Hallo, wertet der systemd die inittab aus? Nach einem Update von OS 11.4 auf 12.1 startet der Dienst c2faxrecv nicht mehr. Er wird am Ende der inittab aufgerufen. Da der Dienst nicht mehr startet, aber jahrelang problemlos funktionierte bin ich mir nicht sicher ob die inittab vom systemd überhaupt ausgewertet wird. Falls inittab nicht mehr ausgewertet wird, sorgt das Update für eine Umsetzung der Einträge in der inittab? Beim manuelle Aufrufen von /usr/bin/c2faxrecv -q "/var/spool/fax" startet der Dienst. In welchem log kann man denn die Aktionen vom systemd und init nachlesen? Eingesetzt wird OS 12.1 64-bit. ~> cat /etc/inittab # # /etc/inittab # # Copyright (c) 1996-2002 SuSE Linux AG, Nuernberg, Germany. All rights reserved. # # Author: Florian La Roche, 1996 # Please send feedback to http://www.suse.de/feedback # # This is the main configuration file of /sbin/init, which # is executed by the kernel on startup. It describes what # scripts are used for the different run-levels. # # All scripts for runlevel changes are in /etc/init.d/. # # This file may be modified by SuSEconfig unless CHECK_INITTAB # in /etc/sysconfig/suseconfig is set to "no" # # The default runlevel is defined here id:3:initdefault: # First script to be executed, if not booting in emergency (-b) mode si::bootwait:/etc/init.d/boot # /etc/init.d/rc takes care of runlevel handling # # runlevel 0 is System halt (Do not use this for initdefault!) # runlevel 1 is Single user mode # runlevel 2 is Local multiuser without remote network (e.g. NFS) # runlevel 3 is Full multiuser with network # runlevel 4 is Not used # runlevel 5 is Full multiuser with network and xdm # runlevel 6 is System reboot (Do not use this for initdefault!) # l0:0:wait:/etc/init.d/rc 0 l1:1:wait:/etc/init.d/rc 1 l2:2:wait:/etc/init.d/rc 2 l3:3:wait:/etc/init.d/rc 3 #l4:4:wait:/etc/init.d/rc 4 l5:5:wait:/etc/init.d/rc 5 l6:6:wait:/etc/init.d/rc 6 # what to do in single-user mode ls:S:wait:/etc/init.d/rc S ~~:S:respawn:/sbin/sulogin # what to do when CTRL-ALT-DEL is pressed ca::ctrlaltdel:/sbin/shutdown -r -t 4 now # special keyboard request (Alt-UpArrow) # look into the kbd-0.90 docs for this kb::kbrequest:/bin/echo "Keyboard Request -- edit /etc/inittab to let this work." # what to do when power fails/returns pf::powerwait:/etc/init.d/powerfail start pn::powerfailnow:/etc/init.d/powerfail now #pn::powerfail:/etc/init.d/powerfail now po::powerokwait:/etc/init.d/powerfail stop # for ARGO UPS sh:12345:powerfail:/sbin/shutdown -h now THE POWER IS FAILING # getty-programs for the normal runlevels # <id>:<runlevels>:<action>:<process> # The "id" field MUST be the same as the last # characters of the device (after "tty"). 1:2345:respawn:/sbin/mingetty --noclear tty1 2:2345:respawn:/sbin/mingetty tty2 3:2345:respawn:/sbin/mingetty tty3 4:2345:respawn:/sbin/mingetty tty4 5:2345:respawn:/sbin/mingetty tty5 6:2345:respawn:/sbin/mingetty tty6 # #S0:12345:respawn:/sbin/agetty -L 9600 ttyS0 vt102 #cons:12345:respawn:/sbin/smart_agetty -L 38400 console # # Note: Do not use tty7 in runlevel 3, this virtual line # is occupied by the programm xdm. # # This is for the package xdmsc, after installing and # and configuration you should remove the comment character # from the following line: #7:3:respawn:+/etc/init.d/rx tty7 # modem getty. # mo:235:respawn:/usr/sbin/mgetty -s 38400 modem # fax getty (hylafax) # mo:35:respawn:/usr/lib/fax/faxgetty /dev/modem # vbox (voice box) getty # I6:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI6 # I7:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI7fa fr:35:respawn:/usr/bin/c2faxrecv -q "/var/spool/fax" # end of /etc/inittab #> telinit q #> tail -f /var/log/messages Jan 24 08:50:50 server systemd[1]: Reloading. Jan 24 08:50:50 server systemd[1]: [/etc/init.d/slpd:11] Failed to add LSB Provides name openslp.service, ignoring: File exists Jan 24 08:50:50 server systemd[1]: [/etc/init.d/cups:19] Failed to add LSB Provides name cupsd.service, ignoring: File exists Jan 24 08:51:15 server HylaFAX[25402]: checkHostIdentity("localhost") Jan 24 08:51:15 server HylaFAX[25402]: Parsing hostPort(): "EPRT" Jan 24 08:51:15 server HylaFAX[25402]: Parsing "|1|127.0.0.1|58162|" Jan 24 08:51:15 server HylaFAX[25402]: `-> s.length() = 19 Jan 24 08:51:15 server HylaFAX[25402]: `-> s[0] = '|' Jan 24 08:51:15 server HylaFAX[25402]: `-> s[2] = '|' Jan 24 08:51:15 server HylaFAX[25402]: `-> s[18] = '|' Jan 24 08:51:15 server HylaFAX[25402]: Looks like extended syntax: "|1| 127.0.0.1|58162|" [7C: |] Jan 24 08:51:15 server HylaFAX[25402]: `-> Got a: 127.0.0.1[13] Jan 24 08:51:15 server HylaFAX[25402]: `-> Got a: 58162[19] Jan 24 08:51:15 server HylaFAX[25402]: Parsed: Family 1 Address 127.0.0.1 Port 58162 ~> faxstat HylaFAX scheduler on server.home.haa: Running Modem faxCAPI (+49.7042.812781): Terminated -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org