Sollte mich "DriveReady SeekComplete Error" stören? Kündigt sich da eine defekte HD an? # dmesg Linux version 2.4.21-87-athlon (root@i386.suse.de) (gcc version 3.3.1 (SuSE Linux)) #1 Thu Sep 18 10:18:21 UTC 2003 ... VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1 ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:DMA ... hdd: Maxtor 96147H6, ATA DISK drive ... hdd: attached ide-disk driver. hdd: host protected area => 1 hdd: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63, UDMA(100) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 hdb8 hdb9 > hdd: hdd1 ... EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,71), internal journal LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded Adding Swap: 200804k swap-space (priority 42) hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } ide1: reset: success hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } ide1: reset: success sv:~ # hdparm -t /dev/hdd /dev/hdd: Timing buffered disk reads: 64 MB in 2.26 seconds = 28.32 MB/sec Al -- Infos zu Softwarepatenten: http://swpat.ffii.org/index.de.html http://petition.eurolinux.org/index.html?LANG=de