Hi Seit einiger Zeit habe ich ziemliche Probleme mit dem CD Brennen. Manchmal funktioniert es, manchmal bricht es irgendwo drin ab, k3b meldet dann zB, dass cdrecord keine Berechtigung hätte, die CD auszuwerfen - ich wüsste jedoch nicht, was das für Berechtigungen wären die cdrecord noch bräuchte? k3b meldet auch keine probleme in der systemkonfiguration. Nach diesem letzten Fehler waren folgende Zeilen in warn und messages: Apr 5 00:25:33 muellhalde kernel: scsi: unknown opcode 0xe9 Apr 5 00:25:33 muellhalde kernel: scsi: unknown opcode 0xed Apr 5 00:25:36 muellhalde kernel: scsi: unknown opcode 0xf5 Apr 5 00:26:23 muellhalde kernel: scsi: unknown opcode 0xeb Wenn ich nun diese CD einschiebe passiert überhaupt nix. kein popup, keine meldung in messages, nix. Auch wenn ich eine CD erneut einschiebe kommen diese unknown opcodes nicht immer...??! Ich verwende SuSE 10.3 64bit. Der Brenner ist ein Plextor PX-810SA (SATA) Vielen Dank Matti -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Hier noch ein k3b error log System ----------------------- K3b Version: 1.0.4 KDE Version: 3.5.7 "release 72.6" QT Version: 3.3.8 Kernel: 2.6.22.17-0.1-default Devices ----------------------- PLEXTOR DVDR PX-810SA 1.01 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] K3bIsoImager ----------------------- mkisofs print size result: 348449 (713623552 bytes) Pipe throughput: 72185856 bytes read, 72181376 bytes written. Used versions ----------------------- mkisofs: 1.1.6 cdrecord: 1.1.6 cdrecord ----------------------- /usr/bin/X11/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.6 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 1 = CD-ROM Driveropts: 'burnfree' Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'PLEXTOR ' Identification : 'DVDR PX-810SA ' Revision : '1.01' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 (CD-R) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0012 (DVD-RAM) Profile: 0x0002 (Removable disk) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) (current) Profile: 0x0008 (CD-ROM) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1267712 = 1238 KB FIFO size : 4194304 = 4096 KB Speed set to 7056 KB/s Track 01: data 680 MB Total size: 781 MB (77:25.98) = 348449 sectors Lout start: 781 MB (77:27/74) = 348449 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -12369 (97:17/06) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 69 Manufacturer: Moser Baer India Limited Manufacturer is guessed because of the orange forum embargo. The orange forum likes to get money for recent information. The information for this media may not be correct. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 11400 Starting to write CD/DVD at speed 40.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 680 MB written. Track 01: 1 of 680 MB written (fifo 100%) [buf 100%] 0.4x. Track 01: 2 of 680 MB written (fifo 100%) [buf 100%] 18.0x. Track 01: 3 of 680 MB written (fifo 100%) [buf 100%] 18.6x. Track 01: 4 of 680 MB written (fifo 100%) [buf 100%] 18.0x. Track 01: 5 of 680 MB written (fifo 100%) [buf 100%] 18.7x. Track 01: 6 of 680 MB written (fifo 100%) [buf 98%] 18.1x. Track 01: 7 of 680 MB written (fifo 100%) [buf 100%] 18.7x. Track 01: 8 of 680 MB written (fifo 98%) [buf 100%] 18.2x. Track 01: 9 of 680 MB written (fifo 100%) [buf 100%] 18.8x. Track 01: 10 of 680 MB written (fifo 100%) [buf 100%] 18.3x. Track 01: 11 of 680 MB written (fifo 100%) [buf 100%] 18.9x. Track 01: 12 of 680 MB written (fifo 100%) [buf 100%] 18.3x. Track 01: 13 of 680 MB written (fifo 100%) [buf 100%] 19.0x. Track 01: 14 of 680 MB written (fifo 100%) [buf 100%] 18.4x. Track 01: 15 of 680 MB written (fifo 100%) [buf 99%] 19.0x. Track 01: 16 of 680 MB written (fifo 98%) [buf 100%] 18.5x. Track 01: 17 of 680 MB written (fifo 100%) [buf 100%] 19.1x. Track 01: 18 of 680 MB written (fifo 100%) [buf 99%] 18.5x. Track 01: 19 of 680 MB written (fifo 100%) [buf 100%] 19.2x. Track 01: 20 of 680 MB written (fifo 100%) [buf 100%] 18.6x. Track 01: 21 of 680 MB written (fifo 100%) [buf 100%] 16.2x. Track 01: 22 of 680 MB written (fifo 100%) [buf 100%] 18.7x. Track 01: 23 of 680 MB written (fifo 100%) [buf 100%] 19.3x. Track 01: 24 of 680 MB written (fifo 100%) [buf 100%] 18.8x. Track 01: 25 of 680 MB written (fifo 100%) [buf 100%] 19.4x. Track 01: 26 of 680 MB written (fifo 100%) [buf 100%] 18.8x. Track 01: 27 of 680 MB written (fifo 100%) [buf 100%] 19.5x. Track 01: 28 of 680 MB written (fifo 100%) [buf 99%] 18.9x. Track 01: 29 of 680 MB written (fifo 98%) [buf 100%] 19.6x. Track 01: 30 of 680 MB written (fifo 100%) [buf 100%] 19.0x. Track 01: 31 of 680 MB written (fifo 100%) [buf 99%] 19.6x. Track 01: 32 of 680 MB written (fifo 100%) [buf 100%] 19.0x. Track 01: 33 of 680 MB written (fifo 100%) [buf 99%] 19.6x. Track 01: 34 of 680 MB written (fifo 100%) [buf 99%] 20.2x. Track 01: 35 of 680 MB written (fifo 100%) [buf 100%] 19.7x. Track 01: 36 of 680 MB written (fifo 100%) [buf 100%] 20.3x. Track 01: 37 of 680 MB written (fifo 100%) [buf 100%] 19.7x. Track 01: 38 of 680 MB written (fifo 98%) [buf 100%] 20.4x. Track 01: 39 of 680 MB written (fifo 98%) [buf 100%] 19.8x. Track 01: 40 of 680 MB written (fifo 98%) [buf 99%] 20.5x. Track 01: 41 of 680 MB written (fifo 100%) [buf 100%] 19.9x. Track 01: 42 of 680 MB written (fifo 100%) [buf 99%] 20.5x. Track 01: 43 of 680 MB written (fifo 98%) [buf 100%] 19.9x. Track 01: 44 of 680 MB written (fifo 98%) [buf 100%] 20.6x. Track 01: 45 of 680 MB written (fifo 100%) [buf 99%] 20.0x. Track 01: 46 of 680 MB written (fifo 100%) [buf 99%] 20.5x. Track 01: 47 of 680 MB written (fifo 100%) [buf 100%] 20.2x. Track 01: 48 of 680 MB written (fifo 100%) [buf 99%] 20.7x. Track 01: 49 of 680 MB written (fifo 100%) [buf 100%] 20.1x. Track 01: 50 of 680 MB written (fifo 100%) [buf 98%] 20.8x. Track 01: 51 of 680 MB written (fifo 100%) [buf 100%] 20.2x. Track 01: 52 of 680 MB written (fifo 100%) [buf 100%] 20.8x. Track 01: 53 of 680 MB written (fifo 100%) [buf 100%] 20.2x. Track 01: 54 of 680 MB written (fifo 100%) [buf 100%] 20.9x. Track 01: 55 of 680 MB written (fifo 98%) [buf 100%] 20.3x. Track 01: 56 of 680 MB written (fifo 98%) [buf 100%] 21.0x. Track 01: 57 of 680 MB written (fifo 100%) [buf 100%] 20.3x. Track 01: 58 of 680 MB written (fifo 100%) [buf 100%] 21.0x. Track 01: 59 of 680 MB written (fifo 100%) [buf 99%] 20.4x. Track 01: 60 of 680 MB written (fifo 98%) [buf 99%] 21.1x. Track 01: 61 of 680 MB written (fifo 100%) [buf 99%] 20.4x. Track 01: 62 of 680 MB written (fifo 100%) [buf 100%] 21.1x. Track 01: 63 of 680 MB written (fifo 100%) [buf 99%] 20.5x. Track 01: 64 of 680 MB written (fifo 100%) [buf 99%] 21.1x. Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 00 81 B1 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 30 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x02 (cannot read medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.060s timeout 200s /usr/bin/X11/wodim: A write error occured. /usr/bin/X11/wodim: Please properly read the error message above. write track data: error after 67995648 bytes Writing time: 60.058s Average write speed 102.7x. Min drive buffer fill was 98% Fixating... Fixating time: 0.012s /usr/bin/X11/wodim: fifo had 1135 puts and 1072 gets. /usr/bin/X11/wodim: fifo was 0 times empty and 873 times full, min fill was 79%. cdrecord command: ----------------------- /usr/bin/X11/wodim -v gracetime=2 dev=/dev/sr0 speed=40 -dao driveropts=burnfree -eject -data -tsize=348449s - mkisofs ----------------------- 348449 I: -input-charset not specified, using utf-8 (detected in locale settings) 0.15% done, estimate finish Sat Apr 5 21:24:37 2008 0.29% done, estimate finish Sat Apr 5 21:19:02 2008 0.43% done, estimate finish Sat Apr 5 21:17:07 2008 0.58% done, estimate finish Sat Apr 5 21:16:08 2008 0.72% done, estimate finish Sat Apr 5 22:36:31 2008 0.86% done, estimate finish Sat Apr 5 22:22:47 2008 1.01% done, estimate finish Sat Apr 5 22:14:36 2008 1.15% done, estimate finish Sat Apr 5 22:06:47 2008 1.29% done, estimate finish Sat Apr 5 22:00:54 2008 1.44% done, estimate finish Sat Apr 5 21:57:20 2008 1.58% done, estimate finish Sat Apr 5 21:53:23 2008 1.73% done, estimate finish Sat Apr 5 21:50:56 2008 1.87% done, estimate finish Sat Apr 5 21:48:04 2008 2.01% done, estimate finish Sat Apr 5 21:45:36 2008 2.15% done, estimate finish Sat Apr 5 21:44:14 2008 2.30% done, estimate finish Sat Apr 5 21:42:15 2008 2.44% done, estimate finish Sat Apr 5 21:40:34 2008 2.58% done, estimate finish Sat Apr 5 21:39:42 2008 2.73% done, estimate finish Sat Apr 5 21:38:19 2008 2.87% done, estimate finish Sat Apr 5 21:37:37 2008 3.02% done, estimate finish Sat Apr 5 21:36:28 2008 3.16% done, estimate finish Sat Apr 5 21:35:25 2008 3.30% done, estimate finish Sat Apr 5 21:34:58 2008 3.44% done, estimate finish Sat Apr 5 21:34:04 2008 3.59% done, estimate finish Sat Apr 5 21:33:13 2008 3.73% done, estimate finish Sat Apr 5 21:32:54 2008 3.88% done, estimate finish Sat Apr 5 21:32:11 2008 4.02% done, estimate finish Sat Apr 5 21:31:55 2008 4.17% done, estimate finish Sat Apr 5 21:31:16 2008 4.31% done, estimate finish Sat Apr 5 21:30:40 2008 4.45% done, estimate finish Sat Apr 5 21:30:29 2008 4.59% done, estimate finish Sat Apr 5 21:29:57 2008 4.74% done, estimate finish Sat Apr 5 21:29:26 2008 4.88% done, estimate finish Sat Apr 5 21:29:18 2008 5.02% done, estimate finish Sat Apr 5 21:28:51 2008 5.17% done, estimate finish Sat Apr 5 21:28:25 2008 5.31% done, estimate finish Sat Apr 5 21:28:19 2008 5.45% done, estimate finish Sat Apr 5 21:27:56 2008 5.60% done, estimate finish Sat Apr 5 21:27:33 2008 5.74% done, estimate finish Sat Apr 5 21:27:29 2008 5.88% done, estimate finish Sat Apr 5 21:27:08 2008 6.03% done, estimate finish Sat Apr 5 21:26:48 2008 6.17% done, estimate finish Sat Apr 5 21:26:45 2008 6.32% done, estimate finish Sat Apr 5 21:26:27 2008 6.46% done, estimate finish Sat Apr 5 21:26:10 2008 6.60% done, estimate finish Sat Apr 5 21:26:08 2008 6.75% done, estimate finish Sat Apr 5 21:25:51 2008 6.89% done, estimate finish Sat Apr 5 21:25:50 2008 7.03% done, estimate finish Sat Apr 5 21:25:35 2008 7.18% done, estimate finish Sat Apr 5 21:25:20 2008 7.32% done, estimate finish Sat Apr 5 21:25:20 2008 7.46% done, estimate finish Sat Apr 5 21:25:06 2008 7.61% done, estimate finish Sat Apr 5 21:24:52 2008 7.75% done, estimate finish Sat Apr 5 21:24:52 2008 7.89% done, estimate finish Sat Apr 5 21:24:40 2008 8.04% done, estimate finish Sat Apr 5 21:24:27 2008 8.18% done, estimate finish Sat Apr 5 21:24:28 2008 8.32% done, estimate finish Sat Apr 5 21:24:16 2008 8.47% done, estimate finish Sat Apr 5 21:24:05 2008 8.61% done, estimate finish Sat Apr 5 21:24:06 2008 8.75% done, estimate finish Sat Apr 5 21:23:55 2008 8.90% done, estimate finish Sat Apr 5 21:23:45 2008 9.04% done, estimate finish Sat Apr 5 21:23:46 2008 9.19% done, estimate finish Sat Apr 5 21:23:36 2008 9.33% done, estimate finish Sat Apr 5 21:23:27 2008 9.47% done, estimate finish Sat Apr 5 21:23:28 2008 9.61% done, estimate finish Sat Apr 5 21:23:19 2008 9.76% done, estimate finish Sat Apr 5 21:23:10 2008 9.90% done, estimate finish Sat Apr 5 21:23:11 2008 10.05% done, estimate finish Sat Apr 5 21:23:03 2008 mkisofs calculate size command: ----------------------- /usr/bin/X11/genisoimage -gui -graft-points -print-size -quiet -volid Gotthard -volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-matti/k3b3RFVAa.tmp -rational-rock -hide-list /tmp/kde-matti/k3bRmJ8ia.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-matti/k3bs1sO9b.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-matti/k3b94vPDa.tmp mkisofs command: ----------------------- /usr/bin/X11/genisoimage -gui -graft-points -volid Gotthard -volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-matti/k3bEHvQva.tmp -rational-rock -hide-list /tmp/kde-matti/k3brVb59a.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-matti/k3bKsaGHb.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-matti/k3bFYRUUb.tmp -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
Hallo, Am Sam, 05 Apr 2008, Matthias Keller schrieb: [..]
Disk sub type: Medium Type B, low Beta category (B-) (4) [..] Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 69 Manufacturer: Moser Baer India Limited Manufacturer is guessed because of the orange forum embargo. [..] Track 01: 64 of 680 MB written (fifo 100%) [buf 99%] 21.1x. Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 00 81 B1 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 30 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x02 (cannot read medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid)
Dein Brenner (bzw. dessen Firmware) kommt mit diesem Rohling bei dieser Geschwindigkeit wohl nicht klar. IIRC sind die MBI-Rohlinge sowieso nicht zu empfehlen. Und zumindest den Mittelteil der Fortschrittsanzeige hättest du selber löschen können. Bitte schalte dein Gehirn ein, wenn du an die Liste schreibst. -dnh -- He and his wife had a fondness for exploring state and national parks in their Volkswagen bus, dubbed the Touring Machine, in which he wrote many technical papers. -- unknown about Edsger Dijkstra -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
David Haller wrote:
Hallo,
Am Sam, 05 Apr 2008, Matthias Keller schrieb: [..]
Disk sub type: Medium Type B, low Beta category (B-) (4)
[..]
Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 69 Manufacturer: Moser Baer India Limited Manufacturer is guessed because of the orange forum embargo.
[..]
Track 01: 64 of 680 MB written (fifo 100%) [buf 99%] 21.1x. Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 00 81 B1 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 30 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x02 (cannot read medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid)
Dein Brenner (bzw. dessen Firmware) kommt mit diesem Rohling bei dieser Geschwindigkeit wohl nicht klar. IIRC sind die MBI-Rohlinge sowieso nicht zu empfehlen.
Das merkwürdige ist eben, von exakt diesen Rohlingen habe ich schon hunderte gebrannt. sie sind von imation und ich habe bisher immer gute Erfahrungen damit gemacht. Erst seit wenigen Tagen habe ich dieses Problem (resp kann auch schon ca 2 Wochen sein, weil ich in den letzten 2 Wochen nix mehr gebrannt hab) Von dieser 50er Spindel habe ich nun schon etwa 40 erfolgreich gebrannt, ist also eher unwahrscheinlich, dass wirklich mit den Rohlingen jetzt plötzlich etwas sein sollte ?? Grüsse Matti -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org
participants (2)
-
David Haller
-
Matthias Keller