Login vsftp als lokal user
Hallo Ich bin immer noch am rätseln, wie ich mich unter Leap 42.3 an einem lokalen ftp Server als lokaler Benutzer anmelde. Dies war unter 42.2 noch ohne Probleme möglich, unter 42.3 wird mir ein 530 Login incorrect angezeigt. michael 331 Please specify the password. Password: 530 Login incorrect. ftp: Login failed ftp> Nun lese ich unter https://en.opensuse.org/SDB:FTP_server#Quick_Configuration das es verschiedene Konfigurationsdateien gibt, die ich bisher nicht beachten musste. /etc/vsftpd.chroot_list This file describes the names of the users that have access to the whole system tree. To all other users their home directory will be showed as root directory (chroot). Die Datei existiert nicht. Brauche ich die ? /etc/shells Before admitting a local user to login, the system defaults to check if it has a valid user shell. In case PAM authentication is not available. Die Datei existiert, allerdings sind meine zwei Benutzer nicht darin aufgeführt Kann das die Ursache für meine LogIn Probleme sein ? Vielen Dank, Micha -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
Am 27.02.2018 um 11:42 schrieb Michael Schueller:
Hallo Moin moin,
Ich bin immer noch am rätseln, wie ich mich unter Leap 42.3 an einem lokalen ftp Server als lokaler Benutzer anmelde.
Dies war unter 42.2 noch ohne Probleme möglich, unter 42.3 wird mir ein 530 Login incorrect angezeigt.
michael 331 Please specify the password. Password: 530 Login incorrect. ftp: Login failed ftp>
Du solltest mal deine Konf hier zeigen wer soll denn so helfen. Btw. sichere die Konf, deinstalliere vsftp und installiere es neu. Bei der Standardinstallation von 42.3 geht es out of the box, grad getestet. Die Probleme kommen vllt. durch eine verquere alte Konf deininstallieren konf manuell löschen wenn nötig, vorher nat. sichern vsftp neu installieren mit default konf lg max
Nun lese ich unter https://en.opensuse.org/SDB:FTP_server#Quick_Configuration
das es verschiedene Konfigurationsdateien gibt, die ich bisher nicht beachten musste.
/etc/vsftpd.chroot_list
This file describes the names of the users that have access to the whole system tree. To all other users their home directory will be showed as root directory (chroot).
Die Datei existiert nicht. Brauche ich die ?
/etc/shells
Before admitting a local user to login, the system defaults to check if it has a valid user shell. In case PAM authentication is not available.
Die Datei existiert, allerdings sind meine zwei Benutzer nicht darin aufgeführt
Kann das die Ursache für meine LogIn Probleme sein ?
Vielen Dank, Micha
-- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
Am 27.02.2018 um 12:27 schrieb Markus Heinze:
Am 27.02.2018 um 11:42 schrieb Michael Schueller:
Hallo Moin moin,
Ich bin immer noch am rätseln, wie ich mich unter Leap 42.3 an einem lokalen ftp Server als lokaler Benutzer anmelde.
Dies war unter 42.2 noch ohne Probleme möglich, unter 42.3 wird mir ein 530 Login incorrect angezeigt.
michael 331 Please specify the password. Password: 530 Login incorrect. ftp: Login failed ftp>
Du solltest mal deine Konf hier zeigen wer soll denn so helfen.
Btw. sichere die Konf, deinstalliere vsftp und installiere es neu. Bei der Standardinstallation von 42.3 geht es out of the box, grad getestet. Die Probleme kommen vllt. durch eine verquere alte Konf
deininstallieren konf manuell löschen wenn nötig, vorher nat. sichern vsftp neu installieren mit default konf
lg max
Nun lese ich unter https://en.opensuse.org/SDB:FTP_server#Quick_Configuration
das es verschiedene Konfigurationsdateien gibt, die ich bisher nicht beachten musste.
/etc/vsftpd.chroot_list
This file describes the names of the users that have access to the whole system tree. To all other users their home directory will be showed as root directory (chroot).
Die Datei existiert nicht. Brauche ich die ?
nein, im Gegenteil. Wer da drin ist, kann in alle Verzeichnisse, für die _nicht_ drinstehenden ist /home/<user> die Wurzel, die kommen da nicht raus.
/etc/shells
quatsch. Ist die Liste der als Shell-Interpreter gewerteten Programme.
Before admitting a local user to login, the system defaults to check if it has a valid user shell. In case PAM authentication is not available.
Die Datei existiert, allerdings sind meine zwei Benutzer nicht darin aufgeführt
welche (/etc/shells?) s.o.
Kann das die Ursache für meine LogIn Probleme sein ?
Vielen Dank, Micha
Hi, kann es sein, dass das update oder was auch immer Deine conf beschädigt hat: z.B. muss da irgendwo ein local_enable=YES und auch pam_service_name=vsftpd stehen. Eigentlich müsstest Du auch ein LOG haben... cu jth -- www.teddylinx.de -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
Am 27.02.2018 um 14:54 schrieb Joerg Thuemmler:
Hi,
kann es sein, dass das update oder was auch immer Deine conf beschädigt hat: z.B. muss da irgendwo ein
local_enable=YES
und auch
pam_service_name=vsftpd
stehen. Eigentlich müsstest Du auch ein LOG haben...
cu jth
Nabnd Joerg Steht alles drin... und die Datei /etc/pam.d/vsftpd existiert auch Ich könnte mir vorstellen, das ich aus Sicherheitsgründen, jetzt eine user_list anlegen muß. Also eine positiv Liste # Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # If you do not change anything here you will have a minimum setup for an # anonymus FTP server. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # ################ # General Settings # ################ # # Uncomment this to enable any form of FTP write command. write_enable=NO # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. nopriv_user=ftpsecure # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # If enabled, all user and group information in # directory listings will be displayed as "ftp". #hide_ids=YES # # ####################### # Local FTP user Settings # ####################### # # Uncomment this to allow local users to log in. local_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #local_umask=022 # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # Performs chroot with original (non-root) credentials. This is usefull on nfs with squash_root, # where root becomes nobody and would need -x access. #allow_root_squashed_chroot=YES # # The maximum data transfer rate permitted, in bytes per second, for # local authenticated users. The default is 0 (unlimited). #local_max_rate=7200 # # ########################## # Anonymus FTP user Settings # ########################## # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=YES # # The maximum data transfer rate permitted, in bytes per second, for anonymous # authenticated users. The default is 0 (unlimited). #anon_max_rate=7200 # # Anonymous users will only be allowed to download files which are # world readable. anon_world_readable_only=YES # # Default umask for anonymus users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #anon_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Uncomment this to enable anonymus FTP users to perform other write operations # like deletion and renaming. #anon_other_write_enable=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # ############ # Log Settings # ############ # # Log to the syslog daemon instead of using an logfile. syslog_enable=YES # # Uncomment this to log all FTP requests and responses. #log_ftp_protocol=YES # # Activate logging of uploads/downloads. #xferlog_enable=YES # # You may override where the log file goes if you like. The default is shown # below. # #vsftpd_log_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. #xferlog_std_format=YES # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # Enable this to have booth logfiles. Standard xferlog and vsftpd's own style log. #dual_log_enable=YES # # Uncomment this to enable session status information in the system process listing. #setproctitle_enable=YES # # ################# # Transfer Settings # ################# # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. ascii_upload_enable=YES #ascii_download_enable=YES # # Set to NO if you want to disallow the PASV method of obtaining a data # connection. #pasv_enable=NO # # PAM setting. Do NOT change this unless you know what you do! pam_service_name=vsftpd # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=NO # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! listen_ipv6=NO # # Set to ssl_enable=YES if you want to enable SSL ssl_enable=NO # # Limit passive ports to this range to assis firewalling pasv_min_port=30000 pasv_max_port=30100 anon_mkdir_write_enable=NO anon_root=/mnt/movies/avi anon_upload_enable=NO chroot_local_user=NO ftpd_banner=Begrüßungstext idle_session_timeout=900 log_ftp_protocol=YES max_clients=10 max_per_ip=3 pasv_enable=YES ssl_sslv2=NO ssl_sslv3=NO ssl_tlsv1=YES xferlog_enable=YES local_root=/ ### security features that are incompatible with some other settings. ### # isolate_network ensures the vsftpd subprocess is started in own network # namespace (see CLONE_NEWNET in clone(2)). It however disables the # authentication methods needs the network access (LDAP, NIS, ...). #isolate_network=NO # seccomp_sanbox add an aditional security layer limiting the number of a # syscalls can be performed via vsftpd. However it might happen that a # whitelist don't allow a legitimate call (usually indirectly triggered by # third-party library like pam, or openssl) and the process is being killed by kernel. # # Therefor if your server dies on common situations (file download, upload), # uncomment following line and don't forget to open bug at # https://bugzilla.novell.com #seccomp_sandbox=NO -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
Am 27.02.2018 um 22:29 schrieb Michael Schueller:
Am 27.02.2018 um 14:54 schrieb Joerg Thuemmler:
Hi,
kann es sein, dass das update oder was auch immer Deine conf beschädigt hat: z.B. muss da irgendwo ein
local_enable=YES
und auch
pam_service_name=vsftpd
stehen. Eigentlich müsstest Du auch ein LOG haben...
cu jth
Nabnd Joerg
Steht alles drin... und die Datei /etc/pam.d/vsftpd existiert auch
Ich könnte mir vorstellen, das ich aus Sicherheitsgründen, jetzt eine user_list anlegen muß. Also eine positiv Liste
# Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # If you do not change anything here you will have a minimum setup for an # anonymus FTP server. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # ################ # General Settings # ################ # # Uncomment this to enable any form of FTP write command. write_enable=NO # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. nopriv_user=ftpsecure # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # If enabled, all user and group information in # directory listings will be displayed as "ftp". #hide_ids=YES # # ####################### # Local FTP user Settings # ####################### # # Uncomment this to allow local users to log in. local_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #local_umask=022 # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # Performs chroot with original (non-root) credentials. This is usefull on nfs with squash_root, # where root becomes nobody and would need -x access. #allow_root_squashed_chroot=YES # # The maximum data transfer rate permitted, in bytes per second, for # local authenticated users. The default is 0 (unlimited). #local_max_rate=7200 # # ########################## # Anonymus FTP user Settings # ########################## # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=YES # # The maximum data transfer rate permitted, in bytes per second, for anonymous # authenticated users. The default is 0 (unlimited). #anon_max_rate=7200 # # Anonymous users will only be allowed to download files which are # world readable. anon_world_readable_only=YES # # Default umask for anonymus users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #anon_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Uncomment this to enable anonymus FTP users to perform other write operations # like deletion and renaming. #anon_other_write_enable=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # ############ # Log Settings # ############ # # Log to the syslog daemon instead of using an logfile. syslog_enable=YES # # Uncomment this to log all FTP requests and responses. #log_ftp_protocol=YES # # Activate logging of uploads/downloads. #xferlog_enable=YES # # You may override where the log file goes if you like. The default is shown # below. # #vsftpd_log_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. #xferlog_std_format=YES # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # Enable this to have booth logfiles. Standard xferlog and vsftpd's own style log. #dual_log_enable=YES # # Uncomment this to enable session status information in the system process listing. #setproctitle_enable=YES # # ################# # Transfer Settings # ################# # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. ascii_upload_enable=YES #ascii_download_enable=YES # # Set to NO if you want to disallow the PASV method of obtaining a data # connection. #pasv_enable=NO # # PAM setting. Do NOT change this unless you know what you do! pam_service_name=vsftpd # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=NO # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! listen_ipv6=NO # # Set to ssl_enable=YES if you want to enable SSL ssl_enable=NO # # Limit passive ports to this range to assis firewalling pasv_min_port=30000 pasv_max_port=30100 anon_mkdir_write_enable=NO anon_root=/mnt/movies/avi anon_upload_enable=NO chroot_local_user=NO ftpd_banner=Begrüßungstext idle_session_timeout=900 log_ftp_protocol=YES max_clients=10 max_per_ip=3 pasv_enable=YES ssl_sslv2=NO ssl_sslv3=NO ssl_tlsv1=YES xferlog_enable=YES local_root=/
### security features that are incompatible with some other settings. ###
# isolate_network ensures the vsftpd subprocess is started in own network # namespace (see CLONE_NEWNET in clone(2)). It however disables the # authentication methods needs the network access (LDAP, NIS, ...). #isolate_network=NO
# seccomp_sanbox add an aditional security layer limiting the number of a # syscalls can be performed via vsftpd. However it might happen that a # whitelist don't allow a legitimate call (usually indirectly triggered by # third-party library like pam, or openssl) and the process is being killed by kernel. # # Therefor if your server dies on common situations (file download, upload), # uncomment following line and don't forget to open bug at # https://bugzilla.novell.com #seccomp_sandbox=NO
Hi, denke ich eigentlich nicht. Aber hast Du eine Negativliste /etc/ftpusers (Name ist etwas irreführend, steht in /etc/pam.d/vsftpd mit "required" und "sense=deny", d.h. die musst Du wohl haben. Kam bei mir allerdings bei der Installation mit (wie auch /etc/pam.d/vsftpd) und ist belegt mit den Systemaccounts aller Art (root, postgres,... ), also Accounts, die sicher FTP nicht nutzen sollten... cu jth -- www.teddylinx.de -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
Am 2018-02-28 08:49, schrieb Joerg Thuemmler:
Am 27.02.2018 um 22:29 schrieb Michael Schueller:
Am 27.02.2018 um 14:54 schrieb Joerg Thuemmler:
Hi,
kann es sein, dass das update oder was auch immer Deine conf beschädigt hat: z.B. muss da irgendwo ein
local_enable=YES
und auch
pam_service_name=vsftpd
stehen. Eigentlich müsstest Du auch ein LOG haben...
cu jth
Nabnd Joerg
Steht alles drin... und die Datei /etc/pam.d/vsftpd existiert auch
Ich könnte mir vorstellen, das ich aus Sicherheitsgründen, jetzt eine user_list anlegen muß. Also eine positiv Liste
# Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # If you do not change anything here you will have a minimum setup for an # anonymus FTP server. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # ################ # General Settings # ################ # # # Therefor if your server dies on common situations (file download, upload), # uncomment following line and don't forget to open bug at # https://bugzilla.novell.com #seccomp_sandbox=NO
Moin moin,
Hi,
denke ich eigentlich nicht. Aber hast Du eine Negativliste /etc/ftpusers (Name ist etwas irreführend, steht in /etc/pam.d/vsftpd mit "required" und "sense=deny", d.h. die musst Du wohl haben. Kam bei mir allerdings bei der Installation mit (wie auch /etc/pam.d/vsftpd) und ist belegt mit den Systemaccounts aller Art (root, postgres,... ), also Accounts, die sicher FTP nicht nutzen sollten...
cu jth
Ich denk auch das es daran liegt, hab die Konf grad hier auf 42.3 getestet, geht. Vermutlich sind es schon Alt-User mit UID<1000 und beim Upgrade in die /etc/ftpusers geflogen, was anderes kann ich mir nicht mehr vorstellen
-- www.teddylinx.de
mfg -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
Am 28.02.2018 um 09:09 schrieb max@freecards.de:
Ich denk auch das es daran liegt, hab die Konf grad hier auf 42.3 getestet, geht. Vermutlich sind es schon Alt-User mit UID<1000 und beim Upgrade in die /etc/ftpusers geflogen, was anderes kann ich mir nicht mehr vorstellen
Danke für Eure Gedanken, aber in der /etc/ftpusers steht kein lokaler Benutzer drin # # ftpusers This file describes the names of the users that may # _*NOT*_ log into the system via the FTP server. # This usually includes "root", "uucp", "news" and the # like, because those users have too much power to be # allowed to do "just" FTP... # adabas amanda at bin cyrus daemon dbmaker db2fenc1 db2inst1 db2as db4web dpbox empress fax firewall fnet games gdm gnats irc informix ingres ixess lnx lp mail man mdom mysql named news nobody nps oracle perforce pop postfix postgres root sapdb skyrix squid uucp virtuoso vscan wnn wwwrun yard zope # End. Die zwei lokalen Benutzer sind in der Gruppe ftp und so sieht meine /etc/pam.d/vsftpd aus #%PAM-1.0 # Uncomment this to achieve what used to be ftpd -A. # auth required pam_listfile.so item=user sense=allow file=/etc/ftpchroot onerr=fail auth required pam_listfile.so item=user sense=deny file=/etc/ftpusers onerr=succeed # Uncomment the following line for anonymous ftp. #auth sufficient pam_ftp.so auth required pam_shells.so auth include common-auth account include common-account password include common-password session required pam_loginuid.so session include common-session -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
Hi, Am 2018-02-28 09:41, schrieb Michael Schueller:
Am 28.02.2018 um 09:09 schrieb max@freecards.de:
Ich denk auch das es daran liegt, hab die Konf grad hier auf 42.3 getestet, geht. Vermutlich sind es schon Alt-User mit UID<1000 und beim Upgrade in die /etc/ftpusers geflogen, was anderes kann ich mir nicht mehr vorstellen
Danke für Eure Gedanken, aber in der /etc/ftpusers steht kein lokaler Benutzer drin
Was haben denn die User für eine Shell? ggf mal in der common-auth den Parameter audit setzen und im Logfile schauen was passiert
Die zwei lokalen Benutzer sind in der Gruppe ftp und so sieht meine /etc/pam.d/vsftpd aus #%PAM-1.0
# Uncomment this to achieve what used to be ftpd -A. # auth required pam_listfile.so item=user sense=allow file=/etc/ftpchroot onerr=fail
auth required pam_listfile.so item=user sense=deny file=/etc/ftpusers onerr=succeed # Uncomment the following line for anonymous ftp. #auth sufficient pam_ftp.so auth required pam_shells.so auth include common-auth account include common-account password include common-password session required pam_loginuid.so session include common-session
lg mAX -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org
participants (4)
-
Joerg Thuemmler -
Markus Heinze -
max＠freecards.de
-
Michael Schueller