Hallo liebe Selbsthilfegruppe, Gibts auf SLES9 noch andere Moeglichkeiten, CDs unter Linux zu brennen als mit cdrecord? Wir haben Probleme mit diesem Teil wegen dem ewigen Kleinkrieg zwischen Schilling und Suse und weil der Treiber fuer den CD-Brenner in den HP Proliant ML350 Servern offenbar nicht ganz ausgereift ist: ==CUT== /usr/bin/cdrecord dev=ATAPI:0,0,0 speed=8 -eject /tmp/tgd_export.iso /usr/bin/cdrecord: No write mode specified. /usr/bin/cdrecord: Asuming -tao mode. /usr/bin/cdrecord: Future versions of cdrecord may have different drive dependent defaults. /usr/bin/cdrecord: Continuing in 5 seconds... scsidev: 'ATAPI:0,0,0' devname: 'ATAPI' scsibus: 0 target: 0 lun: 0 Use of ATA is preferred over ATAPI. Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0E 00 00 00 00 09 00 00 00 00 00 00 00 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x09 Qual 0x00 (track following error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 9.209s timeout 40s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. /usr/bin/cdrecord: Input/output error. close track/session: scsi sendcmd: no error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 2C 04 00 00 00 00 00 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x04 (current program area is empty) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.001s timeout 480s cmd finished after 0.001s timeout 480s /usr/bin/cdrecord: Cannot fixate disk. ==CUT== Wenn ich das neueste cdrecord 2.01 vom Schilling unter SLES9 kompiliere und dann auf der HP Prolient ML 350 Hardware laufen lasse, schreit es schon mal um Hilfe: ==CUT== kra01:/opt/cdrtools-2.01/bin # chmod 666 /dev/pg* kra01:/opt/cdrtools-2.01/bin # ls -al /dev/pg* crw-rw-rw- 1 root disk 97, 0 Nov 17 2005 /dev/pg0 crw-rw-rw- 1 root disk 97, 1 Nov 17 2005 /dev/pg1 crw-rw-rw- 1 root disk 97, 2 Nov 17 2005 /dev/pg2 crw-rw-rw- 1 root disk 97, 3 Nov 17 2005 /dev/pg3 kra01:/opt/cdrtools-2.01/bin # ./cdrecord -scanbus Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J\uffffrg Schilling ./cdrecord: Warning: Running on Linux-2.6.5-7.244-smp ./cdrecord: There are unsettled issues with Linux-2.5 and newer. ./cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. ./cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open SCSI driver. ./cdrecord: For possible targets try 'cdrecord -scanbus'. ./cdrecord: For possible transport specifiers try 'cdrecord dev=help'. ==CUT== Gruss, Bernd