Hallo ihr alle,
ich habe Adaptec (AFW-4300A) FireWire-Karte gekauft, laut:
http://www.linux1394.org/view_device.php?id=476
funktioniert die Karte einwandfrei, bei mir aber leider nicht.
Was ich schon gemacht habe:
lspci:
00:0a.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8024
_____
Ich habe neuen Kernel (2.4.23-pre4) mit folgenden Optionen kompiliert:
#######
<M> IEEE 1394 (FireWire) support (EXPERIMENTAL)
--- Device Drivers
<M> Texas Instruments PCILynx support
<M> OHCI-1394 support
--- Protocol Drivers
<M> OHCI-1394 Video support
<M> SBP-2 support (Harddisks etc.)
[*] Enable Phys DMA support for SBP2 (Debug)
<M> Ethernet over 1394
<M> OHCI-DV I/O support
<M> Raw IEEE1394 I/O support
<M> IEC61883-1 Plug support
<M> IEC61883-6 (Audio transmission) support
[*] Excessive debugging output
[*] OUI Database built-in
Dann habe ich module geladen:
modprobe ohci1394
modprobe raw1394
#######
lsmod:
raw1394 23020 0 (unused)
ohci1394 28160 0 (unused)
ieee1394 185824 0 [raw1394 ohci1394]
#######
dmesg:
ohci1394: $Rev: 1010 $ Ben Collins
ohci1394_0: Remapped memory spaces reg 0xd0a72000
ohci1394_0: Soft reset finished
ohci1394_0: Iso contexts reg: 000000a8 implemented: 0000000f
ohci1394_0: 4 iso receive contexts available
ohci1394_0: Iso contexts reg: 00000098 implemented: 000000ff
ohci1394_0: 8 iso transmit contexts available
ohci1394_0: GUID: 00309500:a0020ffd
ohci1394_0: Receive DMA ctx=0 initialized
ohci1394_0: Receive DMA ctx=0 initialized
ohci1394_0: Transmit DMA ctx=0 initialized
ohci1394_0: Transmit DMA ctx=1 initialized
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[ee004000-ee0047ff]
Max Packet=[2048]
ohci1394_0: request csr_rom address: c367b000
ohci1394_0: IntEvent: 00020010
ohci1394_0: irq_handler: Bus reset requested
ohci1394_0: Cancel request received
ohci1394_0: Got RQPkt interrupt status=0x00008409
ohci1394_0: Single packet rcv'd
ohci1394_0: Got phy packet ctx=0 ... discarded
ohci1394_0: IntEvent: 00010000
ohci1394_0: SelfID interrupt received (phyid 0, root)
ohci1394_0: SelfID packet 0x807f8c56 received
ieee1394: Including SelfID 0x568c7f80
ohci1394_0: SelfID for this node is 0x807f8c56
ohci1394_0: SelfID complete
ohci1394_0: PhyReqFilter=ffffffffffffffff
ieee1394: selfid_complete called with successful SelfID stage ...
irm_id: 0xFFC0 node_id:
0xFFC0
ieee1394: NodeMgr: Processing host reset for knodemgrd_0
ieee1394: Initiating ConfigROM request for node 0-00:1023
ieee1394: send packet local: ffc00140 ffc0ffff f0000400
[......]
ieee1394: NodeMgr: raw=0xe000a002 irmc=1 cmc=1 isc=1 bmc=0 pmc=0
cyc_clk_acc=0 max_rec=204 8 gen=0 lspd=2
[......]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00309500a0020ffd]
ieee1394: send packet 100: ffff0100 ffc0ffff f0000234 1f0000c0
ohci1394_0: Inserting packet for node 0-63:1023, tlabel=0, tcode=0x0,
speed=0
ohci1394_0: Starting transmit DMA ctx=0
ohci1394_0: IntEvent: 00000001
ohci1394_0: Got reqTxComplete interrupt status=0x00008011
ohci1394_0: Packet sent to node 63 tcode=0x0 tLabel=0x00 ack=0x11
spd=0 data=0x1F0000C0 ct
x=0
raw1394: /dev/raw1394 device initialized
#######
testlibraw meint:
couldn't get handle: No such device
This probably means that you don't have raw1394 support in the kernel
or that you haven't loaded the raw1394 module.
Zur Not habe ich noch pcilynx probiert hochzuladen:
#######
$: modprobe pcilynx
/lib/modules/2.4.23-pre4/kernel/drivers/ieee1394/pcilynx.o:
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters
/lib/modules/2.4.23-pre4/kernel/drivers/ieee1394/pcilynx.o: insmod
/lib/modules/2.4.23-pre4/kernel/drivers/ieee1394/pcilynx.o failed
/lib/modules/2.4.23-pre4/kernel/drivers/ieee1394/pcilynx.o: insmod
pcilynx failed
####
ls -ahl /dev/video1394
crw-rw-rw- 1 root root 172, 0 Sep 15 18:48 /dev/video1394
ls -ahl /dev/raw1394
crw-rw-rw- 1 root root 172, 0 Sep 15 18:49 /dev/raw1394
Ich verstehe nicht wo das Problem ist, wieso findet er die Karte
nicht?
THX
Roman
--
http://www.jesus.de
http://www.thehope.de
http://www.ec-thueringen.de
