Am Sonntag, 20. Juni 2004 14:37 schrieb Heiko Möller:
Al Bogner <suse-linux@ml04q2.pinguin.uni.cc> schrieb:
Am Sonntag, 20. Juni 2004 13:29 schrieb Heiko Möller:
Also sollten xfs-User vermutlich momentan kein Kernel-Update machen!
Ich vermute auch, dass man lit. anderen Listen bei ISDN und sehr
lit?
alten Rechner mit kleinen HDs (2GB?) vorsichtig sein soll.
Die Rechner hier mit 8GB-HDs und Celeron 800/1000 zeigten keine Probleme nach dem Update.
Ich hab hier mit einem Pentium 1 166 MHz mit 850 MB HDD auch keine Probleme. Allerdings verwende ich da auch kein xfs-fs. Es liegt also IMHO nicht am Alter des Rechners und auch nicht an der Größe des HDDs.
Mich hat es nun auch bei einem Rechner erwischt, den ich sowieso wegen Filesystem-Änderung neu aufsetzen wollte :-) Ich sehe beim Booten noch /dev/hda6 und /dev/hda8 und dann hängt der Rechner. Filesystem Type Size Used Avail Use% Mounted on /dev/hda9 ext3 5.4G 4.8G 327M 94% / tmpfs tmpfs 126M 12K 126M 1% /dev/shm /dev/hda6 ext2 31M 5.4M 24M 19% /boot /dev/hda5 vfat 901M 309M 592M 35% /burn /dev/hdb8 vfat 2.5G 546M 2.0G 22% /dae /dev/hdb7 vfat 603M 872K 602M 1% /daten /dev/hda8 ext3 487M 129M 333M 28% /home /dev/hdb9 vfat 5.3G 1.8G 3.5G 35% /install 192.168.1.100:/install nfs 7.8G 7.0G 407M 95% /install_nfs 192.168.1.100:/shared nfs 2.0G 1.4G 514M 74% /shared_nfs Das sind/waren die Daten vor dem Update von hwinfo: cpu: Celeron (Coppermine), 800 MHz keyboard: /dev/input/event2 AT Translated Set 2 keyboard AT Translated Set 2 keyboard mouse: /dev/input/mice ImPS/2 Logitech Wheel Mouse monitor: PANASONIC P70 graphics card: nVidia GeForce4 MX 440 framebuffer: NVidia NV17 () Board sound: Ensoniq ES1370 [AudioPCI] storage: Floppy disk controller Intel 82801BA IDE U100 network: 3Com 3C905B Fast Etherlink XL 10/100 network interface: eth0 Ethernet network interface lo Loopback network interface sit0 Network Interface disk: /dev/hda IBM-DTTA-351010 /dev/hdb QUANTUM FIREBALLlct08 26 partition: /dev/hda1 Partition /dev/hda2 Partition /dev/hda5 Partition /dev/hda6 Partition /dev/hda7 Partition /dev/hda8 Partition /dev/hda9 Partition /dev/hdb1 Partition /dev/hdb5 Partition /dev/hdb6 Partition /dev/hdb7 Partition /dev/hdb8 Partition /dev/hdb9 Partition cdrom: /dev/by-path/pci-0000:00:1f.1-ide-1:0 ATAPI CD-RW 48XMax /dev/by-path/pci-0000:00:1f.1-ide-1:1 NEC CD-ROM DRIVE:282 floppy: /dev/fd0 Floppy Disk usb controller: Intel 82801BA/BAM USB (Hub #1) Intel 82801BA/BAM USB (Hub #2) bios: BIOS bridge: Intel 82815 815 Chipset Host Bridge and Memory Controller Hub Intel 82815 815 Chipset AGP Bridge Intel 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge Intel 82801BA ISA Bridge (LPC) hub: Linux 2.6.4-54.5-default uhci_hcd UHCI Host Controller Linux 2.6.4-54.5-default uhci_hcd UHCI Host Controller memory: Main Memory unknown: FPU DMA controller PIC Timer RTC Keyboard controller /dev/lp0 Parallel controller PS/2 Controller Intel 82801BA/BAM SMBus /dev/ttyS0 16550A /dev/ttyS1 16550A Es folgt eine boot.msg vor dem Update. Eine dmesg ist auch vorhanden, sowie weitere Systeminformationen. Inspecting /boot/System.map-2.6.4-54.5-default Loaded 23440 symbols from /boot/System.map-2.6.4-54.5-default. Symbols match kernel version 2.6.4. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.6.4-54.5-default (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 Fri May 7 21:43:10 UTC 2004 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) <4> BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) <4> BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) <4> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) <5>757MB vmalloc/ioremap area available. <5>0MB HIGHMEM available. <5>255MB LOWMEM available. <4>On node 0 totalpages: 65520 <4> DMA zone: 4096 pages, LIFO batch:1 <4> Normal zone: 61424 pages, LIFO batch:14 <4> HighMem zone: 0 pages, LIFO batch:1 <6>DMI 2.2 present. <6>ACPI: RSDP (v000 IntelR ) @ 0x000f6750 <6>ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000 <6>ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040 <6>ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 <6>ACPI: PM-Timer IO Port: 0x4008 <6>ACPI: local apic disabled <4>Built 1 zonelists <4>Kernel command line: root=/dev/hda9 vga=normal ide=nodma desktop resume=/dev/hda7 splash=silent <6>ide_setup: ide=nodmaIDE: Prevented DMA <6>bootsplash: silent mode. <6>Initializing CPU#0 <4>PID hash table entries: 1024 (order 10: 8192 bytes) <4>CKRM Initialized <4>Detected 801.979 MHz processor. <6>Using pmtmr for high-res timesource <4>Console: colour VGA+ 80x25 <6>Memory: 255016k/262080k available (1970k kernel code, 6344k reserved, 677k data, 212k init, 0k highmem) <4>Checking if this processor honours the WP bit even in supervisor mode... Ok. <4>Calibrating delay loop... 1589.24 BogoMIPS <6>Security Scaffold v1.0.0 initialized <6>SELinux: Initializing. <6>SELinux: Starting in permissive mode <6>There is already a security framework initialized, register_security failed. <6>Failure registering capabilities with the kernel <6>selinux_register_security: Registering secondary module capability <6>Capability LSM initialized <6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) <4>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) <4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes) <6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd <6>Looking for DSDT in initrd ...No customized DSDT found in initrd! <6>Freeing initrd memory: 1079k freed <7>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 <7>CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 128K <7>CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <4>CPU: Intel Celeron (Coppermine) stepping 0a <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>do_initcalls <4>init_elf_binfmt <6>NET: Registered protocol family 16 <6>PCI: PCI BIOS revision 2.10 entry at 0xfb1d0, last bus=2 <6>PCI: Using configuration type 1 <6>mtrr: v2.0 (20020519) <6>ACPI: Subsystem revision 20040326 <6>No customized DSDT found! <4>ACPI: IRQ9 SCI: Level Trigger. <6>ACPI: Interpreter enabled <6>ACPI: Using PIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <4> ... the first call_usermodehelper: pci_bus <4>Transparent bridge - 0000:00:1e.0 <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15) <6>Linux Plug and Play Support v0.97 (c) Adam Belay <4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 <4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 <4>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 <4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 <6>PCI: Using ACPI for IRQ routing <6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' <6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) <5>apm: overridden by ACPI. <4>Initial HugeTLB pages allocated: 0 <6>ikconfig 0.7 with /proc/config* <5>VFS: Disk quotas dquot_6.5.1 <6>SELinux: Registering netfilter hooks <6>Initializing Cryptographic API <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Real Time Clock Driver v1.12 <6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <4>Using anticipatory io scheduler <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>loop: loaded (max 8 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>ICH2: IDE controller at PCI slot 0000:00:1f.1 <6>ICH2: chipset revision 2 <6>ICH2: not 100%% native mode: will probe irqs later <6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA <6> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA <4>hda: IBM-DTTA-351010, ATA DISK drive <4>hdb: QUANTUM FIREBALLlct08 26, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>hdc: ATAPI CD-RW 48XMax, ATAPI CD/DVD-ROM drive <4>hdd: NEC CD-ROM DRIVE:282, ATAPI CD/DVD-ROM drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hda: max request size: 128KiB <6>hda: 19807200 sectors (10141 MB) w/466KiB Cache, CHS=19650/16/63 <6> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > <4>hdb: max request size: 128KiB <6>hdb: 50859648 sectors (26040 MB) w/418KiB Cache, CHS=50456/16/63 <6> hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 hdb9 > <4>ide-floppy driver 0.99.newide <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>input: AT Translated Set 2 keyboard on isa0060/serio0 <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>NET: Registered protocol family 2 <6>IP: routing cache hash table of 2048 buckets, 16Kbytes <6>TCP: Hash tables configured (established 16384 bind 32768) <6>NET: Registered protocol family 1 <6>NET: Registered protocol family 8 <6>NET: Registered protocol family 20 <4>Resume Machine: resuming from /dev/hda7 <4>Resuming from device hda7 <3>Resume Machine: This is normal swap space <7>PM: Reading pmdisk image. <7>PM: Resume from disk failed. <6>ACPI: (supports S0 S1 S4 S5) <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <5>RAMDISK: Compressed image found at block 0 <4>VFS: Mounted root (ext2 filesystem). <6>kjournald starting. Commit interval 5 seconds <6>EXT3-fs: mounted filesystem with ordered data mode. <4>VFS: Mounted root (ext3 filesystem) readonly. <5>Trying to move old root to /initrd ... failed <5>Unmounting old root <5>Trying to free ramdisk memory ... okay <6>Freeing unused kernel memory: 212k freed <6>Adding 136512k swap on /dev/hda7. Priority:42 extents:1 <6>EXT3 FS on hda9, internal journal <6>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <4>spurious 8259A interrupt: IRQ7. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda8, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>subfs 0.9 <4>hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache <6>Uniform CD-ROM driver Revision: 3.20 <4>hdd: ATAPI 40X CD-ROM drive, 128kB Cache Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Sat Jun 19 12:44:26 2004 <notice>run boot scripts (setserial boot.proc) Configuring serial ports... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A /dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports done<notice>exit status of (setserial boot.proc) is (0 0) <notice>run boot scripts (boot.shm) Mounting shared memory FS on /dev/shmdone <notice>exit status of (boot.shm) is (0) <notice>run boot scripts (boot.rootfsck) Activating swap-devices in /etc/fstab... doneChecking root file system... fsck 1.34 (25-Jul-2003) /dev/hda9: clean, 243124/716672 files, 1277079/1431785 blocks done<notice>exit status of (boot.rootfsck) is (0) <notice>run boot scripts (boot.md boot.device-mapper) Activating device mapper... Creating /dev/mapper/control character device with major:10 minor:63. done <notice>exit status of (boot.md boot.device-mapper) is (0 0) <notice>run boot scripts (boot.localfs) Checking file systems... fsck 1.34 (25-Jul-2003) /dev/hda6: clean, 38/8032 files, 6531/32096 blocks /dev/hda8: clean, 3486/128520 files, 147414/514048 blocks doneSetting updone Mounting local file systems... proc on /proc type proc (rw) tmpfs on /dev/shm type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda6 on /boot type ext2 (rw,acl,user_xattr) /dev/hda5 on /burn type vfat (rw,gid=1000,umask=002) /dev/hdb8 on /dae type vfat (rw,gid=1000,umask=002) /dev/hdb7 on /daten type vfat (rw,gid=1000,umask=002) /dev/hda8 on /home type ext3 (rw,acl,user_xattr) /dev/hdb9 on /install type vfat (rw,gid=1000,umask=002) /dev/hdc on /media/cdrecorder type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8) /dev/hdd on /media/cdrom type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8) /dev/fd0 on /media/floppy type subfs (rw,nosuid,nodev,sync,fs=floppyfss,procuid) done<notice>exit status of (boot.localfs) is (0) <notice>run boot scripts (boot.crypto) <notice>exit status of (boot.crypto) is (0) <notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) Loading required kernel modules doneRestore device permissionsdone Activating remaining swap-devices in /etc/fstab... done<notice>exit status of (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) is (0 0 0 0) <notice>run boot scripts (boot.idedma boot.clock) Setting up IDE DMA mode /dev/hda: setting using_dma to 1 (on) using_dma = 1 (on) /dev/hdc: setting using_dma to 1 (on) using_dma = 1 (on) /dev/hdd: setting using_dma to 1 (on) using_dma = 1 (on) done Setting up the CMOS clockdone <notice>exit status of (boot.idedma boot.clock) is (0 0) <notice>run boot scripts (boot.ldconfig) Setting up timezone datadone <notice>exit status of (boot.ldconfig) is (0) <notice>run boot scripts (boot.sched boot.localnet boot.isapnp) Setting scheduling timeslices unused Setting up hostname 'client8'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 done <notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0) <notice>run boot scripts (boot.klog boot.ipconfig) Enabling syn flood protectiondone Disabling IP forwardingdone Creating /var/log/boot.msg done<notice>killproc: kill(289,29) <notice>exit status of (boot.klog boot.ipconfig) is (0 0) System Boot Control: The system has been set up Skipped features: boot.sched System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(289,3) INIT: Boot logging started on /dev/tty1(/dev/console) at Sat Jun 19 10:44:39 2004 Master Resource Control: previous runlevel: N, switching to runlevel: 5 <notice>Entering runlevel: 5 start services (random isdn hotplug) Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done Initializing random number generatordone <notice>exit status of (random isdn hotplug) is (0 0 0) <notice>start services (coldplug) coldplug scanning input: done scanning pci: ****.***WW*done scanning usb: done . . . . . . . . . . . . . . . . . . . . . . . .done <notice>exit status of (coldplug) is (0) <notice>start services (network) Setting up network interfaces: lo lo IP address: 127.0.0.1/8 done eth0 device: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24) eth0 configuration: eth-id-00:10:4b:69:4f:af eth0 IP address: 192.168.1.108/24 doneSetting up service network . . . . . . . . . . . . . . . .done <notice>exit status of (network) is (0) <notice>start services (syslog) Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/ntp/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=normal RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/sbin/syslogd ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=normal RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/sbin/klogd ] done <notice>exit status of (syslog) is (0) <notice>start services (smbfs) Mount SMB/ CIFS File Systems unused <notice>exit status of (smbfs) is (6) <notice>start services (splash_early smartd resmgr portmap) <notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=normal RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/smartd ] <notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=normal RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/sbin/resmgrd ] <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=normal RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/sbin/portmap ] Starting RPC portmap daemondone Starting smartddone Starting resource managerdone <notice>exit status of (splash_early smartd resmgr portmap) is (0 0 0 0) <notice>start services (nfsboot nfs) Starting nfsboot (sm-notify) done Importing Net File System (NFS)done <notice>exit status of (nfsboot nfs) is (0 0) <notice>start services (sshd running-kernel powersaved fbset amavis alsasound) <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=normal RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] <notice>startproc: execve (/usr/sbin/amavisd) [ /usr/sbin/amavisd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=normal RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/amavisd ] Starting SSH daemondone Starting virus-scanner (amavisd-new):done Starting sound driver: ens1370done <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -e /etc/powersave.conf -a resmgr -v 3 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=normal RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ] Restoring the previous sound settingdone loading ACPI modules (ac battery button fan processor thermal ) Starting powersaved done <notice>exit status of (sshd running-kernel powersaved fbset amavis alsasound) is (0 0 0 0 0 0) <notice>start services (splash postfix kbd cups) <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=39 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=normal RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] Starting cupsddone Starting mail service (Postfix)done Loading keymap qwertz/de-latin1-nodeadkeys.map.gz doneLoading compose table latin1.adddone Start Unicode mode doneLoading console font lat9w-16.psfu -m trivial (K done<notice>exit status of (splash postfix kbd cups) is (5 0 0 0) <notice>start services (nscd hwscan cron) Starting hardware scan on boot<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=43 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=normal RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/cron ] <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=43 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=normal RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting CRON daemondone Starting Name Service Cache Daemondone <notice>exit status of (nscd hwscan cron) is (0 0 0) <notice>start services (xdm splash_late) Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= http_proxy=http://192.168.1.99:3128/ progress=46 INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm ftp_proxy=http://192.168.1.99:3128/ REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=normal RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=25 SHLVL=2 XCURSOR_THEME=crystalwhite no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE.UTF-8 splash=silent sscripts=47 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] done <notice>exit status of (xdm splash_late) is (0 0) Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: smbfs splash <notice>killproc: kill(742,3) Al