![](https://seccdn.libravatar.org/avatar/363424a7062b0e7a90527600f3760d46.jpg?s=120&d=mm&r=g)
Hallo, Am Don, 05 Okt 2006, Jens Nixdorf schrieb:
Am Donnerstag, 5. Oktober 2006 13:58 schrieb David Haller:
Ich meinte eher, dass du mal nach Plattendefekten schaust, also erstmal mit 'smartctl' was die Platte selber dazu sagt und dann mal mit badblocks.
smartctl -h sagt "PASSED",
-h, --help, --usage Prints a usage message to STDOUT and exits. Meintest du 'smartctl -H'? Das ist nicht sehr Aussagekraeftig. Schau dir mal die Ausgabe von 'smartctl -A' an. Eventuell auch die von 'smartctl -a' die die Ausgabe von -A nochmal enthaelt. In der Ausgabe sind v.a. die folgenden Werte interessant: Raw_Read_Error_Rate, Reallocated_Sector_Ct, Reallocated_Event_Count, Current_Pending_Sector und Offline_Uncorrectable(?). Evtl. auch noch Seek_Error_Rate, Temperature_Celsius, Hardware_ECC_Recovered, UDMA_CRC_Error_Count, Multi_Zone_Error_Rate und Soft_Read_Error_Rate
und badblocks sagt auch: Checking for bad blocks (read-only test): done 864 Pass completed, 0 bad blocks found.
Aber das ist schonmal gut, wenn badblocks nichts findet.
Also nochmal Glück gehabt, denke ich.
Ja.
Was bedeutet eigentlich diese 864 bei badblocks?
Weiss ich auch nicht, ich nehme immer 'e2fsck -c' :) -dnh -- Och yes. I used to have a brain once. If anyone sees it, please ask it to come back, I miss it sometimes. -- Frossie