![](https://seccdn.libravatar.org/avatar/3c325ab0ff9996112ea897f725b0c5aa.jpg?s=120&d=mm&r=g)
Hi Linuxer, leider habe ich noch keine Lösung gefunden aber ich füge noch eine Ausgabe von cat /proc/bus/ieee1394/devices unten hinzu. Vielleicht fällt jemandem irgendwas ein... Roman Langolf schrieb:
Hallo ihr alle,
ich habe Adaptec (AFW-4300A) FireWire-Karte gekauft, laut: http://www.linux1394.org/view_device.php?id=476
funktioniert die Karte einwandfrei, bei mir aber leider nicht.
Was ich schon gemacht habe:
lspci: 00:0a.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8024 _____
Ich habe neuen Kernel (2.4.23-pre4) mit folgenden Optionen kompiliert:
####### <M> IEEE 1394 (FireWire) support (EXPERIMENTAL) --- Device Drivers <M> Texas Instruments PCILynx support <M> OHCI-1394 support --- Protocol Drivers <M> OHCI-1394 Video support <M> SBP-2 support (Harddisks etc.) [*] Enable Phys DMA support for SBP2 (Debug) <M> Ethernet over 1394 <M> OHCI-DV I/O support <M> Raw IEEE1394 I/O support <M> IEC61883-1 Plug support <M> IEC61883-6 (Audio transmission) support [*] Excessive debugging output [*] OUI Database built-in
Dann habe ich module geladen: modprobe ohci1394 modprobe raw1394
####### lsmod: raw1394 23020 0 (unused) ohci1394 28160 0 (unused) ieee1394 185824 0 [raw1394 ohci1394]
####### dmesg:
ohci1394: $Rev: 1010 $ Ben Collins
ohci1394_0: Remapped memory spaces reg 0xd0a72000 ohci1394_0: Soft reset finished ohci1394_0: Iso contexts reg: 000000a8 implemented: 0000000f ohci1394_0: 4 iso receive contexts available ohci1394_0: Iso contexts reg: 00000098 implemented: 000000ff ohci1394_0: 8 iso transmit contexts available ohci1394_0: GUID: 00309500:a0020ffd ohci1394_0: Receive DMA ctx=0 initialized ohci1394_0: Receive DMA ctx=0 initialized ohci1394_0: Transmit DMA ctx=0 initialized ohci1394_0: Transmit DMA ctx=1 initialized ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[ee004000-ee0047ff] Max Packet=[2048] ohci1394_0: request csr_rom address: c367b000 ohci1394_0: IntEvent: 00020010 ohci1394_0: irq_handler: Bus reset requested ohci1394_0: Cancel request received ohci1394_0: Got RQPkt interrupt status=0x00008409 ohci1394_0: Single packet rcv'd ohci1394_0: Got phy packet ctx=0 ... discarded ohci1394_0: IntEvent: 00010000 ohci1394_0: SelfID interrupt received (phyid 0, root) ohci1394_0: SelfID packet 0x807f8c56 received ieee1394: Including SelfID 0x568c7f80 ohci1394_0: SelfID for this node is 0x807f8c56 ohci1394_0: SelfID complete ohci1394_0: PhyReqFilter=ffffffffffffffff ieee1394: selfid_complete called with successful SelfID stage ... irm_id: 0xFFC0 node_id: 0xFFC0 ieee1394: NodeMgr: Processing host reset for knodemgrd_0 ieee1394: Initiating ConfigROM request for node 0-00:1023 ieee1394: send packet local: ffc00140 ffc0ffff f0000400 [......] ieee1394: NodeMgr: raw=0xe000a002 irmc=1 cmc=1 isc=1 bmc=0 pmc=0 cyc_clk_acc=0 max_rec=204 8 gen=0 lspd=2 [......] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00309500a0020ffd]
ieee1394: send packet 100: ffff0100 ffc0ffff f0000234 1f0000c0 ohci1394_0: Inserting packet for node 0-63:1023, tlabel=0, tcode=0x0, speed=0 ohci1394_0: Starting transmit DMA ctx=0 ohci1394_0: IntEvent: 00000001 ohci1394_0: Got reqTxComplete interrupt status=0x00008011 ohci1394_0: Packet sent to node 63 tcode=0x0 tLabel=0x00 ack=0x11 spd=0 data=0x1F0000C0 ct x=0 raw1394: /dev/raw1394 device initialized
####### testlibraw meint: couldn't get handle: No such device This probably means that you don't have raw1394 support in the kernel or that you haven't loaded the raw1394 module.
Zur Not habe ich noch pcilynx probiert hochzuladen:
####### $: modprobe pcilynx
/lib/modules/2.4.23-pre4/kernel/drivers/ieee1394/pcilynx.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.23-pre4/kernel/drivers/ieee1394/pcilynx.o: insmod /lib/modules/2.4.23-pre4/kernel/drivers/ieee1394/pcilynx.o failed /lib/modules/2.4.23-pre4/kernel/drivers/ieee1394/pcilynx.o: insmod pcilynx failed
#### ls -ahl /dev/video1394 crw-rw-rw- 1 root root 172, 0 Sep 15 18:48 /dev/video1394 ls -ahl /dev/raw1394 crw-rw-rw- 1 root root 172, 0 Sep 15 18:49 /dev/raw1394
######### cat /proc/bus/ieee1394/devices Node[0-00:1023] GUID[00309500a0020ffd]: Vendor ID: `Linux OHCI-1394' [0x080028] Capabilities: 0x0083c0 Bus Options: IRMC(1) CMC(1) ISC(1) BMC(0) PMC(0) GEN(0) LSPD(2) MAX_REC(2048) CYC_CLK_ACC(0) Host Node Status: Host Driver : ohci1394 Nodes connected : 1 Nodes active : 1 SelfIDs received: 1 Irm ID : [0-00:1023] BusMgr ID : [0-63:1023] In Bus Reset : no Root : yes Cycle Master : yes IRM : yes Bus Manager : no Ich verstehe nicht wo das Problem ist, wieso findet testlibraw die Karte nicht? Dank&Gruß! Roman