Das sieht gut aus. Ich denke es liegt an irgendwas anderem.
Ist in "dmesg" irgendwas auffaelliges?
Ich kann in der Aushabe nichts schlimmes entdecken. Ich habe Sie nochmal angehängt: Linux version 2.6.16.21-0.13-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Mon Jul 17 17:22:44 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data) BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 767MB LOWMEM available. found SMP MP-table at 000fbc70 On node 0 totalpages: 196592 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 192496 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. IO/L-APIC allowed because system is MP or new enough ACPI: RSDP (v000 AMI ) @ 0x000fab80 ACPI: RSDT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x2fff0000 ACPI: FADT (v001 AMIINT SiS740XX 0x00000011 MSFT 0x0100000b) @ 0x2fff0030 ACPI: MADT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x2fff00c0 ACPI: DSDT (v001 SiS 746 0x00000100 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000) Built 1 zonelists Kernel command line: root=/dev/hda3 vga=0x31a resume=/dev/hda2 splash=silent bootsplash: silent mode. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1833.302 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 773800k/786368k available (1489k kernel code, 11996k reserved, 609k data, 156k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3669.98 BogoMIPS (lpj=7339976) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 2500+ stepping 00 Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 2350k freed not found! ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Uncovering SIS963 that hid as a SIS503 (compatible=0) Enabling SiS 96x SMBus. Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) Setting up standard PCI resources PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: c5d00000-c7efffff PREFETCH window: c1a00000-c5bfffff apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1153989009.580:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xc2000000, mapped to 0xf0880000, using 4096k, total 4096k vesafb: mode is 1280x1024x16, linelength=2560, pages=0 vesafb: protected mode interface info at c000:02e5 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76045 bytes,<6> does not fit into framebuffer. ...found (1280x1024, 33692 bytes, v3). Console: switching to colour frame buffer device 156x60 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Using IPI Shortcut mode ACPI wakeup devices: PCI0 PS2K UAR1 USB1 USB2 EHCI LAN MDM ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 156k freed Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: WDC WD1200JB-00FUA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 512KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 Probing IDE interface ide1... hdc: AOPEN COM5232/AAH PRO, ATAPI CD/DVD-ROM drive hdd: WDC WD153BA, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hdd: max request size: 128KiB hdd: 30043440 sectors (15382 MB) w/2048KiB Cache, CHS=29805/16/63, UDMA(66) hdd: cache flushes not supported hdd: hdd1 Attempting manual resume ReiserFS: hda3: found reiserfs format "3.6" with standard journal ReiserFS: hda3: using ordered data mode reiserfs: using flush barriers ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names Adding 530136k swap on /dev/hda2. Priority:-1 extents:1 across:530136k parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] lp0: using parport0 (interrupt-driven). gameport: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x200, speed 2057kHz hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Linux Tulip driver version 1.1.14-NAPI (May 31, 2006) usbcore: registered new driver usbfs usbcore: registered new driver hub i2c-sis96x version 1.0.0 sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 169 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:03.0: irq 169, io mem 0xcfffd000 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.16.21-0.13-default ohci_hcd usb usb1: SerialNumber: 0000:00:03.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected Linux agpgart interface v0.101 (c) Dave Jones sis900.c: v1.08.09 Sep. 19 2005 ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 177 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.1: irq 177, io mem 0xcfffe000 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.16.21-0.13-default ohci_hcd usb usb2: SerialNumber: 0000:00:03.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected usb 1-1: new low speed USB device using ohci_hcd and address 2 ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 185 ehci_hcd 0000:00:03.2: EHCI Host Controller PCI: cache line size of 64 is not supported by device 0000:00:03.2 ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:03.2: irq 185, io mem 0xcffff000 ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.16.21-0.13-default ehci_hcd usb usb3: SerialNumber: 0000:00:03.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected pci_hotplug: PCI Hot Plug PCI Core version: 0.5 hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest } ide: failed opcode was: unknown agpgart: Detected SiS 746 chipset agpgart: AGP aperture is 64M @ 0xd0000000 hda: status error: status=0x58 { DriveReady SeekComplete DataRequest } ide: failed opcode was: unknown hda: drive not ready for command ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 193 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. 0000:00:04.0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 193, 00:0b:6a:1d:46:a5. usb 1-1: device not accepting address 2, error -110 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 hda: CHECK for good STATUS ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 201 hdc: CHECK for good STATUS usb 1-1: new low speed USB device using ohci_hcd and address 4 usb 1-1: new device found, idVendor=046d, idProduct=c501 usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB Receiver usb 1-1: Manufacturer: Logitech usb 1-1: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Logitech USB Receiver as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:03.0-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com dm-netlink version 0.0.2 loaded loop: loaded (max 8 devices) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found eth0: Media Link On 100mbps full-duplex audit(1153982113.987:2): audit_backlog_limit=256 old=64 by auid=4294967295 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized eth0: no IPv6 routers present powernow-k8: Processor cpuid 6a0 not supported vmmon: module not supported by Novell, setting U taint flag. vmmon: module license 'unspecified' taints kernel. /dev/vmmon[3555]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[3555]: Module vmmon: initialized vmnet: module not supported by Novell, setting U taint flag. /dev/vmnet: open called by PID 3584 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: enabling the bridge bridge-eth0: up bridge-eth0: already up bridge-eth0: attached /dev/vmnet: open called by PID 3601 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 3640 (vmnet-netifup) /dev/vmnet: hub 2 does not exist, allocating memory. /dev/vmnet: port on hub 2 successfully opened /dev/vmnet: open called by PID 3676 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 3709 (vmnet-natd) /dev/vmnet: port on hub 2 successfully opened /dev/vmnet: open called by PID 3650 (vmnet-dhcpd) /dev/vmnet: port on hub 2 successfully opened /dev/vmnet: open called by PID 3771 (vmnet-natd) /dev/vmnet: hub 3 does not exist, allocating memory. /dev/vmnet: port on hub 3 successfully opened /dev/vmnet: open called by PID 3791 (vmnet-natd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened vmnet1: no IPv6 routers present vmnet2: no IPv6 routers present /dev/vmnet: open called by PID 3903 (vmnet-netifup) /dev/vmnet: port on hub 3 successfully opened /dev/vmnet: open called by PID 3930 (vmnet-netifup) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 3949 (vmnet-dhcpd) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 3940 (vmnet-dhcpd) /dev/vmnet: port on hub 3 successfully opened vmnet3: no IPv6 routers present vmnet8: no IPv6 routers present ip_tables: (C) 2000-2006 Netfilter Core Team Gruß Florian -- Um die Liste abzubestellen, schicken Sie eine Mail an: suse-linux-unsubscribe@suse.com Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: suse-linux-help@suse.com