Hallo, ich habe Probleme mit meinem X-Server: Meine Hardware: - Grafikkarte: Miro Crystal 20SV - Monitor: MAG DX17S läuft unter SuSE Linux 5.3 von der Linux aktuell! CD Juli 98. Der X-Server verwirft alle Auflösungen außer 640x480. Als erstes meldet er, daß er 1280x1024 löscht, da dieser Modus eine vertikale Refresh-Rate von 49,04Hz benötigt: (--) S3: Mode "1280x1024" needs vert refresh rate of 49.04 Hz. Deleted. Bei meiner letzten Konfiguration unter SuSE Linux 5.0 lief dieser Modus jedoch noch. Die weiteren Modi werden wegen nicht definierter "dot-clock" verworfen: (--) S3: There is no defined dot-clock matching mode "1152x864" (--) S3: Removing mode "1152x864" from list of valid modes. (--) S3: There is no defined dot-clock matching mode "1024x768" ... Wie kann ich diese "dot-clock" einstellen? Früher lief X immer ohne manuelles Ändern der Config und das Ergebnis ändert sich auch nicht, ob ich SaX, XF86Setup oder xf86config benutze. Die volle Ausgabe des X-Servers, sowie meine XF86Config hängen als Attachment an dieser Mail. Ich wäre dankbar, wenn jemand mir einen Tip geben könnte, wie ich den X-Server wieder vollständig zu laufen bekomme. Ciao Jens -- Jens D. Baumgartner <jdb@gmx.net> </PRE> <PRE> XFree86 Version 3.3.2.3 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: July 15 1998 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see <A HREF="http://www.XFree86.Org/FAQ"><A HREF="http://www.XFree86.Org/FAQ</A">http://www.XFree86.Org/FAQ</A</A>>) Operating System: Linux 2.0.33 i686 [ELF] Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) newmmio, mmio_928, s3_generic (using VT number 7) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: rules: "xfree86" (**) XKB: model: "pc102" (**) XKB: layout: "de" (**) XKB: variant: "nodeadkeys" (**) Mouse: type: Microsoft, device: /dev/ttyS0, baudrate: 1200 (**) Mouse: buttons: 3, 3 button emulation (timeout: 200ms) (**) S3: Graphics device ID: "Primary Card" (**) S3: Monitor ID: "Primary Monitor" (--) S3: Mode "1280x1024" needs vert refresh rate of 49.04 Hz. Deleted. Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist. Entry deleted from font path. Warning: The directory "/usr/X11R6/lib/X11/fonts/Type1" does not exist. Entry deleted from font path. Warning: The directory "/usr/X11R6/lib/X11/fonts/Speedo" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi" (--) S3: PCI: 964 rev 0, Linear FB @ 0xf0000000 (--) S3: chipset: 964 rev. 0 (--) S3: chipset driver: mmio_928 (--) S3: card type: PCI (--) S3: MIRO 20SV Rev.2 or newer detected. please use Option "s3_964_bt485_vclk" (**) S3: videoram: 2048k (--) S3: Detected an AT&T 20C505 RAMDAC (--) S3: Ramdac type: att20c505 (**) S3: Ramdac speed: 135 MHz (--) S3: clocks: 25.17 28.32 28.32 0.00 25.17 28.32 28.32 28.32 (--) S3: clocks: 25.17 28.32 28.32 28.32 25.17 28.32 28.32 28.32 (--) S3: Maximum allowed dot-clock: 135.000 MHz (--) S3: There is no defined dot-clock matching mode "1152x864" (--) S3: Removing mode "1152x864" from list of valid modes. (--) S3: There is no defined dot-clock matching mode "1024x768" (--) S3: Removing mode "1024x768" from list of valid modes. (--) S3: There is no defined dot-clock matching mode "800x600" (--) S3: Removing mode "800x600" from list of valid modes. (**) S3: Mode "640x480": mode clock = 25.000, clock used = 25.170 (--) S3: Operating RAMDAC in pixel multiplex mode (--) S3: Using hardware cursor from Bt485/20C505 RAMDAC (**) S3: Using 16 bpp. Color weight: 565 (**) S3: Virtual resolution set to 1152x864 (--) S3: Local bus LAW is 0xF0000000 (--) S3: Using a banksize of 2048k, line width of 1152 (--) S3: Using a single 46x46 area at (1106,864) for expanding pixmaps (--) S3: Using 16 planes of 1106x46 at (0,864) aligned 8 as font cache Starting kaudioserver...Done. Starting kwmsound...Done. Starting kfm -d...Done. Starting kcontrol -init...Done. Starting kbgndwm...Done. Starting krootwm...Done. Starting kpanel...Done. Some pixmaps are not valid: GimmickMode dissabled KBackground::KBackground KScreenSaver::KScreenSaver KGeneral::KGeneral waiting for X server to shut down Starting audio server with talk id 1. </PRE> <PRE> # SaX autogenerated XF86Config file # This file was generated from the SaX # Version: 1.2 - sax@suse.de # Date: Tue Sep 1 15:27:01 MEST 1998 Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" EndSection Section "ServerFlags" AllowMouseOpenFail EndSection Section "Keyboard" Protocol "Standard" XkbRules "xfree86" XkbModel "pc102" XkbLayout "de" XkbVariant "nodeadkeys" EndSection Section "Pointer" Protocol "Microsoft" Device "/dev/ttyS0" SampleRate 0 Emulate3Buttons Emulate3Timeout 200 BaudRate 1200 EndSection Section "Monitor" Identifier "Primary Monitor" VendorName "MAG" ModelName "DX17S" HorizSync 24-68 VertRefresh 50-100 Modeline "1024x768" 57.00 1024 1048 1104 1200 768 777 784 805 Modeline "1024x768" 89.19 1024 1064 1160 1336 768 772 782 785 Modeline "640x480" 25.00 640 648 672 792 480 493 497 535 Modeline "640x480" 55.74 640 664 720 832 480 527 537 670 Modeline "800x600" 34.00 800 816 848 904 600 609 614 637 Modeline "800x600" 69.68 800 832 904 1040 600 617 627 670 Modeline "1280x1024" 78.00 1280 1312 1392 1512 1024 1031 1038 1052 Modeline "1280x1024" 111.49 1280 1328 1448 1664 1024 1029 1039 1046 Modeline "1152x864" 100.34 1152 1200 1304 1504 864 870 880 889 EndSection Section "Device" Identifier "Primary Card" VendorName "MIRO" BoardName "CRYSTAL 20SV" VideoRam 2048 DacSpeed 135 135 135 135 EndSection Section "Screen" Driver "accel" Device "Primary Card" Monitor "Primary Monitor" DefaultColorDepth 16 SubSection "Display" Depth 8 Modes "1152x864" "1280x1024" "1024x768" "800x600" "640x480" Virtual 1280 1024 EndSubSection SubSection "Display" Depth 16 Modes "1152x864" "1024x768" "800x600" "640x480" Virtual 1152 864 EndSubSection SubSection "Display" Depth 24 Modes "800x600" "640x480" Virtual 800 600 EndSubSection SubSection "Display" Depth 32 Modes "800x600" "640x480" Virtual 800 600 EndSubSection EndSection Section "Screen" Driver "SVGA" Device "Primary Card" Monitor "Primary Monitor" DefaultColorDepth 16 SubSection "Display" Depth 8 Modes "1152x864" "1280x1024" "1024x768" "800x600" "640x480" Virtual 1280 1024 EndSubSection SubSection "Display" Depth 16 Modes "1152x864" "1024x768" "800x600" "640x480" Virtual 1152 864 EndSubSection SubSection "Display" Depth 24 Modes "800x600" "640x480" Virtual 800 600 EndSubSection SubSection "Display" Depth 32 Modes "800x600" "640x480" Virtual 800 600 EndSubSection EndSection