Hallo Liste, Ich habe da ein massives Problem. Isdn mit capi von AVM für die Fritz karte PCI v2. Der Rechner wahl sich lauft ein ohne grunde nach additional information Aussgug aus der Messages Jan 30 06:35:37 mail pppd[852]: Connection terminated. Jan 30 06:35:37 mail pppd[852]: Script /etc/ppp/ip-down finished (pid 868), status = 0x0 Jan 30 06:35:37 mail pppd[852]: Connect time 0.2 minutes. Jan 30 06:35:37 mail pppd[852]: Sent 97 bytes, received 64 bytes. Jan 30 06:35:37 mail pppd[852]: tcflush failed: Input/output error Jan 30 06:35:37 mail pppd[852]: capiplugin: phase disconnect Jan 30 06:35:37 mail pppd[852]: Exit. Jan 30 06:35:37 mail kernel: kcapi: appl 1 down
Wahrum geht der da rein ??? Weiß jemand da was nicht mehr stimmt das geht auf einmal nicht mehr richtig. Kann mir da jemand Helfe.. Danke
Jan 30 06:37:12 mail pppd[953]: Plugin /etc/ppp/plugins/userpass.so loaded. Jan 30 06:37:12 mail pppd[953]: Plugin /etc/ppp/plugins/capiplugin.so loaded. Jan 30 06:37:12 mail pppd[953]: capiplugin: $Revision: 1.10 $ Jan 30 06:37:12 mail pppd[953]: capiconn: 1.4 Jan 30 06:37:12 mail kernel: kcapi: appl 1 up Jan 30 06:37:12 mail pppd[953]: pppd 2.4.0 started by root, uid 0 Jan 30 06:37:12 mail pppd[953]: capiplugin: phase serialconn Jan 30 06:37:12 mail pppd[953]: capiplugin: contr=1 Jan 30 06:37:12 mail pppd[953]: controller 1: listen_change_state 0 -> 1 Jan 30 06:37:12 mail pppd[953]: contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0 Jan 30 06:37:12 mail pppd[953]: controller 1: listen_change_state 1 -> 0 Jan 30 06:37:12 mail pppd[953]: plci_change_state:0x0 0 -> 1 event=1 Jan 30 06:37:12 mail pppd[953]: capiplugin: dial 0840840111 (hdlc) Jan 30 06:37:12 mail pppd[953]: plci_change_state:0x101 1 -> 2 event=3 Jan 30 06:37:15 mail pppd[953]: plci_change_state:0x101 2 -> 3 event=6 Jan 30 06:37:15 mail pppd[953]: ncci_change_state:0x101 0 -> 1 event=1 Jan 30 06:37:15 mail pppd[953]: ncci_change_state:0x10101 1 -> 3 event=3 Jan 30 06:37:15 mail pppd[953]: ncci_change_state:0x10101 3 -> 4 event=7 Jan 30 06:37:15 mail pppd[953]: ncci 0x10101 up Jan 30 06:37:15 mail pppd[953]: capiplugin: connected: "" -> "0840840111" outgoing (pcli=0x101/ncci=0x10101) Jan 30 06:37:15 mail pppd[953]: capiplugin: capitty not ready, waiting for driver ... Jan 30 06:37:15 mail kernel: kcapi: appl 1 ncci 0x10101 up Jan 30 06:37:16 mail pppd[953]: capiplugin: using /dev/capi/0: "" -> "0840840111" outgoing (pcli=0x101/ncci=0x10101) Jan 30 06:37:16 mail pppd[953]: using channel 6 Jan 30 06:37:16 mail pppd[953]: Using interface ppp0 Jan 30 06:37:16 mail pppd[953]: Connect: ppp0 <--> /dev/capi/0 Jan 30 06:37:16 mail pppd[953]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x63f617dc> <pcomp> <accomp>] Jan 30 06:37:16 mail pppd[953]: capiplugin: phase establish Jan 30 06:37:16 mail pppd[953]: rcvd [LCP ConfReq id=0x86 <auth chap MD5> <magic 0x1c1d5d88> <mrru 1524> <endpoint [local:74.62.77.6d.6c.70.70.70]>] Jan 30 06:37:16 mail pppd[953]: sent [LCP ConfRej id=0x86 <mrru 1524>] Jan 30 06:37:16 mail pppd[953]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x63f617dc> <pcomp> <accomp>] Jan 30 06:37:16 mail pppd[953]: rcvd [LCP ConfReq id=0x87 <auth chap MD5> <magic 0x1c1d5d88> <endpoint [local:74.62.77.6d.6c.70.70.70]>] Jan 30 06:37:16 mail pppd[953]: sent [LCP ConfNak id=0x87 <auth pap>] Jan 30 06:37:16 mail pppd[953]: rcvd [LCP ConfReq id=0x88 <auth pap> <magic 0x1c1d5d88> <endpoint [local:74.62.77.6d.6c.70.70.70]>] Jan 30 06:37:16 mail pppd[953]: sent [LCP ConfAck id=0x88 <auth pap> <magic 0x1c1d5d88> <endpoint [local:74.62.77.6d.6c.70.70.70]>] Jan 30 06:37:16 mail pppd[953]: capiplugin: phase authenticate Jan 30 06:37:16 mail pppd[953]: sent [PAP AuthReq id=0x1 user="spy" password=<hidden>] Jan 30 06:37:16 mail pppd[953]: rcvd [PAP AuthAck id=0x1 ""] Jan 30 06:37:16 mail pppd[953]: capiplugin: phase network Jan 30 06:37:16 mail pppd[953]: sent [IPCP ConfReq id=0x1 <addr 192.168.8.5> <compress VJ 0f 01> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>] Jan 30 06:37:16 mail pppd[953]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>] Jan 30 06:37:16 mail pppd[953]: rcvd [IPCP ConfReq id=0xbe <addr 213.3.64.1>] Jan 30 06:37:16 mail pppd[953]: sent [IPCP ConfAck id=0xbe <addr 213.3.64.1>] Jan 30 06:37:16 mail pppd[953]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>] Jan 30 06:37:16 mail pppd[953]: sent [IPCP ConfReq id=0x2 <addr 192.168.8.5> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>] Jan 30 06:37:16 mail pppd[953]: rcvd [LCP ProtRej id=0x9e 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f] Jan 30 06:37:16 mail pppd[953]: rcvd [IPCP ConfNak id=0x2 <addr 213.3.66.120> <ms-dns1 195.186.4.110> <ms-dns3 195.186.1.110>] Jan 30 06:37:16 mail pppd[953]: sent [IPCP ConfReq id=0x3 <addr 213.3.66.120> <ms-dns1 195.186.4.110> <ms-dns3 195.186.1.110>] Jan 30 06:37:16 mail pppd[953]: rcvd [IPCP ConfAck id=0x3 <addr 213.3.66.120> <ms-dns1 195.186.4.110> <ms-dns3 195.186.1.110>] Jan 30 06:37:16 mail pppd[953]: local IP address 213.3.66.120 Jan 30 06:37:16 mail pppd[953]: remote IP address 213.3.64.1 Jan 30 06:37:16 mail pppd[953]: primary DNS address 195.186.4.110 Jan 30 06:37:16 mail pppd[953]: secondary DNS address 195.186.1.110 Jan 30 06:37:16 mail pppd[953]: capiplugin: phase running Jan 30 06:37:16 mail pppd[953]: Script /etc/ppp/ip-up started (pid 955) Jan 30 06:37:16 mail ip-up: Modified /etc/resolv.conf for DNS at ppp0 Mfg Patrice