Hallo! k3b und xcdroast (beide von der SuSE 9.0 -CD's) können keine Audio-CD's brennen. xcdroast bringt mir folgende Meldungen: Calling: /usr/X11R6/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,0,0" gracetime=2 fs=4096k driveropts=burnfree,noforcespeed -v -useinfo speed=52 -eject -pad -audio "/home/fahnenju/brennen/80's Pop - Nena - 99 Red Balloons.wav" ... scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.25 cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.75-resmgr-patch '@(#)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone 2.01a18-dvd (i686-suse-linux) Copyright (C) 1995-2003 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to <warly@mandrakesoft.com>. Note: The author of cdrecord is not to be bothered with problems in this version. TOC Type: 0 = CD-DA Using libscg version 'schily-0.7' Driveropts: 'burnfree,noforcespeed' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'AOPEN ' Identifikation : 'CD-RW CRW5232 ' Revision : '1.02' Device seems to be: Generic mmc CD-RW. Current: 0x0009 Profile: 0x0008 Profile: 0x0009 (current) Profile: 0x000A Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R Drive buf size : 1359872 = 1328 KB FIFO size : 4194304 = 4096 KB pregap1: -1 Track 01: audio 39 MB (03:54.31) no preemp pad Total size: 39 MB (03:54.32) = 17574 sectors Lout start: 39 MB (03:56/24) = 17574 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11634 (97:26/66) ATIP start of lead out: 359846 (79:59/71) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359846 Blocks current: 359846 Blocks remaining: 342272 Forcespeed is OFF. Starting to write CD/DVD at speed 52 in real TAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is ON. Performing OPC... cdrecord: Input/output error. send opc: scsi sendcmd: no error CDB: 54 01 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0C 00 00 00 00 3A 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 5.720s timeout 60s cdrecord: OPC failed. Writing time: 10.864s BURN-Free was never needed. cdrecord: fifo had 64 puts and 0 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. k3b meckert, das das Audioformat nicht kodiert werden kann. Ich hab's mit mp3 und wav -Dateien probiert. Immer ohne Erfolg. xcdroast bemängelt auch noch: cdrecord: OPC failed. Gruß, Jürgen