Christian Boltz schrieb:
Wenn es nach Akzeptieren des Host-Keys immer noch nicht geht, lösche mal auf beiden Rechnern ~/.ssh (naja, known_hosts kannst Du behalten) und folge anschließend der Anleitung in der FAQ:
10.3. Wie erstellt man einen SSH-Key? Wie kommt der Key auf den Zielrechner? http://suse-linux-faq.koehntopp.de/q/q-ssh-keygen.html
habe ich gemacht: ralfk@linux:~> ssh-keygen -t dsa -b 2048 Generating public/private dsa key pair. Enter file in which to save the key (/home/ralf/.ssh/id_dsa): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /home/ralf/.ssh/id_dsa. Your public key has been saved in /home/ralf/.ssh/id_dsa.pub. ralfk@sweaty:~/.ssh> ll -rw-r--r-- 1 ralfk users 1113 2005-10-22 08:20 authorized_keys Beim Einloggen wird aber immer noch nach dem Passwort des Users Ralfk gefragt und nicht wie erwartet die Passphrase des privaten Schlüssels. ralfk@linux:~> ssh -vvvv sweaty OpenSSH_3.8p1, SSH protocols 1.5/2.0, OpenSSL 0.9.7d 17 Mar 2004 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to sweaty [192.168.0.6] port 22. debug1: Connection established. debug1: identity file /home/ralf/.ssh/identity type -1 debug1: identity file /home/ralf/.ssh/id_rsa type -1 debug3: Not a RSA1 key file /home/ralf/.ssh/id_dsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'Proc-Type:' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'DEK-Info:' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/ralf/.ssh/id_dsa type 2 debug1: Remote protocol version 1.99, remote software version OpenSSH_3.8p1 debug1: match: OpenSSH_3.8p1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_3.8p1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_init: found hmac-md5 debug1: kex: server->client aes128-cbc hmac-md5 none debug2: mac_init: found hmac-md5 debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 125/256 debug2: bits set: 525/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /home/ralf/.ssh/known_hosts debug3: check_host_in_hostfile: match line 1 debug3: check_host_in_hostfile: filename /home/ralf/.ssh/known_hosts debug3: check_host_in_hostfile: match line 1 debug1: Host 'sweaty' is known and matches the RSA host key. debug1: Found key in /home/ralf/.ssh/known_hosts:1 debug2: bits set: 494/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/ralf/.ssh/identity ((nil)) debug2: key: /home/ralf/.ssh/id_rsa ((nil)) debug2: key: /home/ralf/.ssh/id_dsa (0x808a538) debug1: Authentications that can continue: publickey,keyboard-interactive debug3: start over, passed a different list publickey,keyboard-interactive debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/ralf/.ssh/identity debug3: no such identity: /home/ralf/.ssh/identity debug1: Trying private key: /home/ralf/.ssh/id_rsa debug3: no such identity: /home/ralf/.ssh/id_rsa debug1: Offering public key: /home/ralf/.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,keyboard-interactive debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password: debug3: packet_send2: adding 32 (len 21 padlen 11 extra_pad 64) debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 0 debug3: packet_send2: adding 48 (len 10 padlen 6 extra_pad 64) debug1: Authentication succeeded (keyboard-interactive). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Entering interactive session. debug2: callback start debug2: ssh_session2_setup: id 0 debug2: channel 0: request pty-req debug3: tty_make_modes: ospeed 38400 debug3: tty_make_modes: ispeed 38400 debug3: tty_make_modes: 1 3 debug3: tty_make_modes: 2 28 debug3: tty_make_modes: 3 127 debug3: tty_make_modes: 4 21 debug3: tty_make_modes: 5 4 debug3: tty_make_modes: 6 0 debug3: tty_make_modes: 7 0 debug3: tty_make_modes: 8 17 debug3: tty_make_modes: 9 19 debug3: tty_make_modes: 10 26 debug3: tty_make_modes: 12 18 debug3: tty_make_modes: 13 23 debug3: tty_make_modes: 14 22 debug3: tty_make_modes: 18 15 debug3: tty_make_modes: 30 0 debug3: tty_make_modes: 31 0 debug3: tty_make_modes: 32 0 debug3: tty_make_modes: 33 0 debug3: tty_make_modes: 34 0 debug3: tty_make_modes: 35 0 debug3: tty_make_modes: 36 1 debug3: tty_make_modes: 37 0 debug3: tty_make_modes: 38 0 debug3: tty_make_modes: 39 0 debug3: tty_make_modes: 40 0 debug3: tty_make_modes: 41 0 debug3: tty_make_modes: 50 1 debug3: tty_make_modes: 51 1 debug3: tty_make_modes: 52 0 debug3: tty_make_modes: 53 1 debug3: tty_make_modes: 54 1 debug3: tty_make_modes: 55 1 debug3: tty_make_modes: 56 0 debug3: tty_make_modes: 57 0 debug3: tty_make_modes: 58 0 debug3: tty_make_modes: 59 1 debug3: tty_make_modes: 60 1 debug3: tty_make_modes: 61 1 debug3: tty_make_modes: 62 0 debug3: tty_make_modes: 70 1 debug3: tty_make_modes: 71 0 debug3: tty_make_modes: 72 1 debug3: tty_make_modes: 73 0 debug3: tty_make_modes: 74 0 debug3: tty_make_modes: 75 0 debug3: tty_make_modes: 90 1 debug3: tty_make_modes: 91 1 debug3: tty_make_modes: 92 0 debug3: tty_make_modes: 93 0 debug2: channel 0: request shell debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel 0: rcvd adjust 131072 Last login: Sat Oct 22 08:22:09 2005 from linux Gruß Ralf