter SuSE 8.2 hat das prima funktioniert. Mit SuSE 9.0 oder 9.1 wird jedoch die zweite Partition (LUN1 ) nicht richtig erkannt. Beim scannen der LUNs werden scheibar unsinnige Werte gelesen. Aus einem Posting von linuxhardware.de habe ich erfahren, daß das Problem auch mit einem Adaptec-Controller auftritt. Hier ein Auszug aus boot.msg (mit Kernel 2.6.8-rc2): <4>osst :I: $Id: osst.c,v 1.70 2003/12/23 14:22:12 wriede Exp $ <6>Fusion MPT base driver 3.01.09 <6>Copyright (c) 1999-2004 LSI Logic Corporation <6>ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 26 (level, low) -> IRQ 26 <6>mptbase: Initiating ioc0 bringup <6>ioc0: 53C1030: Capabilities={Initiator} <6>ACPI: PCI interrupt 0000:03:08.1[B] -> GSI 27 (level, low) -> IRQ 27 <6>mptbase: Initiating ioc1 bringup <6>ioc1: 53C1030: Capabilities={Initiator} <6>Fusion MPT SCSI Host driver 3.01.09 <6>scsi0 : ioc0: LSI53C1030, FwRev=01013d00h, Ports=1, MaxQ=255, IRQ=26 <6>scsi1 : ioc1: LSI53C1030, FwRev=01013d00h, Ports=1, MaxQ=255, IRQ=27 <5> Vendor: easyRAID Model: 12P Rev: 0001 <5> Type: Direct-Access ANSI SCSI revision: 03 <4>scsi: host 1 channel 0 id 0 lun 0x6500737952414944 has a LUN larger than currently supported. <4>scsi: host 1 channel 0 id 0 lun 0x2001325020202020 has a LUN larger than currently supported. <4>scsi: host 1 channel 0 id 0 lun 0x2002202020202020 has a LUN larger than currently supported. <4>scsi: host 1 channel 0 id 0 lun808529923 has a LUN larger than allowed by the host adapter <4>scsi: host 1 channel 0 id 0 lun3078 has a LUN larger than allowed by the host adapter <6>mice: PS/2 mouse device common for all mice Danke, Michael
Am Freitag Juli 30 2004 12:44 schrieb Michael Perezowsky:
Hallo, ich betreibe ein EasyRaid X12P mit SCSI160-Interface an einem LSI-Logic 53C1030 Dual-Channel SCSI320 Controller unter SuSE 9.1. Auf dem Raid-System sind zwei Partitionen mit je 465 GB eingerichtet.
Unter SuSE 8.2 hat das prima funktioniert. Mit SuSE 9.0 oder 9.1 wird jedoch die zweite Partition (LUN1 ) nicht richtig erkannt. Beim scannen der LUNs werden scheibar unsinnige Werte gelesen.
Aus einem Posting von linuxhardware.de habe ich erfahren, daß das Problem auch mit einem Adaptec-Controller auftritt.
Nur mal ne Frage: ist im Kernel CONFIG_SCSI_MULTI_LUN eingebaut? Unter SCSI zu finden. Gruß Udo -- LILO, you've got me on my knees! (from David Black, dblack@pilot.njin.net, with apologies to Derek and the Dominos, and Werner Almsberger)
Udo Neist wrote:
Am Freitag Juli 30 2004 12:44 schrieb Michael Perezowsky:
Hallo, ich betreibe ein EasyRaid X12P mit SCSI160-Interface an einem LSI-Logic 53C1030 Dual-Channel SCSI320 Controller unter SuSE 9.1. Auf dem Raid-System sind zwei Partitionen mit je 465 GB eingerichtet.
Unter SuSE 8.2 hat das prima funktioniert. Mit SuSE 9.0 oder 9.1 wird jedoch die zweite Partition (LUN1 ) nicht richtig erkannt. Beim scannen der LUNs werden scheibar unsinnige Werte gelesen.
Aus einem Posting von linuxhardware.de habe ich erfahren, daß das Problem auch mit einem Adaptec-Controller auftritt.
Nur mal ne Frage: ist im Kernel CONFIG_SCSI_MULTI_LUN eingebaut? Unter SCSI zu finden.
Gruß Udo
Nur mal ne Antwort: Ja Hier noch mal ein Auzug aus boot.msg: <4>osst :I: $Id: osst.c,v 1.70 2003/12/23 14:22:12 wriede Exp $ <6>Fusion MPT base driver 3.01.09 <6>Copyright (c) 1999-2004 LSI Logic Corporation <6>ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 26 (level, low) -> IRQ 26 <6>mptbase: Initiating ioc0 bringup <6>ioc0: 53C1030: Capabilities={Initiator,Target} <6>ACPI: PCI interrupt 0000:03:08.1[B] -> GSI 27 (level, low) -> IRQ 27 <6>mptbase: Initiating ioc1 bringup <6>ioc1: 53C1030: Capabilities={Initiator,Target} <6>Fusion MPT SCSI Host driver 3.01.09 <6>scsi0 : ioc0: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=26 <6>scsi1 : ioc1: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=27 <5> Vendor: easyRAID Model: 12P Rev: 0001 <5> Type: Direct-Access ANSI SCSI revision: 03 <4>scsi: host 1 channel 0 id 0 lun 0x6500737952414944 has a LUN larger than currently supported. <4>scsi: host 1 channel 0 id 0 lun 0x2001325020202020 has a LUN larger than currently supported. <4>scsi: host 1 channel 0 id 0 lun 0x2002202020202020 has a LUN larger than currently supported. <4>scsi: host 1 channel 0 id 0 lun808529923 has a LUN larger than allowed by the host adapter <4>scsi: host 1 channel 0 id 0 lun3078 has a LUN larger than allowed by the host adapter <6>mice: PS/2 mouse device common for all mice Gruß, Michael
participants (2)
-
Michael Perezowsky
-
Udo Neist