Also nun wird's wirklich verrückt... Ich habe den Kernel + Sourcen aus dem Factory-Zweig von 11.2 installiert und gebootet. 'uname -a' liefert nun also: Linux btpbx6 2.6.27.29-0.1-default #1 SMP 2009-08-15 17:53:59 +0200 x86_64 x86_64 x86_64 GNU/Linux Was ich nun beim Start von X-Window bekomme ist ein schwarzer Bildschirm mit einem Cursor-Kreuz, das sich auch bewegen läßt. Sonst leider nichts. Habe ich jetzt etwa die Probleme mit X-Window gelöst und darf an KDE weiterbasteln?? Da, wie ich leider erst jetzt erfahren habe, die Sache doch nicht so zeitkritisch ist werde ich wohl doch lieber auf die Final von 11.2 warten (bzw. für den Übergang die Beta nutzen)... Auf jeden Fall vielen Dank für die wirklich viele Mühe, die Du Dir mit dem Problem gemacht hast. Viele Grüße Klaus PS: Wie immer... Hier die xorg-Logdatei: This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.6.3.901 (1.6.4 RC 1) Release Date: 2009-8-25 X Protocol Version 11, Revision 0 Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux btpbx6 2.6.27.29-0.1-default #1 SMP 2009-08-15 17:53:59 +0200 x86_64 Build Date: 15 September 2009 12:47:42AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 20 17:41:36 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "<default monitor>" (==) No device specified for screen "Default Screen Section". Using the first device section listed. (**) | |-->Device "Device[0]" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (**) Option "ZapWarning" "on" (**) Option "AllowMouseOpenFail" "on" (**) Option "AIGLX" "off" (**) Option "AutoAddDevices" "on" (**) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/TTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/truetype/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, built-ins (**) Input device list set to "/dev/gpmdata,/dev/input/mice" (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules" (**) Extension "Composite" is enabled (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0x3f7c0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (--) using VT number 7 (--) PCI:*(0:0:2:0) 8086:2a42:10cf:1458 rev 7, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8 (--) PCI: (0:0:2:1) 8086:2a43:10cf:1458 rev 7, Mem @ 0xf2400000/1048576 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules//extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules//extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules//extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (**) AIGLX disabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules//extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules//extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib64/xorg/modules//extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib64/xorg/modules//drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 2.8.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D, IGDNG_M (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib64/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (EE) intel(0): [drm] Failed to detect GEM. Kernel 2.6.28 required. (EE) intel(0): Failed to become DRM master. (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset (--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xF2000000 size 4194304 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (II) intel(0): No SDVO device is found in VBT (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA has no monitor section (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0 (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): No SDVO device found on SDVOB (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed. (II) intel(0): Output HDMI-1 has no monitor section (II) intel(0): I2C bus "HDMIDDC_B" initialized. (II) intel(0): HDMI output 1 detected (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Output HDMI-2 has no monitor section (II) intel(0): I2C bus "HDMIDDC_C" initialized. (II) intel(0): HDMI output 2 detected (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Output HDMI-1 disconnected (II) intel(0): Output HDMI-2 disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS using initial mode 1280x800 (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 32764 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009 (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000120 to 0x30000120 (WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0xa102d800 to 0x3e006f00 (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 1248000 total, 1 used (II) intel(0): I830CheckAvailableMemory: 4991996 kB available (WW) intel(0): DRI2: failed to open drm device (**) intel(0): Framebuffer compression enabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (EE) intel(0): Failed to initialize kernel memory manager (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (WW) intel(0): drmSetMaster failed: Bad file descriptor (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00083fff: compressed frame buffer (400 kB, 0x00000000be020000 physical ) (II) intel(0): 0x00084000-0x0008dfff: HW cursors (40 kB) (II) intel(0): 0x0008e000-0x0088dfff: fake bufmgr (8192 kB) (II) intel(0): 0x0088e000-0x00c75fff: front buffer (4000 kB) X tiled (II) intel(0): 0x00c76000-0x00c76fff: power context (4 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): using SSC reference clock of 96 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): direct rendering: Failed (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) intel(0): Setting screen physical size to 338 x 211 (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/hal: Adding input device PS/2 Generic Mouse (II) LoadModule: "evdev" (II) Loading /usr/lib64/xorg/modules//input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 2.2.5 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) PS/2 Generic Mouse: always reports core events (**) PS/2 Generic Mouse: Device: "/dev/input/event1" (II) PS/2 Generic Mouse: Found 3 mouse buttons (II) PS/2 Generic Mouse: Found x and y relative axes (II) PS/2 Generic Mouse: Configuring as mouse (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE) (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1 (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00 (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms (**) PS/2 Generic Mouse: (accel) set acceleration profile 0 (II) PS/2 Generic Mouse: initialized for relative axes. (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad (II) LoadModule: "synaptics" (II) Loading /usr/lib64/xorg/modules//input/synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.1.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) Synaptics touchpad driver version 1.1.3 (**) Option "Device" "/dev/input/event2" (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0 (II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple (**) Option "SHMConfig" "on" (**) Option "HorizScrollDelta" "0" (--) SynPS/2 Synaptics TouchPad: touchpad found (**) SynPS/2 Synaptics TouchPad: always reports core events (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00 (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0 (--) SynPS/2 Synaptics TouchPad: touchpad found (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Fujitsu FUJ02B1 (**) Fujitsu FUJ02B1: always reports core events (**) Fujitsu FUJ02B1: Device: "/dev/input/event7" (II) Fujitsu FUJ02B1: Found keys (II) Fujitsu FUJ02B1: Configuring as keyboard (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event10" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Fujitsu FUJ02E3 (**) Fujitsu FUJ02E3: always reports core events (**) Fujitsu FUJ02E3: Device: "/dev/input/event8" (II) Fujitsu FUJ02E3: Found keys (II) Fujitsu FUJ02E3: Configuring as keyboard (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) PS/2 Generic Mouse: Close (II) UnloadModule: "evdev" (II) UnloadModule: "synaptics" (II) AT Translated Set 2 keyboard: Close (II) UnloadModule: "evdev" (II) Fujitsu FUJ02B1: Close (II) UnloadModule: "evdev" (II) Video Bus: Close (II) UnloadModule: "evdev" (II) Fujitsu FUJ02E3: Close (II) UnloadModule: "evdev" (WW) intel(0): drmDropMaster failed: Bad file descriptor (II) Open ACPI successful (/var/run/acpid.socket) (II) APM registered successfully (II) intel(0): Kernel reported 1248000 total, 1 used (II) intel(0): I830CheckAvailableMemory: 4991996 kB available (WW) intel(0): DRI2: failed to open drm device (**) intel(0): Framebuffer compression enabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (EE) intel(0): Failed to initialize kernel memory manager (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (II) intel(0): Initializing HW Cursor (WW) intel(0): drmSetMaster failed: Bad file descriptor (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00083fff: compressed frame buffer (400 kB, 0x00000000be020000 physical ) (II) intel(0): 0x00084000-0x0008dfff: HW cursors (40 kB) (II) intel(0): 0x0008e000-0x0088dfff: fake bufmgr (8192 kB) (II) intel(0): 0x0088e000-0x00c75fff: front buffer (4000 kB) X tiled (II) intel(0): 0x00c76000-0x00c76fff: power context (4 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): using SSC reference clock of 96 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): direct rendering: Failed (--) RandR disabled (II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) intel(0): Setting screen physical size to 338 x 211 (EE) XKB: No components provided for device Virtual core keyboard (WW) Couldn't load XKB keymap, falling back to pre-XKB keymap (II) config/hal: Adding input device PS/2 Generic Mouse (**) PS/2 Generic Mouse: always reports core events (**) PS/2 Generic Mouse: Device: "/dev/input/event1" (II) PS/2 Generic Mouse: Found 3 mouse buttons (II) PS/2 Generic Mouse: Found x and y relative axes (II) PS/2 Generic Mouse: Configuring as mouse (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1 (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00 (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms (**) PS/2 Generic Mouse: (accel) set acceleration profile 0 (II) PS/2 Generic Mouse: initialized for relative axes. (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad (II) Synaptics touchpad driver version 1.1.3 (**) Option "Device" "/dev/input/event2" (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0 (II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple (**) Option "SHMConfig" "on" (**) Option "HorizScrollDelta" "0" (--) SynPS/2 Synaptics TouchPad: touchpad found (**) SynPS/2 Synaptics TouchPad: always reports core events (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00 (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0 (--) SynPS/2 Synaptics TouchPad: touchpad found (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Fujitsu FUJ02B1 (**) Fujitsu FUJ02B1: always reports core events (**) Fujitsu FUJ02B1: Device: "/dev/input/event7" (II) Fujitsu FUJ02B1: Found keys (II) Fujitsu FUJ02B1: Configuring as keyboard (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event10" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Fujitsu FUJ02E3 (**) Fujitsu FUJ02E3: always reports core events (**) Fujitsu FUJ02E3: Device: "/dev/input/event8" (II) Fujitsu FUJ02E3: Found keys (II) Fujitsu FUJ02E3: Configuring as keyboard (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm Manfred Tremmel schrieb:
Am Freitag, 18. September 2009 schrieb Klaus Becker:
der Witz ist halt nur, daß bei der Beta von OpenSuse 11.2 alles ohne Probleme läuft...
Nur sind dort halt alle möglichen anderen Programme so Beta, daß sie teilweise sehr instabil laufen.
Dann installier doch einfach mal nur den Kernel der 11.2 aus dem Factory Zweig. Ich hatte den auch länger unter 11.1 am laufen, mittlerweile bin ich aber direkt auf factory umgestiegen.
-- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org