Hallo Liste, ich versuche seit Tagen verzweifelt meinen XServer zu konfigurieren. Hardware : ELSA GLADIAC 2 , ATHLON 1000 , Monitor 19" von Scott (30-96kHz,50-150Hz). Ich habe mir sie Sourcen von xfree-4.1.0 bei Suse gezogen und compiliert/installiert. Wenn ich nun versuche mit sax2 die Konfiguration von /etc/X11/XF86Config zu machen, bricht sax2 ab, hier mal die entsprechenen Auszüge aus /var/log/sax.log : ---schnipp--- XFree86 Version 4.1.0 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.3 i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jul 23 14:21:54 2001 (++) Using config file: "/tmp/sax2-856/XF86Config" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "Layout[all]" (**) |-->Screen "Screen[0]" (0) (**) | |-->Monitor "Monitor[0]" (**) | |-->Device "Device[0]" (**) |-->Input Device "Keyboard[0]" (**) XKB: rules: "xfree86" (**) XKB: model: "pc104" (**) XKB: layout: "de" (**) XKB: variant: "nodeadkeys" ---schnipp--- (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI: (0:9:0) BrookTree unknown chipset (0x036e) rev 17, Mem @ 0xe3003000/12 (--) PCI:*(1:0:0) NVidia GeForce2 GTS rev 163, Mem @ 0xe0000000/24, 0xd8000000/27 (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.1.9 (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.1251 (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) NVIDIA: NVIDIA driver for: RIVA TNT, RIVA TNT2, RIVA TNT2 (Ultra), RIVA TNT2 (Vanta), RIVA TNT2 (M64), RIVA TNT2 (??), RIVA TNT2 (??), RIVA TNT2 (Integrated), GeForce 256, GeForce DDR, Quadro, GeForce2 MX, GeForce2 MX DDR, GeForce2 Go, GeForce2 MXR, GeForce2 GTS, GeForce2 GTS, GeForce2 Ultra, Quadro2 Pro, GeForce3, GeForce3, GeForce3, GeForce3 (--) Chipset GeForce2 GTS found (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16 (==) NVIDIA(0): RGB weight 565 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) NVIDIA(0): Linear framebuffer at 0xD8000000 (--) NVIDIA(0): MMIO registers at 0xE0000000 (--) NVIDIA(0): VideoRAM: 32768 kBytes (--) NVIDIA(0): DAC 0: maximum pixel clock at 16 bpp: 350 MHz (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) NVIDIA(0): Monitor[0]: Using hsync value of 31.00 kHz (II) NVIDIA(0): Monitor[0]: Using vrefresh value of 50.00 Hz (II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz (II) NVIDIA(0): Not using mode "800x600" (hsync out of range) (II) NVIDIA(0): Not using default mode "640x350" (hsync out of range) --schnipp--- (II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range) (WW) NVIDIA(0): Mode pool is empty (EE) NVIDIA(0): No modes remaining for head 0 (EE) NVIDIA(0): *** Aborting *** (II) Unloading /usr/X11R6/lib/modules/libddc.a (II) Unloading /usr/X11R6/lib/modules/libvgahw.a (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found ---schnipp--- Wie man sieht, kriegt sax2 es mit meinem Monitor nicht geregelt, obwohl ich vorher (Xfree-4.0.1) eine Auflösung von 1280x960,32Bit Farbtiefe benutzt habe. Wie kriege ich das wieder hin ? Die einzige Besonderheit an meinem System (Suse 7.1) ist, daß ich den gcc 2.95.3 gepatcht habe (pgcc -> athlonpgcc). ( gcc -v : Reading specs from /usr/local/lib/gcc-lib/i686-pc-linux-gnu/pgcc-2.95.3/specs gcc version pgcc-2.95.3 19991024 (AMD-20001029-1) ) Eigentlich macht das keine Probleme, ich habe auch meine Kernel damit compiliert und es funzt. Ich hoffe irgendjemand aus der Liste hat einen Tip, ich werde noch wahnsinnig. mfg Harry
Harry Rüter wrote:
Hallo Liste,
ich versuche seit Tagen verzweifelt meinen XServer zu konfigurieren.
Hardware : ELSA GLADIAC 2 , ATHLON 1000 , Monitor 19" von Scott (30-96kHz,50-150Hz). Ich habe mir sie Sourcen von xfree-4.1.0 bei Suse gezogen und compiliert/installiert. Wenn ich nun versuche mit sax2 die Konfiguration von /etc/X11/XF86Config zu machen, bricht sax2 ab,
Hallo Harry, hast Du die alte /etc/X11/XF86Config noch? Was ist, wenn Du diese nimmst? Man muß nämlich nicht Sax2 verwenden. Es gibt auch ein Konfig tool von XF86. Gruß Jürgen
participants (2)
-
Harry Rüter
-
Juergen_Gowin@t-online.de