FW: Re:Re: HylaFAX und Creatix Modem SG144 -> Phase B error
ist wohl im nirvana gelandet ;-))
-----Original Message----- From: Wolf Ruediger Spielmann Sent: Thursday, January 14, 1999 6:27 PM To: 'suse-linux@suse.de' Subject: Re:Re: HylaFAX und Creatix Modem SG144 -> Phase B error
Danke Klaus und Marc !
super Tip mit dem Heruntersetzen der Geschwindigkeit auf 19.2k !
Jetzt hab ich nämlich auch eine andere Fehlermeldung :
Das Modem hebt korrekt ab, kann sich aber mit dem REMOTE-FAX nicht auf eine Geschwindigkeit einigen... ... jedenfalls testet das REMOTE-FAX bis auf 2400Baud runter bevor es abbricht.
komplettes Log :
------------------------------------------------------ SESSION BEGIN 00000021 49521433902 <-- [4:ATA\r] --> [3:FAX] --> [5:+FCON] ANSWER: FAX CONNECTION RECV FAX: begin --> [29:+FTSI: " +49 521 43390 2"] REMOTE TSI "+49 521 43390 2" --> [22:+FDCS: 0,3,0,2,0,0,0,5] REMOTE wants 9600 bit/s REMOTE wants page width 1728 pixels in 215 mm REMOTE wants unlimited page length REMOTE wants 3.85 line/mm REMOTE wants 1-D MR --> [2:OK] <-- [7:AT+FDR\r] --> [29:+FTSI: " +49 521 43390 2"] REMOTE TSI "+49 521 43390 2" --> [29:+FTSI: " +49 521 43390 2"] REMOTE TSI "+49 521 43390 2" --> [29:+FTSI: " +49 521 43390 2"] REMOTE TSI "+49 521 43390 2" --> [29:+FTSI: " +49 521 43390 2"] REMOTE TSI "+49 521 43390 2" --> [29:+FTSI: " +49 521 43390 2"] REMOTE TSI "+49 521 43390 2" --> [8:+FHNG: 0] REMOTE HANGUP: Normal and proper end of connection (code 0) RECV FAX (00000021): recvq/fax00010.tif from +49 521 43390 2, route to <unspecified>, 0 pages in 0:36 RECV FAX: Normal and proper end of connection RECV FAX (00000021): session with +49 521 43390 2 terminated abnormally: Normal and proper end of connection RECV FAX: bin/faxrcvd "recvq/fax00010.tif" "faxmodem" "00000021" "Normal and proper end of connection" RECV FAX: end SESSION END ------------------------------------------------------
Was ich jetzt nicht verstehe : Nachdem REMOTE gesagt hat was er will und das Modem das mit OK quqittiert hat testen die beiden lustig auf TSI....
... was soll das ?
Spaeter dann kommt die zeile route to <unspecified> ... ... was soll das ?
Ich freue mich auf Antwort, weil ich jetzt schon ein Stueck weiter bin als vorher !!!!
R-)
------------------------------------------------------ Wolf Rüdiger Spielmann Fon.: +49 521 43390-0,-1 Gladbecker Str. 15 Fax.: +49 521 43390-2 33649 Bielefeld/Brackwede LAN : +49 521 43390-3 Funk: +49 171 2345811 eMail : <A HREF="mailto:RSpielmann@vsnet.de">mailto:RSpielmann@vsnet.de</A> Internet : <A HREF="http://www.vsnet.de"><A HREF="http://www.vsnet.de</A">http://www.vsnet.de</A</A>> ------------------------------------------------------
</PRE> <PRE> CountryCode: 49 AreaCode: 521 FAXNumber: +49.521.43390.2 LongDistancePrefix: 00 InternationalPrefix: 000 DialStringRules: "etc/dialrules" ServerTracing: 324319 SessionTracing: 324319 #RecvFileMode: 0600 RecvFileMode: 0666 LogFileMode: 0600 #DeviceMode: 0600 DeviceMode: 0644 RingsBeforeAnswer: 1 #SpeakerVolume: off SpeakerVolume: medium GettyArgs: "-r -b -s %l" LocalIdentifier: "wrs datentechnik" TagLineFont: etc/lutRS18.pcf TagLineFormat: "Von %l| MaxRecvPages: 250 NoCarrierRetrys: 3 # ModemType: Class2 # use class 2 interface ModemRate: 19200 ModemFlowControl: rtscts # default ModemWaitForConnect: yes # wait for CONNECT on answer # ModemResetCmds: AT&F#CID=1 ModemNoFlowCmd: AT&K0 # disable flow control cmd ModemHardFlowCmd: AT&K3 # hardware flow control cmd ModemSoftFlowCmd: AT&K4 # software flow control cmd ModemSetupDTRCmd: AT&D2 # DTR off causes modem to reset ModemSetupDCDCmd: AT&C1 # DCD follows carrier ModemSetupAACmd: AT+FCLASS=0;+FAA=1 # enable in class 0 # ModemSendFillOrder: LSB2MSB # as expected ModemRecvFillOrder: MSB2LSB # opposite of what makes sense Class2RecvDataTrigger: "\022" # a la 2388-B # #ModemAnswerFaxBeginCmd: "<19200><xon>" #wegen Phase B error code 70
participants (1)
-
RSpielmann@gmx.de