Hallo Zusammen, ich habe einen Suse 8.0-Server mit zwei Ethernet-Karten (via-rhine-Treiber). Zeitweise setzt nun die Netzwerkverbindung für ein paar Sekunden bis hin zu ein paar Minuten (knapp 20 Minuten war der "Rekord") aus. Der Server kann dann nicht mehr angepingt werden (Ziel-Host nich erreichbar). Der Fehler tritt in unregelmäßigen Abständen auf. Kürzere Ausfälle sind teilweise mehrmals täglich zu beobachten, die längeren kommen ungefähr alle 5-7 Tage vor. Folgende Meldungen finden sich nach diesen Ausfällen mehrfach in unterschiedlicher Reihenfolge im Log (komplettes Log folgt am Ende): eth0: Setting half-duplex based on MII #8 link partner capability of 0000. eth1: Setting half-duplex based on MII #8 link partner capability of 0000. eth0: Setting full-duplex based on MII #8 link partner capability of 41e1. eth1: Setting full-duplex based on MII #8 link partner capability of 41e1. sending pkt_too_big to self Meine Recherchen waren leider nicht sehr erfolgreich, offensichtlich hat es irgendwas mit dem Switch zu tun, an dem der Server hängt. Der Server hing aber vorher Monate lang ohne Probleme an dem Switch. Als dann eine Festplatte ihren Geist aufgab und ich Suse 8.0 aufgespielt habe, begann das Problem (vorher war RedHat 7.1 installiert). Ich hoffe, Ihr könnt mir helfen. Nachfolgend habe ich Euch das komplette Log sowie die Ausgabe von ifconfig beigefügt. Im Voraus vielen Dank und viele Grüße Markus dmesg: Linux version 2.4.18 (root@sk2) (gcc version 2.95.3 20010315 (SuSE)) #2 Sat Nov 2 00:59:25 CET 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Scanning bios EBDA for MXT signature On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=linux ro root=2106 Initializing CPU#0 Detected 851.956 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1697.38 BogoMIPS Memory: 513308k/524224k available (1197k kernel code, 10532k reserved, 326k data, 100k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Celeron (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb520, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) mxt_scan_bios: enter Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized ACPI: APM is already active, exiting pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: detected chipset, but driver not compiled in! PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio HPT370A: IDE controller on PCI bus 00 dev 98 PCI: Found IRQ 11 for device 00:13.0 PCI: Sharing IRQ 11 with 00:0d.0 HPT370A: chipset revision 4 HPT370A: not 100% native mode: will probe irqs later HPT370: using 33MHz PCI clock ide2: BM-DMA at 0xec00-0xec07, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0xec08-0xec0f, BIOS settings: hdg:DMA, hdh:pio hde: IC35L040AVER07-0, ATA DISK drive hdg: IC35L080AVVA07-0, ATA DISK drive ide2 at 0xdc00-0xdc07,0xe002 on irq 11 ide3 at 0xe400-0xe407,0xe802 on irq 11 blk: queue c02d431c, I/O limit 4095Mb (mask 0xffffffff) hde: safely enabled flush hde: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(44) blk: queue c02d4688, I/O limit 4095Mb (mask 0xffffffff) hdg: safely enabled flush hdg: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=159560/16/63, UDMA(100) Partition check: hde: [PTBL] [5005/255/63] hde1 hde2 < hde5 hde6 > hdg: hdg1 hdg2 hdg3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 16 devices) via-rhine.c:v1.10-LK1.1.13 Nov-17-2001 Written by Donald Becker http://www.scyld.com/network/via-rhine.html PCI: Found IRQ 11 for device 00:0d.0 PCI: Sharing IRQ 11 with 00:13.0 eth0: VIA VT6102 Rhine-II at 0xd400, 00:05:5d:09:e1:2f, IRQ 11. eth0: MII PHY found at address 8, status 0x7829 advertising 01e1 Link 45e1. PCI: Found IRQ 10 for device 00:11.0 eth1: VIA VT6102 Rhine-II at 0xd800, 00:05:5d:09:e1:1e, IRQ 10. eth1: MII PHY found at address 8, status 0x7829 advertising 01e1 Link 45e1. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Uncompressing................done. Freeing initrd memory: 873k freed VFS: Mounted root (ext2 filesystem). kmod: failed to exec /sbin/modprobe -s -k ext3, errno = 2 VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=3 Trying to unmount old root ... <3>error -16 Change root to /initrd: error -2 Freeing unused kernel memory: 100k freed Adding Swap: 1028120k swap-space (priority 42) Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide3(34,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide3(34,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide3(34,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: Setting full-duplex based on MII #8 link partner capability of 45e1. eth1: Setting full-duplex based on MII #8 link partner capability of 45e1. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present eth1: no IPv6 routers present kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide3(34,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack (4095 buckets, 32760 max) eth0: Setting half-duplex based on MII #8 link partner capability of 0000. eth1: Setting half-duplex based on MII #8 link partner capability of 0000. eth0: Setting full-duplex based on MII #8 link partner capability of 41e1. eth1: Setting full-duplex based on MII #8 link partner capability of 41e1. eth1: Setting half-duplex based on MII #8 link partner capability of 0000. eth0: Setting half-duplex based on MII #8 link partner capability of 0000. eth0: Setting full-duplex based on MII #8 link partner capability of 41e1. eth1: Setting full-duplex based on MII #8 link partner capability of 41e1. sending pkt_too_big to self sending pkt_too_big to self sending pkt_too_big to self eth0: Setting half-duplex based on MII #8 link partner capability of 0000. eth1: Setting half-duplex based on MII #8 link partner capability of 0000. eth0: Setting full-duplex based on MII #8 link partner capability of 41e1. eth1: Setting full-duplex based on MII #8 link partner capability of 41e1. sending pkt_too_big to self sending pkt_too_big to self sending pkt_too_big to self eth0: Setting half-duplex based on MII #8 link partner capability of 0000. eth1: Setting half-duplex based on MII #8 link partner capability of 0000. eth0: Setting full-duplex based on MII #8 link partner capability of 41e1. eth1: Setting full-duplex based on MII #8 link partner capability of 41e1. eth1: Setting half-duplex based on MII #8 link partner capability of 0000. eth1: Setting full-duplex based on MII #8 link partner capability of 45e1. sending pkt_too_big to self eth0: Setting half-duplex based on MII #8 link partner capability of 0000. eth1: Setting half-duplex based on MII #8 link partner capability of 0000. eth0: Setting full-duplex based on MII #8 link partner capability of 41e1. eth1: Setting full-duplex based on MII #8 link partner capability of 41e1. eth0: Setting half-duplex based on MII #8 link partner capability of 0000. eth1: Setting half-duplex based on MII #8 link partner capability of 0000. eth0: Setting full-duplex based on MII #8 link partner capability of 41e1. eth1: Setting full-duplex based on MII #8 link partner capability of 41e1. eth0: Setting half-duplex based on MII #8 link partner capability of 0000. eth1: Setting half-duplex based on MII #8 link partner capability of 0000. eth0: Setting full-duplex based on MII #8 link partner capability of 41e1. eth1: Setting full-duplex based on MII #8 link partner capability of 41e1. eth0: Setting half-duplex based on MII #8 link partner capability of 0000. eth1: Setting half-duplex based on MII #8 link partner capability of 0000. eth0: Setting full-duplex based on MII #8 link partner capability of 45e1. eth0: Setting half-duplex based on MII #8 link partner capability of 0000. eth0: Setting full-duplex based on MII #8 link partner capability of 45e1. eth0: Setting half-duplex based on MII #8 link partner capability of 0000. eth0: Setting full-duplex based on MII #8 link partner capability of 41e1. eth1: Setting full-duplex based on MII #8 link partner capability of 41e1. eth0: Setting half-duplex based on MII #8 link partner capability of 0000. eth1: Setting half-duplex based on MII #8 link partner capability of 0000. eth0: Setting full-duplex based on MII #8 link partner capability of 41e1. eth1: Setting full-duplex based on MII #8 link partner capability of 41e1. ifconfig: eth0 Link encap:Ethernet HWaddr 00:05:5D:09:E1:2F inet addr:194.9.169.2 Bcast:194.9.169.5 Mask:255.255.255.192 inet6 addr: fe80::205:5dff:fe09:e12f/10 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5397788 errors:0 dropped:0 overruns:0 frame:0 TX packets:8541918 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:422742936 (403.1 Mb) TX bytes:1927154073 (1837.8 Mb) Interrupt:11 Base address:0xd400 eth1 Link encap:Ethernet HWaddr 00:05:5D:09:E1:1E inet addr:194.9.169.3 Bcast:194.9.169.5 Mask:255.255.255.192 inet6 addr: fe80::205:5dff:fe09:e11e/10 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13071971 errors:0 dropped:0 overruns:0 frame:0 TX packets:27423 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:1116291808 (1064.5 Mb) TX bytes:1151942 (1.0 Mb) Interrupt:10 Base address:0xd800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1929184 errors:0 dropped:0 overruns:0 frame:0 TX packets:1929184 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:650800267 (620.6 Mb) TX bytes:650800267 (620.6 Mb)