teddybaer@annisonne.de schrieb:
Hallo, was hat mein Scanner denn? Kann man durch hp-check erkennen, warum er nicht scannt? Was muß ich noch angeben, was Euch zur Hilfe ist, damit Ihr mir besser helfen könnt?
Ist das so ein schwieriges Problem, das man da nichts tun kann? Ist jetzt mein Scanner hin?
Anderen wurde hier tagelang und seitenlang geholfen.
Was soll ich ich jetzt tun? Ich brauch den Scanner für meine Aufgabe in meiner Gemeinde.
Danke für Eure Hilfe im Voraus schon.
Annelie
teddybaer@annisonne.de schrieb:
Hallo, ich habe ein Problem mit meinem Scanner. Es ist ein hp 1050 Scanner. Er will nicht mehr scannen.
Ich habe suse 11.3 drauf.
Ich habe einfach mal hp-check eingegeben. Da kommen folgende Meldungen:
Jesusistdieliebe@Jesusliebtdich:~> hp-check
HP Linux Imaging and Printing System (ver. 3.10.2) Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
--------------- | SYSTEM INFO | ---------------
Basic system information: Linux Jesusliebtdich 2.6.34.10-0.6-desktop #1 SMP PREEMPT 2011-12-13 18:27:38 +0100 i686 i686 i386 GNU/Linux
Distribution: suse 11.3
Checking Python version... OK, version 2.6.5 installed
Checking PyQt 4.x version... OK, version 4.7.3 installed.
Checking for CUPS... Status: Scheduler ist aktiv Version: 1.4.4 error_log is set to level: warn
Checking for dbus/python-dbus... dbus daemon is running. python-dbus version: 0.83.0
------------------------------------ | COMPILE AND RUNTIME DEPENDENCIES | ------------------------------------
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c). note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System... OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files... OK, found.
Checking for dependency: CUPS image - CUPS image development files... OK, found.
Checking for dependency: DBus - Message bus system... OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler... OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer... OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library... OK, found.
Checking for dependency: libjpeg - JPEG library... OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files... OK, found.
Checking for dependency: libpthread - POSIX threads library... OK, found.
Checking for dependency: libtool - Library building support services... OK, found.
Checking for dependency: libusb - USB library... OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs... OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)... OK, found.
Checking for dependency: PolicyKit - Administrative policy framework... OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4... OK, found.
Checking for dependency: Python DBus - Python bindings for DBus... OK, found.
Checking for dependency: Python devel - Python development files... OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications... OK, found.
Checking for dependency: Python XML libraries... OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality... OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language... OK, found.
Checking for dependency: Reportlab - PDF library for Python... OK, found.
Checking for dependency: SANE - Scanning library... OK, found.
Checking for dependency: SANE - Scanning library development files... OK, found.
Checking for dependency: scanimage - Shell scanning program... OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE... OK, found.
---------------------- | HPLIP INSTALLATION | ----------------------
Currently installed HPLIP version... HPLIP 3.10.2 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure.
[hplip] version=3.10.2
[dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/cups/model/manufacturer-PPDs/hplip ppdbase=/usr/share/cups/model/manufacturer-PPDs doc=/usr/share/doc/packages/hplip icon=/usr/share/applications cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/lib/cups/driver
# Following values are determined at configure time and cannot be changed. [configure] network-build=yes pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=no foomatic-ppd-install=yes foomatic-rip-hplip-install=yes hpcups-install=yes cups-drv-install=no cups-ppd-install=yes internal-tag=3.10.2rc1.9 restricted-build=no ui-toolkit=qt4 qt3=no qt4=yes policy-kit=no hpijs-only-build=no lite-build=no udev-acl-rules=no hpcups-only-build=no hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file: # hplip.state - HPLIP runtime persistent variables.
[plugin] installed=0 eula=0
Current contents of '~/.hplip/hplip.conf' file: [last_used] printer_name = working_dir = . device_uri = "hp:/usb/psc_1100_series?serial=MY388F909BB0"
[commands] scan = /usr/bin/xsane -V %SANE_URI%
[installation] version = 3.10.2rc1.9 date_time = 22.03.2012 07:03:35
[settings] systray_messages = 0 systray_visible = 0
[fax] email_address = voice_phone =
[refresh] rate = 30 enable = false type = 1
[polling] enable = false device_list = interval = 5
-------------------------- | DISCOVERED USB DEVICES | --------------------------
No devices found.
--------------------------------- | INSTALLED CUPS PRINTER QUEUES | ---------------------------------
Deskjet ------- Type: Unknown Device URI: parallel:/dev/lp0 PPD: /etc/cups/ppd/Deskjet.ppd PPD Description: HP Deskjet 1050 j410 Series, hpcups 3.11.10 Printer status: Drucker „Deskjet“ ist inaktiv; aktiviert seit Mi 21 Mär 2012 16:20:49 CET warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
Deskjet-1050-J410-series ------------------------ Type: Unknown Device URI: usb://HP/Deskjet%201050%20J410%20series?serial=CN1343J1D805HW PPD: /etc/cups/ppd/Deskjet-1050-J410-series.ppd PPD Description: HP Deskjet 1050 j410 Series, hpcups 3.11.10 Printer status: Drucker „Deskjet-1050-J410-series“ ist inaktiv; aktiviert seit Mi 21 Mär 2012 17:27:32 CET warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
---------------------- | SANE CONFIGURATION | ----------------------
'hpaio' in '/etc/sane.d/dll.conf'... OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
--------------------- | PYTHON EXTENSIONS | ---------------------
Checking 'cupsext' CUPS extension... OK, found.
Checking 'pcardext' Photocard extension... OK, found.
Checking 'hpmudext' I/O extension... OK, found.
Checking 'scanext' SANE scanning extension... OK, found.
----------------- | USB I/O SETUP | -----------------
Checking for permissions of USB attached printers...
HP Device 0x8911 at 001:002: Device URI: hp:/usb/Deskjet_1050_J410_series?serial=CN1343J1D805HW
HP Linux Imaging and Printing System (ver. 3.10.2) System Tray Status Service ver. 2.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details.
/usr/lib/python2.6/site-packages/gtk-2.0/gtk/__init__.py:127: RuntimeWarning: PyOS_InputHook is not availa of PyGTK set_interactive(1) error: Unsupported model: Deskjet_1050_J410_series
--------------- | USER GROUPS | ---------------
users sys lp
----------- | SUMMARY | -----------
error: 2 errors and/or warnings.
Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html
Done. Jesusistdieliebe@Jesusliebtdich:~> error: No system tray detected on this system. Unable to start, exiting Jesusistdieliebe@Jesusliebtdich:~>
Was kann ich tun, damit mein Scanner wieder scannt?
Annelie
hallo Benutze nicht den Namen Gottes für Spielchen auf dem PC! Wenn wieder hp-check ausgeführt wird, dann als "hp-check -c" Was Sane anbetriefft wird doch in obigem Scan angezeigt, daß *.dev-Datei(en) fehlt/fehlen. Installiere alle sane mit Endung *.dev Ernst -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org