Hi, wer kann mir folgende 'warnings' erklaeren? File: /var/log/warn Aug 4 11:43:20 lichee kernel: hda: timeout waiting for DMA Aug 4 11:43:20 lichee kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 12 Aug 4 11:43:20 lichee kernel: hda: irq timeout: status=0xd0 { Busy } Aug 4 11:43:50 lichee kernel: ide0: reset timed-out, status=0x80 Aug 4 11:43:50 lichee kernel: hda: status timeout: status=0x80 { Busy } Aug 4 11:43:50 lichee kernel: hda: drive not ready for command Aug 4 11:44:20 lichee kernel: ide0: reset timed-out, status=0x80 Aug 4 11:44:20 lichee kernel: hda: status timeout: status=0x80 { Busy } Aug 4 11:44:20 lichee kernel: end_request: I/O error, dev 03:08 (hda), sector 524304 Aug 4 11:44:20 lichee kernel: hda: drive not ready for command Aug 4 11:44:20 lichee kernel: hda: status timeout: status=0x80 { Busy } Aug 4 11:44:20 lichee kernel: hda: drive not ready for command Aug 4 11:44:23 lichee kernel: ide0: reset: success  In der boot.local steht: 'hdparm -k1 -c1 -d1 -X64 /dev/hda' (hdparm version 3.9) Auszug aus /var/log/boot.msg: <6>Uniform Multi-Platform E-IDE driver Revision: 6.30 <4>ide: Assuming 40MHz system bus speed for PIO modes; override with idebus=xx <4>VP_IDE: IDE controller on PCI bus 00 dev 39 <4>VP_IDE: not 100% native mode: will probe irqs later <4>VT 82C691 Apollo Pro Chipset Core ATA-33 <4>Split FIFO Configuration: 8 Primary buffers, threshold = 1/2 <4> 8 Second. buffers, threshold = 1/2 <4> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio <4>ide0: VIA Bus-Master (U)DMA Timing Config Success <4> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio <4>ide1: VIA Bus-Master (U)DMA Timing Config Success <4>hda: ST320423A, ATA DISK drive <4>hdc: LTN403L, ATAPI CDROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>hda: ST320423A, 19536MB w/512kB Cache, CHS=2490/255/63 --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com