Sensors, keine negativen min-max-Angaben

31 Mar 2005

      Hallo zusammen,
bei meinem ASUS P4B533 tut sensors nicht richtig.

in der sensors.conf steht:

##############################################
chip "asb100-*"
    set vrm 9.0

# 20050331 JK
    label in0 "VCore 1"
    set in0_min vid * 1.12
    set in0_max vid * 1.25

    label in1 "VCore 2"
    ignore in1
    set in1_min vid * 0.95
    set in1_max vid * 1.05

    label in2 "+3.3V"
    set in2_min 3.3 * 0.95
    set in2_max 3.3 * 1.05

    label in3 "+5V"
    compute in3 1.68 * @ ,  @ / 1.68
    set in3_min 5.0 * 0.95
    set in3_max 5.0 * 1.05

    label in4 "+12V"
    compute in4 3.8 * @ , @ / 3.8
    set in4_min 12  * 0.90
    set in4_max 12  * 1.10

    label in5 "-12V (reserved)"
    compute in5 -@ * 3.97 ,  -@ / 3.97
    set in5_max -12 * 0.90
    set in5_min -12 * 1.10

    label in6 "-5V (reserved)"
    #ignore in6
    compute in6 -@ * 1.666 , -@ / 1.666
    set in6_max -5  * 0.95
    set in6_min -5  * 1.05

    label temp1 "M/B Temp"
    set temp1_over 45
    set temp1_hyst 40

    label temp2 "CPU Temp (Intel)"
    #ignore temp2
    set temp2_over 60
    set temp2_hyst 50

    # PWRTMP connector on P4S333, for external sensor
    label temp3 "Power Temp"
    ignore temp3
    set temp3_over 45
    set temp3_hyst 40

    # Used for Athlon diode, ignore for P4S333
    label temp4 "CPU Temp (AMD)"
    set temp4_over 60
    set temp4_hyst 50
    ignore temp4

    label fan1 "CPU Fan"
    set fan1_div 4
    set fan1_min 2000

#    label fan2 "Chassis Fan"
#   set fan2_div 2
#   set fan2_min 4000
#
#   label fan3 "Power Fan"
#   set fan3_div 2
#   set fan3_min 4000
    ignore fan2
    ignore fan3

######################

 in der Shell erhalte ich dann:
################################

johannes-02:/etc # sensors
eeprom-i2c-0-51
Adapter: SMBus I801 adapter at e800
Memory type:            DDR SDRAM DIMM
Memory size (MB):       512

eeprom-i2c-0-50
Adapter: SMBus I801 adapter at e800
Memory type:            DDR SDRAM DIMM
Memory size (MB):       512

asb100-i2c-0-2d
Adapter: SMBus I801 adapter at e800
VCore 1:   +1.60 V  (min =  +1.50 V, max =  +1.68 V)
+3.3V:     +3.39 V  (min =  +3.12 V, max =  +3.46 V)
+5V:       +5.05 V  (min =  +4.73 V, max =  +5.24 V)
+12V:     +11.43 V  (min = +10.76 V, max = +13.19 V)
-12V (reserved):
          -11.94 V  (min =  -0.00 V, max =  -0.00 V)
-5V (reserved):
           -5.01 V  (min =  -0.00 V, max =  -0.00 V)
CPU Fan:  2311 RPM  (min = 1997 RPM, div = 4)
M/B Temp:    +32°C  (high =   +45°C, hyst =   +40°C)
CPU Temp (Intel):
             +32°C  (high =   +60°C, hyst =   +50°C)
vid:      +1.350 V
alarms:

johannes-02:/etc # sensors -v
sensors version 2.8.6
###########################################

liegt das an sensors, an der Version, oder muß ich damit leben?

Danke und Gruß
Johannes

Sensors, keine negativen min-max-Angaben

Johannes Kapune